I wanted to make new site location signs for our RV Park, so after doing some research on exterior signs I decided to make them from PVC trim boards.
Жүктеу.....
Пікірлер: 23
@ianrepollet60166 ай бұрын
Thanks Ron
@ccfox-wecanmakeit95238 ай бұрын
very impressive
@robertmizek3315 Жыл бұрын
Excellent video, Ron!
@ronshapland7990
Жыл бұрын
Thank you Robert, I see people struggling to get started and just want to help them understand it is easy once you take the plunge.
@christophermalli9983 Жыл бұрын
very nice
@ronshapland7990
Жыл бұрын
Thanks Christopher, right now I am making some trail signs in the pattern of National forest signs, and some goodies to sell in our retail shop
@maxgarcia95125 ай бұрын
Thank you, Ron. Those signs were absolutely beautiful. But what type of bit did you use on that project? Thanks again!
@ronshapland7990
4 ай бұрын
Standard 1/4" spiral upcut spiral straight bit for clearing, and 60 degree vbit for the details and lettering
@mike8171 Жыл бұрын
Ron, this is a very good video! I can't find the kind of PVC you purchased at Home Depot. You purchased 11in Wide by 1in thick. Can you provide a brand name or SKU? Also, after you completed all the CNC work. Did you get a surface that did not need any further machining work? Did you coat the finished sign with any kind of finish? Thank you very much for your comments! Mike from Denver
@ronshapland7990
Жыл бұрын
Hi Mike - it's called Veranda - usually only available on line in these widths. I have purchased narrower material in the molding sections of my local store. Model 827000204 Internet# 316293572 Store SKU# 1006203520
@markmoulin41 Жыл бұрын
Does Shark make any models that are 36 or 48 by 48 in size, or just 24?
@user-pt4xj3uz9w2 ай бұрын
Ron, I am brand new to the CNC world and looking at the HD520. The video was great! What spindle were u using with the machine. Was is Bosch 1617? Also do you have any experience with the water cooled spindle from Next wave? Thank you! John
@ronshapland7990
2 ай бұрын
Hi Jerry, yes it is a Bosch 1617 EVS - I've just always liked the simplicity of using a Router and it's ability to use 1/2" shanked bits as needed. You would need to step up to their 3HP to do that and I can buy quite a few Bosch for that $$ :-)
@TimHallboxlearning Жыл бұрын
Great video!!! Could you do that with a 510?
@jamesbardinelli8435
Жыл бұрын
Do you own a 510 also? I just bought one and I'm trying to create a plan for a simple and sturdy bench
@ronshapland7990
Жыл бұрын
Sure, sorry I didn't even think about there would be comments on the video - darn rookie youtuber right? - you can easily do this on a 510 or HD500
@codyfawcett7287 Жыл бұрын
Are you able to x,y touch plate zero on the hd520? If so, how? I would love to be able to do thatl on mine.
@ronshapland7990
Жыл бұрын
only the Z - everything else is by sight, I usually use a v-bit
@markmoulin41 Жыл бұрын
No spoil Board?
@ronshapland7990
Жыл бұрын
Hi Mark, I have a spoil board but they are removeable slats - didn't need it for this instance as I wasn't cutting through which is when I generally use them.
@jamesbardinelli8435 Жыл бұрын
Hey Ron, did you purchase your pendant holder or make it? Do you have any pictures of CNC benches people use? I just bought an HD510!
@ronshapland7990
Жыл бұрын
Hi James, I purchased it on Amazon, any standard camera mount will work. Sorry I don't have any pics, but I know a lot of people use the shop stands from Rockler - www.rockler.com/rockler-customizable-shop-stand
@jamesbardinelli8435
Жыл бұрын
@@ronshapland7990 appreciate the info. I ended up making one and securing it with 3/8 black pipe and flange. It will swivel, but I have to loosen the bottom bolt. That sucker won't break off anytime soon!
Пікірлер: 23
Thanks Ron
very impressive
Excellent video, Ron!
@ronshapland7990
Жыл бұрын
Thank you Robert, I see people struggling to get started and just want to help them understand it is easy once you take the plunge.
very nice
@ronshapland7990
Жыл бұрын
Thanks Christopher, right now I am making some trail signs in the pattern of National forest signs, and some goodies to sell in our retail shop
Thank you, Ron. Those signs were absolutely beautiful. But what type of bit did you use on that project? Thanks again!
@ronshapland7990
4 ай бұрын
Standard 1/4" spiral upcut spiral straight bit for clearing, and 60 degree vbit for the details and lettering
Ron, this is a very good video! I can't find the kind of PVC you purchased at Home Depot. You purchased 11in Wide by 1in thick. Can you provide a brand name or SKU? Also, after you completed all the CNC work. Did you get a surface that did not need any further machining work? Did you coat the finished sign with any kind of finish? Thank you very much for your comments! Mike from Denver
@ronshapland7990
Жыл бұрын
Hi Mike - it's called Veranda - usually only available on line in these widths. I have purchased narrower material in the molding sections of my local store. Model 827000204 Internet# 316293572 Store SKU# 1006203520
Does Shark make any models that are 36 or 48 by 48 in size, or just 24?
Ron, I am brand new to the CNC world and looking at the HD520. The video was great! What spindle were u using with the machine. Was is Bosch 1617? Also do you have any experience with the water cooled spindle from Next wave? Thank you! John
@ronshapland7990
2 ай бұрын
Hi Jerry, yes it is a Bosch 1617 EVS - I've just always liked the simplicity of using a Router and it's ability to use 1/2" shanked bits as needed. You would need to step up to their 3HP to do that and I can buy quite a few Bosch for that $$ :-)
Great video!!! Could you do that with a 510?
@jamesbardinelli8435
Жыл бұрын
Do you own a 510 also? I just bought one and I'm trying to create a plan for a simple and sturdy bench
@ronshapland7990
Жыл бұрын
Sure, sorry I didn't even think about there would be comments on the video - darn rookie youtuber right? - you can easily do this on a 510 or HD500
Are you able to x,y touch plate zero on the hd520? If so, how? I would love to be able to do thatl on mine.
@ronshapland7990
Жыл бұрын
only the Z - everything else is by sight, I usually use a v-bit
No spoil Board?
@ronshapland7990
Жыл бұрын
Hi Mark, I have a spoil board but they are removeable slats - didn't need it for this instance as I wasn't cutting through which is when I generally use them.
Hey Ron, did you purchase your pendant holder or make it? Do you have any pictures of CNC benches people use? I just bought an HD510!
@ronshapland7990
Жыл бұрын
Hi James, I purchased it on Amazon, any standard camera mount will work. Sorry I don't have any pics, but I know a lot of people use the shop stands from Rockler - www.rockler.com/rockler-customizable-shop-stand
@jamesbardinelli8435
Жыл бұрын
@@ronshapland7990 appreciate the info. I ended up making one and securing it with 3/8 black pipe and flange. It will swivel, but I have to loosen the bottom bolt. That sucker won't break off anytime soon!