Want me to rate your rig? Be sure to tag us on IG @vertexeffects and use the hashtag #pedalboardprescription for free advice, tips, tricks, and improvements to make to your rig in a future episode.

@soloflightwest

2 жыл бұрын

I’d love to send in my Rig for some critique, But I don’t use social media other than YT. Do you receive these in other avenues?

@VertexEffectsInc

2 жыл бұрын

@@soloflightwest maybe email us next time we do this!

@VertexEffectsInc

2 жыл бұрын

@serialfrost it's only an input buffer so you'd have to supplement with other buffers.

@djhinormas959

2 жыл бұрын

i dont have a IG account can i send it to u on FB?

@billytremoloband7456

2 жыл бұрын

@@soloflightwest KZread for the win, all the rest are more like socialist media….! Full of 99% nonsense and 1% nice rig pics etc

This channel is constantly putting out high quality content.

@VertexEffectsInc

2 жыл бұрын

Thanks for watching!

Awesome seeing my mini-pedalboard getting featured in this video!!! Thank you Mason! 😁

@VertexEffectsInc

2 жыл бұрын

Of course!!!

Objection: Not everyone wants to use a Boost for a volume boost during solos. Most metal guitarists are placing them before drives & crunch channels FOR added saturation. Stop saying it rarely sounds good. Same thing with the Tube Screamer and Big Muff. The TS is the one pedal metal guitarists put before everything in the gain stage (save the Boost). They are tightening their low end & boosting their mids before hitting their fuzz & distortion. Just because it does not work you, it does not mean others haven’t made it work for them. I respect your expertise & thank you for all your advise. I’ve tried it your way & it did not work for me.

@VertexEffectsInc

2 жыл бұрын

I'm generalizing based on the broader group that watches this, if you watch our videos on signal path it spells this out more specifically.

Shout out to the Amazon cables! Haha thanks for addressing that I'm guilty myself!

@VertexEffectsInc

2 жыл бұрын

It's a real mixed bag...don't set your watch by them ;)

Thank you for this. Very thorough, and simplified. I’ll probably binge watch everything you have .

My pedalboard is a scratch mat I have stolen from my cat.

Love this format of rig review. Thanks

Excellent and highly informative video! It's great to have you look at, constructively assess and comment on real world DIY pedal boards. Thank you for posting! 🙏🏻👍🏻🤘🏻

@VertexEffectsInc

2 жыл бұрын

Thanks for watching!

Thanks for the advice mason I will definitely go out and get better cables and move around the fuzz pedals and post the update when I’m done.

@VertexEffectsInc

2 жыл бұрын

Great!!!

Excellent idea to critique boards this way. Real practical advice, great professional insights. I learned a great deal from this one video. You filled a niche that has needed to be filled for a long time. Well done.

@VertexEffectsInc

2 жыл бұрын

Glad you enjoyed it!

This is the best channel. Great video, you are the man Mason!

Great segment. Bring it on 😎👍

Dude, thank you so much for your channel and your videos. They're so helpful and well-thought out and detailed. You've helped me so much, I wish I could do more than like and comment.

@VertexEffectsInc

2 жыл бұрын

Glad you like them!

It was very educational and insightful just to follow along and experience a perspective of critiquing a rig not based on what pedals sound like or what overall sound or style a player is going for, but rather how they can be optimized regardless of what gets played on them. Not usually the way I think about my board, I definitely picked up some ideas I will test and likely implement. Thanks for this, keep 'em coming please!

@VertexEffectsInc

2 жыл бұрын

Thanks for watching!

Thank you so much I have learned a lot and I played it to my sound and oh my gosh I could cry! It sounds 100% better!

A great video and great advise!

Thanks for the feedback! This board wouldn't have happened if it weren't for your videos and some help you gave me back in 2019 when I first built this layout (without the HX Stomp at the time). The power supply is the Truetone CS-12 but the HX Stomp is powered by it's original power supply connected to an outlet under the board. I've always operated on the low to high gain staging but don't know where I got that from. I think for some of them it's because I wanted to have the drive colored by the higher gain pedal. I will have to experiment with it! In situations where I was running two amps in stereo or one amp one modeled output, I was getting ground hum which the EBTech solved. But I never checked if it affected the signal. Lately I'm mostly running direct so I probably should pull it out and only use it or one of the solutions you suggested if I really need it.

@VertexEffectsInc

2 жыл бұрын

Thanks for being a part of this journey!!!

Yes the tc electronic hypergravity has a great 1meg 100ohm buffer in it

The ehx soul food has a buffer that you can switch on internally. Great vid!!! Thanks a bunch!

@VertexEffectsInc

2 жыл бұрын

Good to know, thats cool! Great entry pedal to get into the klon world!

Some pretty interesting stuff here. I’ve never heard of anyone putting an overdrive after higher gain pedals, because the way most of the people I know use an overdrive to tighten up the low end and hit the front of their amp harder, but I’d be interested in hearing what it sounds like the other way around. Maybe I’ll throw my SD-1 in my loop one of these days just to see what it does. But all in all this is a really interesting informative video.

@VertexEffectsInc

2 жыл бұрын

Thanks for watching!

Just some foil can solve magnetic field issues. When I was a detective we used it for cellphones to block signals. Couple layers of foil in a pinch does the trick.

Yeah Manson!! Roast our pedalboard that awesome. I wanna send mine! 🙈👊🙏✌️

@VertexEffectsInc

2 жыл бұрын

See description to be featured in a future video!

Nicely done.

Thanks for the rating, Mason! I do use the Spark as an added “gain stage” for the Dude and BD, for some extra thickness. Cables are definitely a priority for me next. Power supply is a Voodoo Labs Pedal Power 2 Plus. 😊

@JeffSaunders

2 жыл бұрын

Also, the Tone Corset is a super underrated analog compressor. I use it for my spanky Cory Wong-style stuff.

@VertexEffectsInc

2 жыл бұрын

For sure! Definitely be aware that it's a linear supply and how it might interact negatively with other pedals with the magnetic leakage.

So so helpful! I've applied a few of your tips on my board and I hear a noticeable improvement. The best part is that I didn't have to buy anything. I just had to rearrange some stuff ;) One question I have is... at what point do you recommend using a looper switcher?

Great episode!

@VertexEffectsInc

2 жыл бұрын

Thanks for watching!

@vertex effects M2! missed you for quite a while Doc (my bad 😔) I’ve added this vid to my pedal board layout playlist (much populated by Vertex vids of course!) Final order from Brad at BTPA has arrived, workshop bench almost done. Holding off on pedal board until all the MkII boards etc are released but layout can begin as can cable assembly. As usual my friend best wishes from Sonoma County

@VertexEffectsInc

2 жыл бұрын

Pedalboard MKIIs have been out for months, FYI

Nice video. I recently found that less is more. Better to have a few pedals that do one or two things well than multiple pedals. Recent board is only 4 pedals and so happy with it. Wanting to acquire more pedals has not made me happier. (Still have all my other pedals boards with 6-9 pedals tho.) :)

@VertexEffectsInc

2 жыл бұрын

Good tip!

Hay Mason - thanks for doing this. The tu-12h tuner on my board isn't in my chain though based on your comment, i will look into the Y cable. Also, i have replaced the delay with a Subdecay Echobox until i add a buffer at the end of the chain. re Road Rage buffer - Input Impedance > Greater than 1M Ohm Output Impedance < Lesser than 100 Ohms 9volt DC Neg Pin

@VertexEffectsInc

2 жыл бұрын

Wonder what the make up is of the buffer, maybe you can inquire if it's IC based or something else...and what IC?

@leeds99

2 жыл бұрын

@@VertexEffectsInc ti072. and as far as I can tell, its not coloring the tone. a Boss TU2 at the end adds a bit of hiss and imparts a harshness, thus, its gone

I'm definitely interested in booking a private tone consulting soon. With the vacuum tube shortage, I have narrowed tube amp purchases to tube amps that I REALLY ACTUALLY want, making more of a focus on pedalboards.

@VertexEffectsInc

2 жыл бұрын

They did a 180 on that tube shortage, I also have a video coming out about this next week to undo some of the alarmist attitudes out there about it.

@dannyllerenatv8635

2 жыл бұрын

@@VertexEffectsInc I’m looking forward to the video!

If you're in Europe, Palmer do some helpful line isolation transformers and a transformer amp split

@VertexEffectsInc

2 жыл бұрын

Yes, they have good stuff too!

I use a Morley Hum Eliminator on my dual piezo/pickup acoustic rig... I haven't noticed any artifacts? The only thing I noticed is it takes the hum out of my signal chain, maybe it works different for other set ups, but I have no complaints.

Big help from you thanks from Morocco to usa.

@VertexEffectsInc

2 жыл бұрын

Wow! Thanks!

@nourdinenourdine4223

2 жыл бұрын

I will send you my pedals order to give me your advices . And you will see some of your advices already in my pedals order

@nourdinenourdine4223

2 жыл бұрын

Can you please give me your good advices

Fantastic info, great video, $ hit background music

the hair is looking dope!!!

@VertexEffectsInc

2 жыл бұрын

Wow! Thanks!

In terms of higher vs lower gain, I use my fx loop to have it both ways. Not really sure about the buffering I'm almost certainly not doing that right. I use a multi effects for whammy and pitch but it sounded horrible before the amp. And useable in the fx loop .The included noise gate works worse now but it sounds better overall and is more useable. I had to get very frustrated before I even bothered trying it lol

@VertexEffectsInc

Жыл бұрын

Watch our video on signal paths and advanced signal paths, it will help.

Just our of curiosity I have a TC Electronic Ditto plus pedal at the end of my signal chain is there a way I can find out what the impedance output reads? Great video! Lots of good information.

@VertexEffectsInc

2 жыл бұрын

It's probably low, but they're true bypass so it's not going to help you unless you're always running a loop.

thank you

@VertexEffectsInc

2 жыл бұрын

You're welcome

Always stunned by how many pedals some folks use.

@VertexEffectsInc

2 жыл бұрын

It's all for the T O N E!

I love your dog. Greetings from Hungary! 😎

@VertexEffectsInc

2 жыл бұрын

Yes! Vizsla!!!

Noise gates!! What about noisegates where do we out these in a chain for 4cm method?

As a buffer, what do you think of the Temple Audio 4X Mod Pro i/o buffer mod (1.1 MO input, 38 Ohm output)?

Hi Mason, great information as always. Some pedals have buffers in them but how do I know which ones have buffers vs those that don't?

@VertexEffectsInc

Жыл бұрын

Unplug power when the pedal is in bypass, if it has a buffer it normally will mute the signal since it requires power.

@BassicBill

Жыл бұрын

@@VertexEffectsInc thanks!!

Mason what do you think of using a Radial J48 Stereo as dual buffer? I habe it as first and last part of my signal chain for recording, and to my understanding a DI box is i.e. a buffer with an XLR out, but I might be totally off track here and your input is much appreciated.

@VertexEffectsInc

2 жыл бұрын

You could use this yes, but having a good output buffer won’t hurt anything in the event you don’t have this or you’re not micing your amp.

Here’s some food for thought as far as overdrive order. As a metal /hard rock player it does make a lot of sense to put a tube screamer / sd1 style overdrive in front of a distortion pedal to tighten up the low end and give it more attack using it as a clean boost in the classic gain at 0 and level at 10 setting. I think that’s why you see a lot of people putting them before distortion or even more neutral sounding overdrives. Of course it sounds pretty bad if you’re actually using it for gain before something that’s already higher gain but I feel most people who are putting it before another drive pedal aren’t really doing that. Just an observation!

@mfdoom808

5 ай бұрын

When playing a strat I really like to use a boost or a clean OD into a distortion. Gives it more oompf and tightens it up

Hi Doctor, if I have a Vol+Wah pedal (Valeton EP1 or Hotone Soul press II). Is it OK placing it after overdrives to really control volume instead of gain? or would it create problems with being after input buffer when switching the pedal to "wah" mode. My current signal path is Guitar >> Buffer >> Comp >> OD >> Vol/wah >> time effects

@VertexEffectsInc

Жыл бұрын

Either first or after you OD pedals...I'd experiment.

I would really like to know what you have against George L cables & ends?

Hey Mason, I’m looking to build a rack mounted pedalboard using a switching system, ( Voodoo Labs GCX). Can you recommend a latching rack shelf?

@VertexEffectsInc

Жыл бұрын

Fix Pedalboards makes great ones.

Hi Mason! I have a quick question. I'm running a Big Sky into my Vox Custom AC30CH. I just discovered the Cab filter on the Big Sky. It says in the manual that it's for running direct. I tried it running through the AC30 and it really cleaned up and clarified the sound of everything running before the Big Sky especially the BE-OD. Is it hurting anything by running the Big Sky with the Cab Filter switch on while running into an Amp? It definitely sounds better with it on to my ear.

@VertexEffectsInc

2 жыл бұрын

I wouldn't run the cab sim unless you're running direct.

Something you said early in the video made me think. (and you may answer what I am about to ask later, apologies if you do. Haven't finished the video yet) - but when a pedal is on, it's buffered (as you know. I am just thinking out loud), and in another video you mentioned there is some flexibility with the output impedance, as opposed to the input. 100 is ideal but the lower the number, the better. So the question is: does the pedal need to "be"/have a dedicated buffer if it's an always on pedal? You pretty much said as much around the 8 minute mark, but I wanted to make sure I didn't misunderstand that. (as long as the output impedance isn't something super high, of course)

@PostColorGear

Жыл бұрын

And a few minutes later, you did pretty much confirm that haha (you mentioned that a pedal could function as a buffer if always on, which of course makes sense) Thanks for all the helpful content you put out!

@VertexEffectsInc

Жыл бұрын

Depends on the pedal and the quality of the buffering. Most suck, really suck - maybe 1% of them might meet an acceptable criteria.

Hey Mason. great and very helpful as always!! where does a Cali76 compressor go in the chain?? i was told at the very end, BUT before the reverb. so, mine is: LolaFUZZ>OCD>TUBESCREAMER>StrymonElCapDELAY>CALI76>Fender63REVERB>DITTOlooper. Is that correct? perhaps you could talk about compressors a bit more in general. thanks!

@VertexEffectsInc

2 жыл бұрын

Good question! After the effects you are compressing everything before it, if you you were to put it first in the chain you would add effects to the compressed guitar signal.

@spectramorphical

2 жыл бұрын

@@VertexEffectsInc so, thats a better signal chain, yes??? BEFORE the effects?? Im using mostly Jazzmaster and tele's into blackface deluxe.

@VertexEffectsInc

2 жыл бұрын

@@spectramorphical well if you think of an 1176 it would never be on a board at all. It's after the mic, sooo...after drives would be more ordinary of how you'd hear it in a studio recording.

Is the MXR DC Brick not an approved power supply?

Hi Mason, what are your thoughts on the Polytune 3 internal buffer? Do you consider it to be a good buffer? I run 8 pedals on my board, with the Polytune 3 being first in the signal chain. All my other pedals claim to be true bypass. Is having the Bonafide buffer at the front of my board enough buffering for this size pedal board?

@TheEchelon

9 ай бұрын

If I recall correctly, the Polytune tuners basically have the bonafide buffer built-in.

Bro, i am using a hx stomp in the fx loop of a tube amp. Will i get better with a analog pedal in the start and end of the chain, cause the buffer? I was thinking using a overdrive and a tuner. One in the start and other in the end of the chain. I am thinking correctly? Recomendations? Thanks in advance.

@QuikdethDeviantart

Жыл бұрын

As far as I know you don’t have this issue with digital devices like the helix etc., so no buffer needed. Same if you use the helix fx loop unless you have an extremely long chain. Essentially you want to avoid signal degradation. Ironically adding your buffered pedals to either side of your helix adds to the number of devices your signal flows through. You probably won’t notice any real difference and you might consider that your also adding more “fail points”… the less extravagant the setup the less likely something goes wrong. Just yesterday I played a gig, and when I went to hit the first note, nothing came out. Rather than troubleshoot during the song I shoved my pedals aside and went straight in to my amp. I was able to get through the set but my point is when things fail, they always fail in front of an audience. If you’ve only got 1 device, it’s easier to diagnose on the fly. I think personally I’m going BACK to my headrush pedalboard for this very reason. Good luck with your setup!

this guy used to be my teacher, dam hey mason

@VertexEffectsInc

2 жыл бұрын

Hey bud! Good to hear from you Brian!

I need help. This is what I’m dealing with. I’m getting a brand new Line 6 m5 with a nice midi controller. So my dirt is RC booster, Timmy, Ts9. What would you guys do with all this stuff. I’m thinking less is more.

@VertexEffectsInc

2 жыл бұрын

Get a little loop switcher for the pedals and control it all via MIDI.

Thanks for the video! In your opinion does every rig need buffers (even if it’s a small 3-4 pedal rig)? If not, how do you determine if you need a buffer in a small rig?

@ivanvranic7860

2 жыл бұрын

If it's the small rig (3 or 4) then you most probably dont need a buffer. Best way to determine if you need is a buffer: 1) play something through the whole pedalboard while all the pedals are off (clean signal) and record that 2) play the same thing straight into an amp and record 3) compare both recods, and if you hear that you are missing some of the high frequencies when going through the pedals - then you need a buffer

@VertexEffectsInc

2 жыл бұрын

Typically the number of pedals don't matter that much. Even if you have 3-4 pedals your guitar still has passive pickups from the most part that have to drive the input cable and a long cable after the pedalboard back to the amp. Those things don't change much no matter what pedals you have. On the pedalboard, for the most part, you're in a low impedance environment relative to what comes before the pedalboard because any pedal "on", true bypass or not, is buffering. So I would say, yes this rule applies irrespective of the size of the pedalboard, even if it's a few pedals.

@jebomey

2 жыл бұрын

@vertex effects do you have a recommendation for an output buffer on a bass rig? Would a TC bonafide do? I know you recommended the Peterson tuner as a bass rig input buffer…

I like to put phaser and univibe between distortions. i have it after distortion and fuzz (ds1, fuzz face etc) but before any overdrive or boost pedals (bd-2, spark boost etc) whenever I like it before overdrive, but with fuzz and high gain distortion, i like to boost the fuzz as well with the overdrive placed after. so it might go fuzz-univibe-drive with all 3 being on. the fuzz set really high gain and the drive set to be really light edge of breakup. I find if i have vibe or phaser after high gain into a completeley clean amp/no drive, it gets this chewy smooth sound which i personally don't like and sounds like nails on chalkboard. the drive after the vibe/phaser adds a nice bit of breakup that gets rid of that alternatively an edge of breakup amp works well too

Are Ibanez WH10 impedance sensitive wahs? Should that come before the Tuner or after? Similarly before or after distortion?

@VertexEffectsInc

2 жыл бұрын

I forget...I'll try to look at a schematic more closely when I get to my computer.

@LukeArmitage

2 жыл бұрын

Thank you!

I’d be interested to see the difference between a soldered cable vs something mechanically coupled like George L or D’Addario. Electrically they should be equal, barring a cold solder joint or a incomplete penetration of the jacket for the ground in the case of the mechanical route.

@VertexEffectsInc

2 жыл бұрын

Electrically, no - not gas tight. Mechanically, also a huge deficit over time. We have several videos that talk about this in depth.

@jacobholmes6201

2 жыл бұрын

differentiating between a gas tight fitting mechanical connection and a proper soldered connection means a cross sectional comparison. And even if it’s not gas tight, tin has about 15% the conductivity of copper, so I’d almost wonder if it balanced out whatever increase in resistance you’d see (I don’t even know if my fluke would show a difference in either) with a non-uniform mechanical connection.

@VertexEffectsInc

2 жыл бұрын

@@jacobholmes6201 if it's not a gas tight connection, or even if soldered starts as a gas tight connection the issue on solderless, in use, becomes corrosion and oxidation, again because the center conductor isn't gas tight and in most cases the shield is just floating and relying on contact with the housing for the ground. Also on a lot of the solid core versions of solderless you'll see the copper deform and then loose it's contact or cold flow. The quality of the solderless stuff in our industry is nowhere near where it is in most others, often cold welding the connections via calibrated crimping tools. Our stuff is so primitive by comparison for guitar cables. For this reason you never see pro rig builders use solderless, it can't be as predicable or bulletproof, and you never see solderless cables with a lifetime warranty either.

@jacobholmes6201

2 жыл бұрын

@@VertexEffectsInc ahhh brilliant. I appreciate your patience in humoring me on this one. Just some stuff I’d never thought about until I saw this vid and got me wondering. Thank you!

What would you use to label guitar pedals?

@VertexEffectsInc

2 жыл бұрын

I use a Brother P Touch

I’m in the Bay Area and I’m curious if you have a gear shop?

@VertexEffectsInc

2 жыл бұрын

We don't, our showroom is in LA actually, I just live in Oakland.

Hi, sorry for the lamer's question :))) : but how do we measure the I/O impedance of a pedal ? @Vertex Effects : is there a video about it already ?

@andywilhelm5831

Жыл бұрын

You can typically find your pedal's impedance online

@slawekiwanek402

Жыл бұрын

@@andywilhelm5831 Thanks Andy, but anyway, I would like to be able to know how to measure it myself :)

Question: I’m thinking abt starting a new pedal board using a TC Electronic Hall of Fame V2 as an output buffer. Should I still be on the lookout for not decking my pedal board with True Bypass pedals? Love the videos, learned so much!!

@VertexEffectsInc

2 жыл бұрын

TC has good buffers, see our video on pedals with great built in buffers!

This is really cool. Is there a way I can send you my setup for one of these episodes that doesn't involve another social media? The only social media i use is youtube and I have an email address. I'd love to hear your opinion on my rig. I think its pretty cool. If I could improve it in any way, it would be amazing!

@VertexEffectsInc

2 жыл бұрын

You can sign up for our newsletter so you get notified next time we do this!

this video is yes

@VertexEffectsInc

2 жыл бұрын

Thanks Jonny!!

Would I need an output buffer if my last pedal in the signal chain is an always on effect.

@VertexEffectsInc

2 жыл бұрын

Depends on how low the output impedance is - we have a video about pedals with great build in buffers if you’re interested.

@jkta97

2 жыл бұрын

@@VertexEffectsInc Thanks! I'm looking at putting the Tim Pierce Overdrive by Rockett Pedals as the last thing in my chain, but I unfortunately wasn't able to find out what the output impedance is. I'll probably just get a TC Electronic Bonafide Buffer to put on the end just to be safe.

Is there something like a video about Pedalboard basics? I have no clue why the impedances affect the sound or what role they play at all. I need some kind of Introduction. Can anyone recommend something?

@RAndrewNeal

2 жыл бұрын

To put it simply, low impedance outputs have enough current available to maintain signal fidelity. High impedance inputs have enough resistance that they draw a negligible amount of current from the source so as not to load the guitar pickups or form audio filters. The reason loading the guitar pickups affects the tone rather than only attenuating is that they're inductive sources (along with the capacitive tone controls), reactive elements. this means that their impedance is different depending on the frequency, and through an input impedance too small, they create a low pass filter that rolls off your highs, making your tone sound dead. It's like rolling back the tone knob and seizing it in place. You always want your input impedance to be at least an order of magnitude greater than the maximum output impedance of your guitar. Usually, inputs have about 1MΩ impedance; more than enough for most guitars to handle. You also want your output impedance to be pretty low so it's robust enough to maintain fidelity over long runs of cable, which has capacitance. An impedance too high here will make a low pass filter in the audible range, having the same affect as having an input impedance too low. In general for audio, you always want high input impedance, and low output impedance. But this is usually the case for audio exclusively. Don't worry about impedance matching. If you want to know about the theory behind audio filters for a better understanding of why impedance matters, do some research on reactance and RC and RL filters.

@VertexEffectsInc

2 жыл бұрын

These videos exist in our library! Have a look!

Is it possible to have too many buffers!? for example a wampler tumnus buffer, friedman buffer and friedman buffer inside wah all on.

So the voodoo lab power supplies can cause noise? I have 2 that are mounted under my pedaltrain. How can I avoid the noise cuz I have noticed it

@VertexEffectsInc

2 жыл бұрын

It can, the Pedal Power 2 is the least problematic because the case is steel, but the other versions of the Pedal Power are aluminum which doesn't offer any shielding for electromagnetic fields.

@MrFirerobb

2 жыл бұрын

@@VertexEffectsInc yeah I have a pedal power 2… I moved it from underneath to on top of the board since I had room…not sure if it matters.

@VertexEffectsInc

2 жыл бұрын

@@MrFirerobb keep it as far away from your pedals as possible.

People keep saying how Boss tuners don't have good buffers and I don't get it. When we are watching rig rundowns or other pedalboard breakdown videos. Almost all of them have a Boss tuner as their first pedal. Only a handful of people follow the holy trinity of tone. Why is this?

@VertexEffectsInc

2 жыл бұрын

Most of the pro players aren't versed in electronics. Boss tuners are a standard, most people use them, but don't really know anything about buffer quality. Nor do most technicians really understand electronics principals, impedance, etc.

@gregrush8237

2 жыл бұрын

@@VertexEffectsIncWhat are your thoughts on a buffer from Radial that's called the Stagebug SB-15.

Will you be doing something like this again?

@VertexEffectsInc

2 жыл бұрын

Yes absolutely

Mason, all my patch cables are Boss. What do you think? Any better option?

@VertexEffectsInc

2 жыл бұрын

I'm sure they're OK if you have a buffered environment with quality low impedance signals feeding them. I use Mogami 2314 and Squareplugs for my stuff, we also sell it through Sweetwater pre-made and on www.therigdr.com in custom lengths.

@yonedelcastillo4491

2 жыл бұрын

@@VertexEffectsInc thanx a lot. You take your time to answer our questions. You are a man dedicated to his passion. Quality is not a minor issue for you. Thanks again.

@VertexEffectsInc

2 жыл бұрын

@@yonedelcastillo4491 thanks again for watching!

Mason, could i send you pedals and board and have you set it up for me? I’m trying to run things stereo with two amps with some strymons and an ab switch to turn off an amp. I’m running an ac30 and my main is a jcm900. I love the OD on my JCM and I’d like it to run on both amps if possible. I had something set up through my effects loop on the jcm to get what i wanted, but i got way too much hum. Tried a mesa AB with phase and ground control and also tried a hum X, but nothing helped. Not sure what I’m doing. There’s just way too many ways to wire things that I’m going crazy.

@phunkyjunkee

Жыл бұрын

Take a look at the Orange Amp Detonator. It is a buffered ABY box that has a control to bring the amps back in phase if necessary. I do not have it but it’s on my list for when I go wet/dry soon.

@phunkyjunkee

Жыл бұрын

Vertex probably makes something that would do the same thing tho. I’m planning on splitting my signal at the end of the chain just before the amp, running one into a 15 watt tube Stage Right cheapie but with a Celestion G12-65, and the other to my 20 watt tube Hughes & Kettner combo which will have all my wet stuff in the effects loop (chorus, phaser, tremolo, delay, and Reverb)

@bryanp8010

Жыл бұрын

@@phunkyjunkee I just picked up a mesa ABY with all the fixin’s. I think I got my problems solved. There’s just no way to have a good signal running my Marshall distortion through my ac30 and using the fx loop. It killed me because my amp sounds friggin amazing so I invested in a jcm 800/900 yep pedal from Venezuela; the PAL800-v3. It won’t be here till mid January but the reviews and video gave me a chubby. Hoping it’s a good replacement. I’ve got a zillion OD pedals but my mod.ed jcm900 is the nicest OD I’ve ever heard

Mason, I'm using an old school Boss PSM-5 power supply. I never thought about the buffers. Does the PSM-5 do the job of buffers? It's very quiet and I have no problems with it.

@VertexEffectsInc

2 жыл бұрын

Thats just a power supply, not really a buffer.

Mason, I’m building a rug for myself and am probably going to pay for that $149.00 rig overview on your site. In doing that, I’m hoping you look at my current pedals, recommend ones I want to replicate a tone I’m after, and help with routing my cables. Are those the things that ARE covered in the hour long session? Please reply if you can. Much appreciated!

@VertexEffectsInc

2 жыл бұрын

We can take the conversation any way you want it. I provide detailed lists of anything you need based on our conversation and email them to you at the end of the call so you have all the links and resources you need to move forward.

@Dogger1230

2 жыл бұрын

@@VertexEffectsInc perfect! I emailed the rig doctor and Jacob replied to me. I’m gonna write some questions down and get that Tone Consultation. I have all five EVH pedals and am then in search of Metallica’s black album Hetfield tone, along with variations of levels of distortion, chorus, delay, etc. Anyways, I’ll be in touch in a couple:few weeks! Thanks!

@isaacandhismusic1153

2 жыл бұрын

Save the $149 for only fans or more pedals and jump on thegearpage for advice instead :)

@VertexEffectsInc

2 жыл бұрын

@@Dogger1230 👍👍👍

Man I really like this new buffer but I don’t like the fact you have to route the cables all the way back to the buffer. I wish it were more like the EHX Silencer where you have route back just one cable if you’re using FX loop but can route straight thru and to the amp after that.

@VertexEffectsInc

10 ай бұрын

Which Buffer are you talking about?

@XxStonedImmaculatexX

10 ай бұрын

@@VertexEffectsInc hey man, I saw the whole video so it’s your buffer here, they’re both the same. I saw your other video where you explained how buffers work which really helped me out since I run a big rig, sometimes with FX loop. There’s no practical way to just have the output be on the end of the board which I am aware of, I just wish we’d be able to just run 1 cable back to the buffer here instead of running a few back is all. I saw the video in my feed here and couldn’t click fast enough to watch it since I was so close to getting two TC Bonafide buffers to use at the beginning of my board and end. I’ll keep thinking about it.

@VertexEffectsInc

10 ай бұрын

@@XxStonedImmaculatexX If you have an amp with an FX Loop you're gonna need three connections to the pedalboard, plus the guitar, no way around that. Not sure what the alternative would be?

@XxStonedImmaculatexX

10 ай бұрын

@@VertexEffectsInc Yea I usually use either the 4 cable method or an EHX silencer is the amp I'm using doesnt have fx loop. The alternative is to use a buffer built like the one you just rolled out here. I'll used PedalPlaygound to mess around with the configuration. I can always add your new buffer pedal manually (size) there as well.

@GlennJimenez

6 ай бұрын

4 cable is cool and all until you realize both loops are buffered and you’re hitting it twice buffer wise

The biggest problem that I see is: pedals placed Too Close together (like a jig-saw-puzzle). It's not practical for a Live-performance? When you are singing and trying to: Hit your Tap-tempo for a Solo, or trying to: bypass or engage a pedal. I prefer: a little extra-space, to accommodate my footprint.

@VertexEffectsInc

2 жыл бұрын

It's something to be aware of!

@glynnpowell7864

2 жыл бұрын

Unless you’re a studio musician that would be ok

Weird how @mickhodes had 2 klon pedals, guess he just really loves klons... maybe they wanted to stack them?

@VertexEffectsInc

2 жыл бұрын

One low gain one high gain?

Hi Mason would like to talk with you about redoing my board after my last tour it's not doing well and need a rebuilt. Please let me know if you could take this job. Whatever info needed i can furnished. Thankyou Jimmy

@VertexEffectsInc

6 ай бұрын

Jimmy, I'm retired! You might want to ask Goodwood Audio, Omilion Audio, or Xact Tone Solutions

@jimmyhumphrey_5975

6 ай бұрын

Thank you for the info. Enjoy your retirement.

where would I put a Talkbox in my signal chain

@VertexEffectsInc

2 жыл бұрын

Typically last

@Animal22021

2 жыл бұрын

@@VertexEffectsInc Also how can I get you to rate my rig if I don't use Instagram

Someone non ironically using a DOD Grunge on their pedalboard? Well I never

pro boards are pricey due to the 5000 miles of cabling used...

You guys need to get your distributors in line. I ordered an AC module from Sweetwater a month ago, and it STILL says "awaiting Items". Cancelled, I built it myself. If I cant get a $24 dollar module, I'm sure not going to order a $400 board....

@VertexEffectsInc

2 жыл бұрын

That was our fault. We'd be waiting on parts for the AC modules for almost three months before they arrived. That's not Sweetwater's fault - that's us and supply chain challenges.

@glynnpowell7864

2 жыл бұрын

Wah, cry somewhere else besides the KZread comment section kid. Take it up with support. It’s called businesses make mistakes sometimes.

@Blaydrnnnr

2 жыл бұрын

@@VertexEffectsInc So the last time you replied telling me you sent them to Sweetwater weeks ago, was just bullshit right? Good business practices.

Hey Mason great video. I would love to get you opinion on my board. Although I don't have IG. I sent you a message on your website.

😂 you can see doc cringing so hard 😖

@VertexEffectsInc

2 жыл бұрын

Lol! Really!?

modest title. you could just write i'm rating your rig.

@kuzeyrfatkzgnkaya7274

2 жыл бұрын

@@schizoid21 nope. he is always like this.

@VertexEffectsInc

2 жыл бұрын

Kuzey, you're right, deleting this video now!

@bobflemming100

2 жыл бұрын

He’s a wee bit full of himself alright.

@VertexEffectsInc

2 жыл бұрын

@@bobflemming100 The first two definitions for "professional" aka "pro" that came up on my Google search were (1) taking part in an activity in order to make money and (2) someone who accepts money in exchange for provided good and/or service. If I get paid to make pedalboards, am I not a professional by that metric? It's not necessarily qualitative - or how skilled I might or might not be. Secondly, I have a team that makes our titles, thumbnails, and edits our videos based on metrics and what's most likely to be viewed, and while I have built pedalboards as a profession, I didn't come up with this title myself. It seems to me like your comment isn't in the spirit of the video nor what it's attempting to do. If you have a suggested title that you think is more appropriate, feel free to be part of the solution :)

@bobflemming100

2 жыл бұрын

@@VertexEffectsInc I’m not surprised you had to google the definition.

"Pro Pedalboard Builder" :D:D:D:D: Humanity matured for destroy. Pls little grey alien PLS!...

@VertexEffectsInc

2 жыл бұрын

Huh?

"oh-hi" is how you pronounce Ojai!?!? Omg i just pronounce it like "oh-jay"

@VertexEffectsInc

2 жыл бұрын

That’s it, it’s the name of a city between Santa Barbara and LA.

boring

@VertexEffectsInc

2 жыл бұрын

We were wondering…now we know. Thanks for setting us straight! Deleting this video now!

@eternalvernal1286

2 жыл бұрын

@@VertexEffectsInc 😂

😅 most of you play in a bedroom or a low level bar.. Like it matters what your "rig" os like 😅😅😅

@hdog0148

11 ай бұрын

How dare these filthy peasants have a hobby if they aren't famous musicians! The nerve!

@cardbored_

9 ай бұрын

You sound miserable

@TheEchelon

9 ай бұрын

What's wrong with trying to improve and learn new things? That's the fundament of almost any hobby, regardless of the level. And it does definitely matter, it matters to the enjoyment of the players that use these rigs, and also the people that watch this video that can also use the information. As cardbored_ said, you sound miserable.

@bencarley6896

8 ай бұрын

tell me you play guitar without telling me you play guitar

@Prettynoise

2 ай бұрын

No big deal where a person plays .

Pedal board building for dummies 😮