PRISM SUPPLY | 4" Mid-Pegs | DIY Install
Автокөліктер мен көлік құралдары
Learn how we install our 4" Mid-Pegs on a '48 generator Panhead. The installation procedure will be the same for our cone option!
4" Mid-Peg Info:
Generator Option:
· Made to fit all generator motors
· Mount directly to your factory floorboard tabs on stock H-D big-twin rigid frames.
· 5/8" diameter solid round bar
· Mild Steel
Cone Option:
· Made to fit Shovelhead or Evo motors with a nose cone
· You may need to purchase our Mid-Peg Tab Set to verify fitment
· 5/8" diameter solid round bar
· Mild Steel
Tools needed:
· Loctite
· 1x 9/16" wrench
· 2x 7/16" wrench
Buy the 4" Mid-Pegs:
prismmotorcycles.com/products...
Buy the Chopper Style Pegs:
prismmotorcycles.com/collecti...
Buy the Mid-Peg Tab Set:
prismmotorcycles.com/products...
Watch our other DIY Tutorials:
• DIY Tutorials
Watch our popular uploads:
Dreamboat - • PRISM SUPPLY | Dreamboat
Jonny Bourgault's '95 Sportster - • PRISM SUPPLY | Jonny B...
First Start In 40 Years - • FIRST START in 40 Year...
Will it Start? - • $1,000 Says We Can Sta...
Road Trip of a Lifetime - • PRISM SUPPLY | Road Tr...
Subscribe to Prism Supply on KZread:
/ @prismsupply
Subscribe to our Newsletter:
manage.kmail-lists.com/subscr...
Shop Prism Supply:
prismmotorcycles.com/
Follow Prism Supply:
Instagram: / prismsupply_
Facebook: / prismsupply
#prismsupply #harleydavidson #motorcycle #DIY #tutorial #howto
Пікірлер: 30
You guys should do even higher Japanese style
Even if red loctited in place, there is nothing in the design which may keep them from rotating around the fastening bolt if they get kicked from either front direction or the rear. They should be designed to embrace the mountig bracket in a proper way to prevent them from swiveling around if any force other than top down is applied on them.
Those peg mounts and pegs are boss. It's great to see someone manufacturing the old, pebbled Anderson foot pegs. I wish someone would start making some replica gator boots that fit K models and early Sportsters. Even better, make them out of material that doesn't weather check and crack over time. The original style gator boots which are currently available are foreign-made scrap. Thanks.
what if i have a cone shovel with the primary case ?
Do you guys make these for older right side shift ironheads?
@ellishemenway59
Ай бұрын
Damn just said the same thing. They ought to
I’m running an old set of Amens kinda like what you make(very nice btw) but I threw a mousetrap on the pan and shifting sucks, do you have any ideas or anything fabbed for a shifter
Make a set for k models and early xlchs
Is there anything available if someone wanted the pegs to be level with the top of the cases?
Got an BT evo 4 speed in a paughco rigid frame. It’s already got floorboard mounts. Can I run the cone shovel set? Its got a 1 3/4 open belt as well.
49 Like из России)
What controls are you useing with this set up?
Do you guys make these for sportsters yet?
@PrismSupply
5 күн бұрын
We make a Sportster Mid Control Kit that we sell on our website.
Stupid question guys, would this fit on a 2010 iron 883?
@PrismSupply
2 жыл бұрын
No, these are made to mount directly to factory floorboard tabs on stock H-D big-twin rigid frames.
@gummitarzan8545
2 жыл бұрын
Not a stupid question, but a really stupid bike XD
💦 P r o m o s m.
how to build your own custom bike, without building anything on it XDXD
Has this kid ever changed his outfit?!
Never, never, never use red Loctite on a bike. Even manufacturers have started dismissing it. There is absolutely nothing on a bike that requires anything more than the blue. Red is overkill times a 100.
@the_Wingading
2 жыл бұрын
My factory service manual on my 2013 Blackline said to use red loctite in a few places... A small amount of red is better than globing blue on IMO.
@2ndborn186
2 жыл бұрын
@@the_Wingading You don't glob on the blue. Do you torque to specs?? If, so then there is no need for a loctite. If you just gotta, use a little blue.
@the_Wingading
2 жыл бұрын
@@2ndborn186 have you ever ridden an old Harley? You NEED loctite on things lol
@hanskonrad5850
Жыл бұрын
Not sure what bikes your referring to but my shovel bodes well with red . Torque specs are for cases, cylinders and heads . Everything else on a frame mount shovel will rattle loose. Primitive is as primitive does ..keep the American iron on the roads boys !!
@2ndborn186
Жыл бұрын
@@hanskonrad5850 Referring to ALL motorcycles. Blue will do fine enough to keep things on.