Really nice video. The lesson from this is not only how to route effects but how to actually use them! Less is more!

Thanks for being so clear. Perfect rhythm for me. Got it all.

This video is extremely helpful, and I thank you for it. I am getting to know my way around PT10 and this makes it a whole load easier.

You are a great teacher! I understood you clearly and really feel like i've learned! Thanx

Very Clear and Concise Tutorial! Keep it up! Thank you so much!

This finally helped me understand how to better use effects! Thanks so much.

Great tutorial! Thank you!

This was an amazing tutorial thanks so much. I really learned a lot :)

this is great i remember you from the taxi rally 2011,,,you explain it well.,,,,,brett in LA Ca

It works great and without any problems.

great clear teaching.....thank you so much.....subscribed to you and looking forward to more info.....

Hey helped me a lot, thanks for the great video tutorial!

This was great! I had no idea that you could bus tracks by selecting new track on the sends. Awesome vid!

@jvonnjvonn4688

8 жыл бұрын

right its much better then all that 1-2 bus shit jus new track thats it have you ever try logics tho

@JasmineIVANNAEspy

7 жыл бұрын

Ted Johnson yeah i haave Logic 9

@jvonnjvonn4688

7 жыл бұрын

Younus Saleem i dont know what hes using i use 10hD protools

@jvonnjvonn4688

7 жыл бұрын

Jasmine Espy its good huh

In this case, the Aux track the vocal is being routed to. We did this so we can automate the vocal level before it hit the compression and eq stage to get a more even, balanced signal. Having the audio signal hit the dynamics processors more evenly allows for more creative use of each processors "flavor" it adds to the audio signal path.

Great observation! The VoxLd1 track is playing because of a feature called Solo Safe. If you hold down the Command Key (CNTRL for PC) and click on a Solo button, it puts it into Solo Safe mode. This means that track will not be "soft muted" when you solo another track.

Really helpfull tutorials. Helped a lot

GREAT and so clear

Thaks so much!!!Helpful video!!!Respectus!!!

I dug the way you used the add track function to create and route the aux send/ return automatically. and if you want to feed more than just the original dry track to the fx chain you would feed the the sends section you just select the voxdelay1 or voxreverb1 or both via 2 sends to feed that vocal fx chain. One thing that would help your videos, would be to kill the room mic you are using and take a direct feed from PT, and give the listener a better A-B experience.

OMG THANK U THIS SAVED ME

Hey! Thanks so much for this video!

clear, concise, and a big help. thanks

Thanks for the tutorial

Worked, thx

I understand what you are saying, just keep in mind that the purpose of the video was to show "how to" do these functions in Pro Tools regardless of the material or session being worked on. I was really interested more in showing people how to use signal flow and routing in Pro Tools

awesome tutorial

ground in just 17 minutes, amazing.

it sounds soooo gooodddd

Very helpful..positive vibes

Awesome.. thanks much

Thanks for the clarification on some questions I had ringing around in my head. So how would you set this up also using an EQ, Gate and Compressor? And what about a second compressor like Maxim to really make the vocals stand out in a mix? Thanks!

@calimusic2007 I to put eq and compression plugs directly on the channel as an insert..and to use sends for time-based effects like reverb and delay...maybe to parallel process some distortion...

thank you so much.

It all depends on the situation. If you've just processed an audio file via Audiosuite, you can undo the process. If you have closed the session and can no longer use the undo feature, you can go to the Clips list and drag the original file, before processing, back into the timeline.

thank you

good fucking lesson man i be looking for this type of vid for weeks days

I mean that you take the main out or an other pair of out that you also routed the audio signal of pro tools out to and then loop it back in your interface so that you hear the sound of pro tools directly not through the monitors which are picked up by the microphone you are using. It gives a better sounding tutorial.

Good video, so what was the purpose of the vxld1 mono aux?

It's about context, and you are correct in that it is very "wet". I did not play any of the music tracks for the song and without them the vocal sounds very out of context.

awesome video! Question: what channel would you add compression and eq to for the vocals, on the vocal track itself or the Aux track the vocal output is routed to?

good stuff

good tutorial.. question you cant put two effects on the same new track..

I am trying to use a USB microphone in Pro Tools 12. I am wanting to record vocals. What do I need to do in order to 1.) make this mic work in PT 12, and 2.) hear myself in my headphones while recording? THANK YOU. Also... Once I finally figure this out... I am going to have to use voice effects on my voice. (Auto tune, etc.) using the harmony engine plugin most likely. Will it be possible to hear these effects on my voice WHILE I am recording? Pretty much the reason I switched to pro tools from simple stuff like audacity and Sony.

this really helped me a lot i have my technical exam in 2 days and i ran out of my test version of protools so i hope i can remember this ^^

I use a program called ScreenFlow to capture the screen image

Very informative - valuable knowledge! Now - how does one take that vocal delay and use it on just certain events? Like, if the lyric goes, "I'm just O-Kay!", how do you put that delay (echo) on just the end of O-Kay ("-kay -kay-kay-..._) That's the secret sauce I need the recipe to! I believe it has to do with automation across that effect track. I've tried that with less than great results. Thanks to any and all who can help.

I understand and if i can anybody can. Easy when the professor doesn't include his personal religion in his vocal examples. I don't need a preacher. I need good vocal mix and you nailed it.

independent control of both the audio itself and the seperate effects.. But i most deff know what you are saying.

Hi I just ordered Pro Tools 8 M-Powered. I'm still learning how to use much of the different settings, but I was wondering how to get tighter vocals that are embeded into my track?

hey how is it going? Can you tell me how can I take off an effect that has been processed from Audio Suite at the top and not just from the inserts to the track. Do you get what I'm saying? Im referring to the effects that you have to process from the top of the screen in the Audion Suite Section, Say like I process a Delay but dont want it but cant just go to the edit undo to undo it.

Would you use the same AUX Send Reverb channel for vocal, guitar, bass, etc or should you create separate AUX channels for each one?

@grahamwilson2164

7 жыл бұрын

Barry Simon ....that's entirely up to you but it would suggest.......perhaps a long delay and a short delay....long reverb and short reverb.....but that's just my basic starting point

Hi, What program do you use to capture your screen ?

Who is the vocalist? She is very good

Awsome! I have one problem. In some sessions I can create a new aux track by the NEW TRACK option. In other sessions, when I click on the new track option(aux track in order for the main and then fx from send), it becomes inactive. Therefore I have a "The output could not be made active bec. its mapped output is currently inactive". What is wrong? Do I have to pre set something? I do not remember doing something to the other sessions. Any ideas? Thanks.

When creating your aux track in this video, why does it have to be a stereo trk?

I have protools LE. I don't have the option Track or New Track. What should I do?

I wish I understood all this :(

@jvonnjvonn4688

8 жыл бұрын

word

@ziqceos178

7 жыл бұрын

Nick Weber Same!

@knutnskar6796

6 жыл бұрын

I use Reaper, much simpler. I understand this video, but Reaper is much more user friendly IMO

@jahfilms5763

3 жыл бұрын

Everyday you get better/ keep working

hi, I'm new to this I have windows 7 and interface but it won't record plz help

Isn't that what the 'send window' he referred to is for? Would you not get that window if you send straight from the audio track?

So just one plug in per Auxilary track?

what kinda of mic is that?

Why werent the plug ins mono since its a mono recorded vocal? What would happen if they were all mono?

@youngwurk

7 жыл бұрын

because in mono the lead vocal sits in the middle the fx has to be in stereo if u want to expand the fx to separate it from the vocal .

basically you have control over how much the effect affects it.. (i think that is proper wording) You can tweak the effect itself, rather then tweaking the actual audio with an effect directly linked to it.. Make sense? You are tampering with the effect only.. and not the actual audio.

Hearing the tracks through the camera mic makes it almost impossible to hear the effects.

Too bad the audio is quite unclear.

what you mean?

i spit raw doe

@tonytoker8991

8 жыл бұрын

+Admar Cash no fucks given

Every ti a friend of mine ask to teach them how to use soft soft I share them the link to tNice tutorials YT video tNice tutorials helped so it will help

like legit.. who is this singer??

*grins* I wish people would actually route the main out of the daw to the recording they are doing so that it sounds better and that people can actually hear the real nuences instead of that thin can sound. But good explanation nonetheless.

why are you sending from an aux track? why not just send from the audio track? it seems like a waste of a track to me

Why have you faded those vocals in, it is just empty sound you've faded.... seems pointless!!!!!!!!!

out of context? i thought it sounded amazing dude. maybe im not understanding what your saying.. i think he meant positive things when he said "wet".