Adding reverb to the vocal mix channel??!!??! U need to watch more tutorial better than creating💩tutorial videos😅ur reverb size was at 100%wet😅😅😅😅😅😅damn!!!!😅😅😅😅

@mixwithjerry

16 күн бұрын

Clearly stated “add reverb to a send track”. If you’re going to stroke your own ego in the comment section, at least be factual.

@user-xt5mr4qr4y

13 күн бұрын

U are not the smartest in the room Walid

@TinoRL

8 күн бұрын

@@mixwithjerry GOT HIM WITH THE PIN OF SHAME

@lukadolla

7 күн бұрын

Bro watched the video on mute

@jadengrogan21

6 күн бұрын

Bro u used that emoji way to many times

I feel like I’ve come a long way because finally I understood just about everything you said and explained :)

@Bxbywoo

2 ай бұрын

Factssssssssss

@asesane

Ай бұрын

That’s how I feel lol

de-ess before compression can result in more natural sounding de-ess . IMO sibilance from waves is one of the GOAT de-esser after trials of countless de-essers.

@3FAWTY

Жыл бұрын

i’ve been trying de-essers out and have been having trouble finding a good one, will give this a try

@Orderftw782

Жыл бұрын

Nope . Compressors like 1177 and optical tend to increase sibilance , So it is always good to add a deesser after compression to get a round and clean tone . This is used by all pro mixers like Lesli Brathwaite and Dave pensado.

@Orderftw782

Жыл бұрын

@@3FAWTY U should find a deesser that don't take more than 15 sec of Ur time. The key to choose plugins is efficiency .

@HottestInTheStreetsNetOfficial

Жыл бұрын

​ @Orderftw782 sure have an de-esser after compression could tame the the sibilance from a FET Or Opto. but if we're speaking "dave pensado" it is also him that said "always over de-ess vocals before compression then compensate it after " he was using C1-SC at the time , Also 15 second work flow is ideal but also remember De-esser is essentially an Dynamic EQ & functionalities its an essential especially dealing with vocals. sometimes you'd want to lookahead or sidechain trigger from your vocal mids or lower mids, Alot of major engineer used to separate sibilance in new track to use as triggers. oh Heres a mic drop " The Best De-esser Is manually gain ride The sibilance on the waveform before hits any plugin " (

@HottestInTheStreetsNetOfficial

Жыл бұрын

@@3FAWTY this one is one of the most natural sounding, Pro-DS for taming specific range, Weiss De-Ess for track. Sidenote for vocals dont treat your vocal bottom end before compression could result in harsh vocals.

Also a reminder: If you’re finding yourself EQing a lot on a vocal, then that vocalist needs a new mic. Same goes with samples.

@madsanta7938

Жыл бұрын

True but I would rather have a shit mic in a treated room than the other way

@UnknownUnknown-cd4hh

Жыл бұрын

@@sigmmamusic5547 It depends, what mic are you using? Do you also use it with a pop filter?

@RapperRemedi

Жыл бұрын

The mic needs a new artist 😂

@RapperRemedi

Жыл бұрын

​@@sigmmamusic5547learn about recording if you want to be an artist

@nuh-uhbro765

Жыл бұрын

@@sigmmamusic5547 How come you deleted your other comment and have no music on your channel? 💀 Poser

This is like the most beneficial use of the Shorts format I have ever seen lol thank you 💯

U can use this to get a more professionnal reverb : Decay = 60000/BPM Pre Delay =(60000/BPM)/4 (U can divide by 2 again, just see what fits best 👍🏼)

@iloveeverything4380

11 ай бұрын

I don't get this wdym by 60000/bpm

@unefleurrebelle6295

11 ай бұрын

@@iloveeverything4380 it means you grab 60000 which is an amount of milliseconds in one minute then divide that count by bpm (beats per minute) of your song and takes the result, so you can know how much you have to set a decay and also count a pre-delay using the same formula except, in addition, you will need to divide it by 4. hope I gave you some help 😅

@lawdoryx9172

5 ай бұрын

Can I please get your vocal chain settings from EQ to the last step in your mixing order, I wanna see something. Try to keep the plugins basic please 🙏🏾

what about the 10 soundgoodizers

@mixwithjerry

Жыл бұрын

Nah 😭

@d00mu

11 ай бұрын

@@mixwithjerry how about 10 ott's?

@arkhon_beats

11 ай бұрын

​@@d00muartist dies after listening their vocal performance

@juanlugo9240

10 ай бұрын

Plus 5 more on the side chain, 3 more on the vocals mix bus and 2 on the master

@prod.lanista

10 ай бұрын

​@@juanlugo9240frfr

background beat an vocal flowing in sync, feels a bit like a unique rap song

@Malcolm-xz3ef

10 ай бұрын

He was lowkey spittin 😭

your tips bin changing my game keep them coming 🙏

A dynamic eq makes for the best dresser. Use the preview button to hear only what you are cutting to help find the silence then scan between 5k and 7k for the loudest Tss sounds and reduce by about 3db. Also nothing beats manually adjusting your vocal recording volume peaks before it even gets to a compressor. Allows for a much more natural sounding and upfront vocals. Lastly a harmonic saturator really helps adds 3 dimensionality to the vocals. Cheers

@user-ov9tf7fi1e

6 ай бұрын

Too much work, not worth the result. Better you got a top deesser plugin(s)

@EliHerreraOfficial

3 ай бұрын

@@user-ov9tf7fi1eif you have the money and don’t have time, buying it makes sense

@darkskinwhite

2 ай бұрын

as far as I'm aware, modern de-essers & dynamic EQs set up for de-essing are doing the same thing, no?

Dude is rapping yooo ❤

Your golden Just what I needed, someone I understand New Zealand

Man I didn’t know there was a de esser, this makes my life so much easier thanks a lot!

Love this chain ! Ready to use

Genius 👏🏼 mi Amigo! 🧠 It works wonderfully! Gracias 🙏🏼

I use the RChannel (high boost, low-mid cut, and RVox), MJUC compressor, and the F6(aggressively taiming the low/low mids) just three plugins not including the tuning. It sounds very close to my final product and its low latency

@-zarex-6847

2 күн бұрын

how does that sound, can u maybe send me that someone and teach ne a lil, i tried many things but my vocals are still quite compared to big ones

This was perfect ty!

I love these videos bruh. Thank you!

Thanks you very much for the shortcut

Thank you for this!

Your voice is very very comfy alr dude

this guy likes waves

Reverb on a send 👏🏻

Bruh this really the wayyyyyy!!!!!!!!!!

This VO chain is phenomenal. Can you show us you got that so clean??? This short sounds amazing!

@mixwithjerry

Жыл бұрын

Basically the same vocal chain without the reverb. You can also go heavier on the compression to make it sound more upfront.

Before i learned how to use a compressor i would go through and manually adjust the gain at different points to control the dynamics. Still do it from time to time

People saying the chain sucks but it isn't terrible, it's just standard. I do think the plugins are out of order tho. It's usually best to de-ess before comp cuz de-essers use dynamic changes to find what it should reduce. Putting it on a compressed signal can make it harder for it to work cuz the sibilance peaks have already been slightly smoothed out. Also adding an EQ before comp typically gives you a warmer tone, where adding an EQ after comp usually gives you a clearer tone, so I PERSONALLY would comp before EQ, but it could depend on the song

I do this usually! Remove manually done breath if it's necessary

Don’t forget saturation after compression and before reverb. Every vocal benefits from at least a little saturation to fatten it up🔥🔥

@rudiemc9846

7 ай бұрын

This is what I’m looking up now lol I use Saturn 2 for saturation but I feel it brings out a bit of mud, what’s a good plug in or setting for Saturn 2 if u know?

When this kind of content says "unnecessary frequencies" what do they mean by that or what do this apply to? What are those frequencies reffering to exactly?? Thank you?

And now do that in a Hardware Channel Strip 😅 Good preparation (Dry sounding room, matching Mic to the Singers Voice, solid Monitoring) makes mixing way easier.

vocal saturation is also really important

@ToadyMcgee

7 ай бұрын

What is your favorite method for mixing vocals with saturation?

@alibenakhdim1511

6 ай бұрын

@@ToadyMcgee Saturn by Fabfilter

@LeonardoLichucha99-yw1hw

2 ай бұрын

very important... thank you

@bobbyxsteevbeats

2 ай бұрын

@@ToadyMcgeebb tubes

Your reverb ms time has a formula. 60,000/BPM * 2 = MS of decay. You can then divide or multiply this number by 2 to get perfect timing for a lot of things in the mix that use MS

Bruh this is well explained and totally a fine video, but kinda a wasted opportunity - if you had even a short vocal sample looping so we could hear dry-eq'd-comp'd-de-essed-reverb it would make this video 100x better, and one I would share to some friends who need it!

10 decibel reduction is insane

@MikeyJoeMadeThis

11 ай бұрын

It’s really not

@nunasentus

11 ай бұрын

I was thinking it was a bit much too but it definitely depends on whether he meant this as a tracking or mixing chain ( & to be fair he did say adjust the compression to taste). Also sometimes Fl be boosting those beats like crazy by the time u listen through there master

@MikeyJoeMadeThis

11 ай бұрын

@@nunasentus you can do this sort of compression on vocals without problems

Bro with the peso pluma cut 🧐

🙏🏽🙏🏽

Respect for the dirk shirt

big money 🎉 gang lets grind

I think you're rapping on the beat

Use tight curves to eliminate the nature flaw of the human vocal chords, which also increases clarity and separation

❤❤❤

AND a 1000 dollars microphone. Don't forget that and do mention the one your using

@user-ov9tf7fi1e

6 ай бұрын

More like 1,5-1,6 (if its neumann tlm49)

@user-ov9tf7fi1e

6 ай бұрын

Dont forget the preamp/interface

I like a good mic.

🔥🔥

Top🎉

Let's hear this on the vocal

and results?

Damn you should really take your own advice with the de-esser

@mixwithjerry

20 күн бұрын

If we’re being honest, I think my vocals sound better than the one song you have on your page.

W

the pre delay and the decay time is actually set according to your BPM

@mixwithjerry

11 ай бұрын

Yeah that’s why I stated in the video to experiment with those settings based on the bpm of your song

Reverb is based on tempo

I like to de-ess before compression. Don’t want those esses hitting the compressor too hard.

"R COMP GANG" IN THE BUILDING

@djcook

4 ай бұрын

rvox

Rule no. 1 = Buy expensive microphone 😊

@JamarConley

7 ай бұрын

I used to not think that. I can make about any mic sound as crispy as the 103. But the 103 out of the box is so clean, I don't even know what to do to make it sound better. I just purchased the 103, focusrite isa one, and a lin2a. It's a game changer even though it cost almost 2.8k. I started with nothing and cracked plug ins. Now I have nice stuff and use no cracks. Invest in yourself and your credit. I get gear interest free and can pay for it over-time. I don't make money from music it's more of a hobby. So I can never justify paying for most stuff up front. I have the money 9 out of 10 times. But it's so much affordable overtime. I recommend zzounds for interest free payments.

These youtubers they talk like they're singing in the rythm of the background beat

The proper pre-delay and reverb time are dependent on the tempo of your song. Divide your bpm by 60,000 to convert it to ms and use this number.

@mixwithjerry

11 ай бұрын

That’s why I stated in the video to experiment with this setting based on the tempo of your song.

Let’s hear a before and after

Deesser before compressor

Soon as I saw mixing in FL.......

@HITMAN1er

2 ай бұрын

It doesn't matter it's about your ear.

Isn’t it advisable to go back into the mix if your bumping your track past the nyquist theory of level matching, meaning anything over twice the perceived volume is too much?

Is this a dynamic DeEsser Plugin you use right their? I look for one like that… How expensive was it? I think about the spl 500 deesser plugin but maybe you showed me just what i look for ✌️ thx mate

I know. I've got those snoop dogg s when Im on the mic. Except my s don't sound as cool. lol

Doing a lot of subtractive EQ on vocals is not a good idea - I’d just boost top end and midrange and also compress them much heavier in multiple stages before de-essing

Can a bad bg noise vocal can b mix ... At its limits but sounds professional u know what I meant...

Deess before Comp 👍🏻

@mixwithjerry

8 ай бұрын

That’s fair. With mixing, everyone will have a different way.

I prefer Fabfilter pro-q3

What about making sure vocals are in key

10db gain reduction might be too much for 1 compressor, i stack at least 3 compressors usually. But if it’s sounds good to you, you do you.

What beat is playing in the background?

alright is it only me or did i think you said 10 decibels of depression

First step: have a good source.

You should set your pre delay depending on the bpm of the song

@mixwithjerry

11 ай бұрын

That’s why I said experiment with that setting based on the tempo of your song.

@hhstudiochannel6737

11 ай бұрын

You should not use theory in mixing sometimes . Use your ears .

0:02

What is the name of the EQ you use? I was looking for him (OBS: Amazing video)

@xxx_pplslayerr_xxx1080

11 ай бұрын

F6-Waves

Another bro with the magic chain that will for sure make your mixes worse when you copy it

@mixwithjerry

11 ай бұрын

If you can’t get something sounding good with EQ, compression, a de-esser, and a reverb then you got some work to do. Sorry, but there’s not supposed to be any magic to it.

too basic for 17k likes

@wasifafridi

7 ай бұрын

Pin of shame 😂

@qgp

7 ай бұрын

simplicity is key

@kelvinnana205

7 ай бұрын

It is a shorts.

@jripjrop9893

7 ай бұрын

This comment is too basic for 3 likes 😂

@jasonwarren8055

6 ай бұрын

Bro not everyone knows this chill

10 db reduction? Wow ok. I only do that on a bussed track and blend it back in.

Reverb is for Noobs....all great producers use mostly delay

#1 tip is record a good vocal to begin with

1) Cla Vocals 2) Cla Vocals 3) Cla Vocals 4) Cla Vocals

software name?

10db of compression. That’s kid level compression.

No cla.?

are those plugins free?

What about the hertz 😥💅

Find a preset that you like Set your pre-delay between 25-50ms Sounds hard with background music😅

Better use 2-3 Compressors and then set each to 3db

@usocoldjmott

5 ай бұрын

10db of gain reduction from one compressor is crazy. I've never been able to get that to sound good but I seen a few people on KZread do it

10 db of reduction ? 😢

Yooo what is that first eq he’s using???

@mixwithjerry

7 ай бұрын

F6 EQ

Okay now how to get louder mixes?

@mixwithjerry

11 ай бұрын

Check out the channel

Ratio of compression seems higher than usual. Why not keep the dynamics alive on the track you’re mastering?

@vladimir4200

7 ай бұрын

10 decibels of compression is limiting in my opinion

And the real truth is u need to invest into acusticly well designed room

Result of The vocal ? Lol

@mixwithjerry

10 ай бұрын

There’s a 60 second time limit for KZread shorts. There’s no way I could’ve explained 4 plugins faster than I did and then also play the vocal after.

@emptytombprod

8 ай бұрын

​@@mixwithjerrythat's what normal videos are for.. shorts are great, but more in depth vids are helpful imo.. this was good tho I don't think I could explain my chain in 60 seconds..

So we just not gonna do any additive eq lol

boy, use a de esser on your voiceover

DE ESSER AND COMPRESSOR PLUGIN NAME ??

@mixwithjerry

3 ай бұрын

Sibilance De-esser and Renaissance Compressor by Waves

@Slevenbeat

3 ай бұрын

@@mixwithjerry ok , thnxx man❤️‍🩹

The cpu dying right there

@mixwithjerry

Жыл бұрын

Yeah because that was a big project with a lot of sounds and plugins spread throughout. Had the God Particle and Ozone loaded on the master also.

My F6 EQ plugin doesnt show any waveform when im using him, someone knows how to fix it?

@mixwithjerry

Жыл бұрын

There’s the F6 and the F6 RTA… the RTA has the frequency analyzer

@euurowan

Жыл бұрын

@@mixwithjerry ty 🙏

10 DB of de-essing? Yikes

@mixwithjerry

10 ай бұрын

I think my music sounds good so 10dB is working for me.

@kingkyoga9263

10 ай бұрын

@@mixwithjerry I don’t doubt you….I just find that when I de-Ess over 5db it starts to sound unnatural, dark, & way too far back in the mix to my liking. I would imagine 10-15 DB is probably on a case by case basis & under completely extreme circumstances.