I have had this trimmer since about last May (2014) so over 9 months, and I love it, love it, love it!!! It is the absolute best trimmer I have every had. The blade is just as sharp as the day I bought it and it cuts so straight and without fraying papers on the cut edge. It is very accurate too! The only other thing that I don't think you covered was that not only do you have a 13" cutting surface on one side, you also have up to a 2 1/2" cutting surface on the other side of the blade. Great review for a great product!!!

Thanks Mon went out and bought this trimmer, can't wait to play with it.

@scrappin4myboys

9 жыл бұрын

lol im such an enabler. you'll love it!

great review and glad to see your update from couple years back. I just bought one today, seems so much better than my Cuterpillar.

@scrappin4myboys

3 жыл бұрын

thx! to this day it is still my go to trimmer and still cuts like a dream. almost 6 years later and still fantastic. thanks for taking the time to watch and comment!

@lindyhawthorne2164

3 жыл бұрын

@@scrappin4myboys great to hear.

Thank you so so much!! I've been contemplating getting this one! So appreciated!! xoxo Jen

@scrappin4myboys

9 жыл бұрын

No problem Jen, hope it helps. If you have any other questions let me know. I can try other things if you think of anything. Love to help u decide especially since its a big purchase.

This is awesome! I have the Fiskars trimmer just one down from that, it still folds in half. I love it. But this makes me want to get this one....lol TFS ~ERICA

@scrappin4myboys

9 жыл бұрын

LOL. Yeah finally took the plunge on a heavy duty trimmer. Needed it lol. I love it its awesome. i keep cutting stuff just to cut lol. TFW!

Awesome. Thanks for the review. hugs,

@scrappin4myboys

9 жыл бұрын

Thanks for watching Yvette!

I have this trimmer and the blade is self sharpening. If you get ragged cuts, just run it back and forth a few times and it gets better.

@scrappin4myboys

5 жыл бұрын

yes it does. Ive had the trimmer for 4 years. still cuts like butter. Dont have issues with any ragged edges myself. tfs your experience.

need it!! want it!!

@scrappin4myboys

9 жыл бұрын

girl im telling you, u need it in your life

Thanks for this review. It has helped me decide to get it. One question, have you tried more than 2 layers of cardstock? Thanks again?

@scrappin4myboys

9 жыл бұрын

Hi there! Yes in the video i only showed cutting 2 sheets of 65lb cardstock it was just two small squares, But yes it cuts just as easily thru 4 layers. I tried 4 layers of 65 lb cardstock when i was cutting with out prior to the review. You also dont have to lift the paper guard each time. paper and chipboard will slide under it easily enough which i did not show. But its a great trimmer so far. :) tfw!

Thanks for the video, Monica. I just found mine. Under the couch in the box no less! DUH. Well I don't have my craft room organized, I am working on that now, so maybe by the end of the yr I will have it done. I know exactly where I want to put this trimmer since it is so big... Thanks again for the review...

@scrappin4myboys

6 жыл бұрын

LOL. Take your time... Finding organization method that works best for you takes time... Better to really think it out then try a bunch that dont work.

TFS this, Monica! I just have one question: how long is the blade said to last? And how easy is it to change it? Oops, that was two. But anyway, thanks a gain for the review!

@scrappin4myboys

9 жыл бұрын

Hey Cheryle! it states you are never supposed to replace it! ive looked and i dont see a place to open the blade carrier. so blade supposed to last forever

Are you able to provide the thickness of the "medium" weight chipboard in mm? I'm looking for an accurate and efficient way of cutting at least 1.5mm chipboard down to squares ranging in size from .5 to 1 inch.

@scrappin4myboys

4 жыл бұрын

I don't have any of this weight chipboard at the moment. I filmed this video 5 years ago. If I recall correctly this was .40pt chipboard so I want to say most likely about between 1-1.5mm

So almost a year later, what's your take on this trimmer? I have the 12" "Scrapbooking Rotary Trimmer" that has been a nightmare since the day I got it. I'm looking for a replacement, but wondering if another Fiskars is the way I want to go. Would love some feedback now that you've had time to get to know this one!

@scrappin4myboys

8 жыл бұрын

Hi Jennifer! I love my trimmer more now than when I first got it. It cuts like an absolute dream. Whether its chipboard, or cardstock or specialty paper it cuts it all like butter. Good luck finding a replacement trimmer. i have nothing but great things to say about this trimmer. Thx for watching ~Monica

Is it still as good? My mom and sister just ordered it for my birthday and I'm super exited :)

@scrappin4myboys

5 жыл бұрын

I still love it. It's practically the only trimmer I use. Blade is still sharp as ever. I cut alot of chipboard and magnetic vent covers on it and still cuts cardstock like butter. The only pain is the 6" mark is not clearly identified but in all reality since I bought it I've only ever needed to cut something 6" wide once lol... I think its worth every penny.. tsmfw!

Hey lovely just wondered if you still use this trimmer now and has it held up? I'm thinking about getting one. Hope your well 🥰

@scrappin4myboys

4 жыл бұрын

Yes I do! Still cuts like butter! I haven't had a single issue.

@DanielleRosePapercrafter

4 жыл бұрын

Brilliant thank you.

If I cut a 8 inch paper, and measure suppose it cuts ABCD rectangle with AC being left side, will distance between A and C will be same as C and D even if I cut large size paper? I always find there is 1/24 or more difference in size and thus not accurate? Can you check this? It can help me with buying decision. Thanks.

@scrappin4myboys

4 жыл бұрын

I have never had an issue with measurement being off. But then again it is not something Im too overly concerned with. The blade is fixed and runs along a metal track unlike many other trimmers who follow a wire for a guideline and can be removed from the track. You will just need to make the decision for yourself in regards to making a purchase decision. The review is not anything associated with the company it was just my thoughts on the product itself from a crafters stand point. Most that I know that have this trimmer love it. With that being said every person is different so just because it works well for me does not mean it will work well for you. Its all personal opinion.

@twocupsstudio

4 жыл бұрын

@@scrappin4myboys ​ I saw some 15+ videos and review is best except one person who raised measurement issue and so doubt was created. I do have chip style blade cutter and replacement blades gets costly and so this one seems good for more than double cost. of what i have and seems worth the investment. I need it for a project which my cutting needs will reoccur once in 3-4 months but for lifetime and in that precise cutting is important as over the years, the same project will grow into a collection and so if there is size difference, it would be noticed. As you mentioned the metal track (and also self sharpening blade) is what makes me feel that I can overcome measurement issue (if any) by working around some method. (Hopefully). Thanks for your reply.

@twocupsstudio

4 жыл бұрын

@@scrappin4myboys Have you used chip style blade trimmer? What is difference in cutting quality? Is there underedge on paper? I find the best cutting by scale and blade used by hand but then it is time consuming and mistakes can be made and hence a need to purchase a trimmer.

@scrappin4myboys

4 жыл бұрын

I no longer use any other trimmers. This large trimmer is the only one I use now.

What do you do about the inches between 5 and 6? That I find baffling...

@scrappin4myboys

3 жыл бұрын

The right side ends at 5.5 and the left starts at 6. the clear edge on both is exactly 1/4" for its easy to find ur measurements. The only thing u would have an issue with is measuring down to 1/8" or 1/16" of an inch, but the rest are fine. I have never had an issue with measuring.

@paulaa.7798

3 жыл бұрын

@@scrappin4myboys yes and I use those often….I make mini albums….so kinda hard to stay away from those measurements

Does it cut chip boards

@scrappin4myboys

4 жыл бұрын

Yes it does, I show cutting several different materials in the video. Light weight and medium weight chipboard.

Does it cuts laminated paper?

@scrappin4myboys

4 жыл бұрын

I would suppose it should. Its a great trimmer. I dont use laminated paper so I can't confirm it for you. I have easily cut several layers of acetate which will be the closest thing to laminated paper I've cut.

@DetailHunter

4 жыл бұрын

@@scrappin4myboys Thank you very much about your answer! 💗

Hi. Are you still happy with your trimmer

@scrappin4myboys

4 жыл бұрын

absolutely, its the only trimmer i use.

@suzydanlen

4 жыл бұрын

Thank you.

@scrappin4myboys

4 жыл бұрын

:)

I just bought one in a thrift store for $5!

@scrappin4myboys

8 ай бұрын

that is awesome!!!

Three years and you never did a review of whether the blade held up.

@scrappin4myboys

5 жыл бұрын

The blade still works just as well as it did when I purchased it, I use it frequently. Still absolutely love this trimmer.