Good stuff my man!

@ItsMeaDMaDe

Жыл бұрын

Thanks man!

Hello meadmade, I heard that if you don’t shake your resin before use it will cause prints to explode because some parts of the model will not cure is that true or the only reason we shake resin is because of the print quality?

Where do u get your resin printer settings? How do get your prints to come out perfect

@ItsMeaDMaDe

Жыл бұрын

Just settings I tweak over time. Some of it is from the manufacturer of the resin. Most resin makers will give you recommended settings for your printer and resin.

What is your normal wall thickness?

what if i did add holes.. giant ones... multiple.. and I washed it firmly.. and dried it with a hair dryer before hardening.. and it still exploded? i got myself with half a kilo of destroyed terrain. it happened after more than 24 hours. i managed to cure and paint them already. and they cracked in 2-4 pieces. like the interior of the print expanded.

@3sgamestudio

Жыл бұрын

Well... what helped is 1) lesen down the infill.. down to 12-15% max. 2) over expose the shit out of my print in curing. like curing for 1 hour. 3) I print in transparent only now, o when curing I can cure even trapped pockets of resin somewhere in the print where they shouldn't be.

Literally happened to me last night and scared the shit out of me cuz most of my prints are water washable and hollow

@ItsMeaDMaDe

Жыл бұрын

Yeah it’s not a fun experience.

You can prevent chipping if you put your drill in reverse (counterclockwise) or use a dull drill.

@ItsMeaDMaDe

Жыл бұрын

Great tip. Thanks!

@muto9091

Жыл бұрын

@@ItsMeaDMaDe wasn't my idea, got this info from youtuber "wornout". title "Drilling Holes In Resin 3D Printed Parts". Has worked for me since then :)

Thanx alooot yr really helpful ill surely subscribe to yr patreon .. but u know i have base with 3 holes with wall thick 0.12 its also cracked still dont know how

@ItsMeaDMaDe

Жыл бұрын

Thanks glad it helped. That’s strange we’re you able to wash it really good and cure the inside as well? That could cause it too or possibly you wall thickness is too thin. I typically print a .2mm thickness

@forrestegan

4 ай бұрын

Wall thickness of 0.12 what…Inches, Millimeters, Centimeters? Most measurements in 3D printing are given in mm, so if that’s 0.12mm those are VERY thin walls and I would expect them to break very easily. Around 2mm for smaller prints and 3mm or more for larger prints is typical from what I’ve seen.

The tmnt piece… do you think it would’ve exploded if you didn’t hollow it and left it solid?

@ItsMeaDMaDe

Жыл бұрын

It’s not if you leave it solid. It’s if you hollow it and not put a hole for ventilation and to clean out all of the uncured resin in the hollowed part.

@xmavrekx8663

Жыл бұрын

@@ItsMeaDMaDe so if you had printed it solid, it would’ve been fine? Im just trying to find out if its ok to print solid or not

Also use UVtools

UV LEDs need to be used to cure the resin inside the models through the holes you made.