would I hafta drill the 2 holes for installing on BarkBuster frames?? I'm thinking of adding BBusters to a new Tenere 700 or a new Aprilia 660 Tuareg. Thanks for you reply.

Just bought these to fit on my KTM SMCR, I can recommend the quality, simply superb. Just about to fit so will let you know how it goes. Was worried my levers would hit the mirrors but plenty of room to negotiate them by adjusting the lever bracket in a bit. Hole drilling time!

@amgpower213

8 жыл бұрын

They fitted easily, just make sure your levers don't get in way, especially if you have bulky gloves. I moved my 'short' levers in a bit, particularly the clutch. Mirrors are excellent, you get used to them very quickly and zero vibration compared to stock KTM SMC mirrors. Slight vibration at high speeds however it is small and fast movement and does not blur the image behind you too badly.

@marioahec99

6 жыл бұрын

Where you buy it?

I own a set of CRG Hindsight mirrors, but they are not the LS version. Will this kit still work with them, or is the kit only compatible with the Hindsight LS mirrors?

Awesome new product ! Would like to see picture of front & back of motorcycle with both mirrors in position .

These are really interesting 🧐 ... cool idea.

@RottweilerPerformance

3 жыл бұрын

Oddly enough these ended up to be one of our most popular products. People have loved these for about 8 years now and we have been humbled at the response.

Got a pair ordered today for my KTM 390 ADVENTURE! 👍🏽

@RottweilerPerformance

3 жыл бұрын

Awesome! Let us know how you like them on that bike!

Would theses give less wind buffeting than the original Ktm adventure mirrors ?

Nice looking set up! What kind of hand guards are you using?

@RottweilerPerformance

5 жыл бұрын

These are factory KTM big bike hand guards. I hope this question was worth waiting 5 years for... :)

Do you ship to Mexico?

next time wear a white shirt, for a better background.

Bought them for my Husky 701 they are pretty nice but at more than 60kmh they vibrate a lot and rear view not so great. Is this standard? I would have expected a lot better for this price.

Are they only for KTM or can I fit them on my V-Strom hand guards?

@RottweilerPerformance

5 жыл бұрын

They were designed for KTM handguards, but many people over the years have managed to get them on everything from Ducati Multistrada's to enduro bikes. All you really need to do is drill two holes creatively and that's about it. If you are clever, you should be able to mount them. All you really need is about an inch of straight somewhere. If the handguards have allot of curve in the sides (most don't) then you may have trouble but watching this video should help.

I having issues mounting these to my Cycra pro bends any suggestions?

@RottweilerPerformance

3 жыл бұрын

Lot's of people have done this, but your best bet is to email info@rottweilerperformance.com with some pics of what is giving you trouble and our tech people will get you sorted!

do you guys ship to the philippines? wanted these mounts but i dont think its available here locally.

@RottweilerPerformance

3 жыл бұрын

We ship there regularly!

@rtcivic

3 жыл бұрын

@@RottweilerPerformance lovely will order now thank you!

will these work on 2019 BMW S1000R?

@RottweilerPerformance

2 жыл бұрын

These were really designed for KTM handguards, but that being said lots of people have gotten creative with them over the years and we've seen them pop up on lots of different models with success. You just need to be a little creative and most people have found some pretty interesting ways to do it. If you send a pic of your hand guards to info@rottweilerperformance.com and ask the same question our technical staff will give you their best assumption.

Do you guys sell and ship to Brazil?

@RottweilerPerformance

6 жыл бұрын

We do! It may be a little more expensive but we DO NOT add any percentage to the shipping at all and only charge what they charge us. We do send down there though and have many times in the past.

@GabrielLima-uo9oq

6 жыл бұрын

with site do i buy this mounts?

@RottweilerPerformance

6 жыл бұрын

Right here! www.rottweilerperformance.com/quick-flip-mirror-mounts-arrow-kit/

Do you have an install Vid please?

@RottweilerPerformance

3 жыл бұрын

Boom! kzread.info/dash/bejne/mpegq6xyhLG8pNI.html&feature=emb_logo

@ToddtheLoneDroner

2 жыл бұрын

Nice

why are these mirrors so expensive?The give extra horse power ?

@RottweilerPerformance

3 жыл бұрын

Because they are based on the CRG billet mirrors which are probably the nicest in the industry, but not cheap. Technically if you buy the two mirrors alone you get the mounts for free in this kit. Retail on the mirrors alone is about $120 each. But they are nice.

I'd like to see a drop test

@humzilla707

4 жыл бұрын

I dropped my bike on cement with arrow mirror all the way out. It flipped inward and had a couple small scratches, glass was fine. I have them on both motos because they look and work great. I did break one on a 40 mph wheelie on to the bikes left side on really rough road, my foot also.

@howardmontaque8147

4 жыл бұрын

@@humzilla707 Sorry to hear about the foot. Waiting for my new hand guards and its time.

I really wanted to order those mirrors (arrow kit), but not for 229$. I would pay 100$, if you give me 50% off im gonna order?

@RottweilerPerformance

5 жыл бұрын

Considering the mirrors from CRG are about $100 each, we don't think this would bode well to keep the lights on.

Mount only with shipping 100€ gg Holy Shit

@RottweilerPerformance

3 жыл бұрын

It's not us! That's what the carriers are quoting these days. We don't aim to make one penny on shipping, ever, and because of Covid some international shipments have gone through the roof. We just input the weights and measures and they quote it, not us so please don't think we are gouging. We don't play that way.

The price for the mirrors, or just the brackets is absolutely fucking insane. It would take about 30 seconds on a cnc machine to mill these, sounds like the price of a custom job down at a local shop.

@ManAndMachine23

3 жыл бұрын

Ohyea? How much for that CNC Machine and business setup?

will this fit on super duke 1290 ?

@RottweilerPerformance

8 жыл бұрын

This particular kit is made for the stock plastic hand-guards, and some SD guys install these hand-guards on their bikes so if that is the case, then no problem. If you don't have the hand guards, you can just purchase the mirrors and either install them on the bars in the 7/8 portion or get the additional bar end adapters that we have and put them on the ends of the bars. That is a popular place for them.

@tancakar8987

8 жыл бұрын

Thank you i will probably purchase them soon ;)

@michaelj.kastner5165

6 жыл бұрын

I'am going to try, first i need to fit some high quality hand guards to the bike, or maybe just some bar end mounts?. My problem is i use a Koako throttle lock on the right side!