Thank you SO very much for this video, and I really appreciate the fact that you humbly chose not to edit out the error, because we can only learn from it. This was very helpful, and well-done, although I will say that I’m sure your wife wouldn’t have been very happy seeing the bit of that impact drill so close to the leather cushion of the sofa. 😂 Thanks again! 👍🏽

@ProblemSolvedwithEric

Жыл бұрын

Lucky, I didn't damage it! Lol

@skoteitapa

Ай бұрын

What was the model number and make the unit you installed I think it's the same one I was looking at on Wayfair?

Thanks for the great video ! Instructions that came with the fan/light are awful but you cleared it up thanks again.

Your video was extremely helpful to my husband. The directions are awful and incomplete. Install was time consuming, we believe your video saved us additional aggravation and time. Thanks!

This video was really cool and detailed.. This was our first electrical project and glad that we are almost through! Thanks a lot! :)

great video. i loved that you did it wrong the first time (i was wondering) and left it in and discussed the right way of doing it.

Thank you for this video. I just purchased this fan a couple of days ago, and I'm putting it up soon. VERY informative!

Awesome! You were so patient. Thank you for sharing.

Thank you for this video! The instructions I received were not very helpful and you helped lots!!

Excellent video. Thank you 😊

Very HelpFul, Gracias Mi Amigo 🙏🏾

Thank you for the detailed video. I installed a low profile flush mounted fan with remote. I was so exited when i finished cuz it was a pain lol. Well, it is not working so i have to try again, instructions really suck, doesnt say anything about the parts etc. Im gonna try again and take it down and see if i can figure it out. This is my 2nd install, first one was a light fixtureand I totally respect electricity lol. Wish me luck 😅

@ProblemSolvedwithEric

6 ай бұрын

Good luck! You'll get it

@elkequick2668

6 ай бұрын

@@ProblemSolvedwithEric if I do I will post it 😊

@elkequick2668

6 ай бұрын

So, I took it down and discovered that the black wire came off the black wire coming from the ceiling. I attached them back together and TA-TAHHHHHH WE GOT LIFT OFF 🤣. Fan and Light is perfectly working 💪. Thank you again, have a great day 😊

Great, video. Thank you so much!

Great video! Thank you and I’m feeling empowered to install myself.

I haven’t put my golf balls (😛) on yet, but I’m going to tie the pin ends together if they are long enough. They have the tensile strength of melting butter.

Nice work eric

@ProblemSolvedwithEric

Жыл бұрын

Thanks 👍

You are doing good job thank-you

Great video!! Thanks

Did you control this fan with 1 or two switches or just the remote? I ask because you are right the instructions don’t even talk about switches at all. If you put a dimmer switch on this light with dimmable bulbs would it work?

@ProblemSolvedwithEric

2 жыл бұрын

So the fan can be dimmed from the supplied remote. I'm not sure how it would work if you wired it up to an existing dimmer switch as that would also reduce power to the fan portion. Our wall switch powers the entire unit and then we use the remote to control the light and the fan. I hope that helps

Excellent, thank you. I have one more wire (red) coming out of the ceiling. What do I do?

@ProblemSolvedwithEric

Жыл бұрын

Is it a 3 way switch?

@samixyz4113

Жыл бұрын

Yes, correct

Thanks for sharing your experience. Good video. 👍

I have this chandelier but made by a different company (AONNTOO) it didn’t have a black box it only came with the white box and I put it together and it worked then the white receiver wire in the white box shorted out and it never came back on. Do you have any suggestions?

Thank you soooo much. I wouldn't have gotten through it without your help. The instructions that come with the fan light suuuuuuck. You're a lifesaver 😘. Any chance you figured out if the blades can reverse? The instructions (cough) indicate there's a reverse function, but I'm unable to find a switch for it. Thanks again!

@ProblemSolvedwithEric

Жыл бұрын

I believe the reverse function for ours is on the remote, but I'll have to double-check and let you know when I get a chance

@MototasticAdventures

Жыл бұрын

@@ProblemSolvedwithEric Hmmmm. Gotcha. My remote has no reverse option. Appreciate the response.

@blgillespie1

Жыл бұрын

This fan system cannot be reversed. The blades must rotate in one direction for them to move to their outer positions. Spinning in the opposite direction would not allow them to extend.

If I remove the wings to clean but what is the easiest way to put them back on

What is the height of the fandelier from the ceiling?

Can you tell me what I done wrong? I can't turn my fan off when I just want the light on by itself.

Thanks man!

please save me from going crazy here ! you know that green and yellow ground wire connected to the downrod ball? well you connected yuors to a bare copper wire coimg from your ceiling box problem is i don't have any bare copper wire coming out of my box just 2 wires one positive one negative. what do i do ?!?!?!?! do i just not connect the green and yellow wire anywhere??????? plz help trying to install ASAP!!!!! thx.

@ProblemSolvedwithEric

Жыл бұрын

You can ground it by connecting it to any bare metal. Even to the ceiling box itself if it's not painted

Como limpar esse ventilador?

How strong is the fan? Does it make the room really cool? How much cfm? Here in hAwaii is super hot and we need a strong one haha

@ProblemSolvedwithEric

Жыл бұрын

It's pretty strong, manual rates it at 2900cfm at max speed

How u get the fan working alone

Are there instances of the blades shearing off? I had a similar model but smaller two of the blades sheared off after a few months use

@ProblemSolvedwithEric

29 күн бұрын

I've had it now for a long time and it's still going strong

How do you change the blade direction? No manual available. Is it with the remote? If so, how?

@frantziechanate

2 ай бұрын

Press the F/R button

Any idea what to do if the light stops working. I have checked and I can hear the click(relay) when I switch it on, but no lights. I need to open the housing where the wires for the lights are. any idea how to do that ?

@arlenahill1855

4 ай бұрын

Did you ever figure it out, we too have the same problem

@techfeanology6437

Ай бұрын

​@@arlenahill1855 any update on this?

Hi Mine is having a led light turned on even after the light are off , do you face similar issue ?

@ProblemSolvedwithEric

Жыл бұрын

Indicates a wiring issue or potential defective led bar.

@joyceplato499

Жыл бұрын

Similar issues light will not turn off with remote only at wall switch unfortunately then fan won't work..ugh

@ProblemSolvedwithEric

Жыл бұрын

@@joyceplato499 that sounds like a defective led bar. I'd contact the manufacturer for that and get a replacement

Hey so I installed my fan but when I turn the fan on it shakes a little.

@ProblemSolvedwithEric

Жыл бұрын

This generally means it wasn't installed level. That being said, there is a rubber grommet that came with the fan that goes where the half ball is. This should reduce shaking

What do I do if the fan works but not the lights

@ProblemSolvedwithEric

2 жыл бұрын

If the LED light bar is properly seated, then you'll have to check the wiring above the light. Use a multimeter and make sure all your hots are going to hots and neutrals are neutral. Also make sure connections are solid. I've moved away from using wire nuts now and have been using these amzn.to/3nOzyed

Hi does it wobble at high speed?

@ProblemSolvedwithEric

2 жыл бұрын

No, it doesn't. It's self balancing and has a rubber grommet so it doesn't make noise if it does wobble.

@terrynash1211

Жыл бұрын

@@ProblemSolvedwithEric are you in new York..

@ProblemSolvedwithEric

Жыл бұрын

@@terrynash1211 I am not

@terrynash1211

Жыл бұрын

@@ProblemSolvedwithEric I just got one yesterday . next week it will be here. Thanks to you I can understand what go with what. Here is a question for you.. I have a old light fan - this will take its place. But my wall switch has the light & a round on off for fan next's to the light switch more side by side each one turn on the one you want on, I know its crazy huh. Now the question is you think I should leave it like that?? Or upgrade it - either way if I keep it as is. Then I won't need the remote control. Only dim the light.

@ProblemSolvedwithEric

Жыл бұрын

@@terrynash1211 completely up to you. I prefer a modern look so if it were me I'd upgrade, but there are benefits to keeping it as is, as well

To bad you can't put most mine up..

Omg, that remote thing won't fit - help

@ProblemSolvedwithEric

2 жыл бұрын

The remote receiver won't fit? It should only go in one way. If you send me a picture on my Instagram I can try to help

@marsperre

2 жыл бұрын

Gave up for today, will try again tomorrow, thanks, will send pic

@tracymcdermott1047

16 күн бұрын

Has anyone had issues with the fan not working? The light works fine. The instruction say something about calibrating but it doesn’t seem to do anything.