Hey! Thanks for that. I’ve been needing to upgrade my detailing setup to a gas pressure washer and foaming downstream injector setup. Because I do mobile for a multitude of blue collar type vehicles (semis, vans , pickups) and my electric setup just isint cutting it for the semis and larger trucks. This explanation of the setup is great! Thanks I really appreciate it phill.

@MirandaDetailing

3 ай бұрын

Glad I could help! 😎👍🏼

Excellent set up Mr Phil.

great setup and video Phil

Excellent advice Phil. Your videos have great Attention to detail & planning well still making the video fun and informative. Keep up the great work sir.

@MirandaDetailing

4 жыл бұрын

Thanks man!

Awesome video thanks!

Nice setup Phil, Im waiting on my skid and pressure washer setup I went with Honda and a cat pump for now I would like to upgrade to a better pump tho.

Keep it up!

Hey Phil! It’s Justin, thanks for the visual explanation now after our conversation last week lol. Thats exactly what I did and just let it run until it finally pulled the water.

@MirandaDetailing

4 жыл бұрын

Hey man. It’s funny that I was getting a lot of questions on this setup right before I planned on dropping the video.

Do you know if there’s any pumps that have enough suction so you don’t have to run a gravity system?

Phil is dropping some knowledge on this video!

@MirandaDetailing

4 жыл бұрын

Thanks man!

Really loved the video! Question: I have a very similar setup to yours but am having a problem with my water not shooting out as pressurized as it should? Do you know how to fix this? I would assume it is a pump issue but idk where to even begin

@MirandaDetailing

2 жыл бұрын

Hi. Thanks. Does it feel like it's stalling or loosing pressure? What's your pump PSI rating? You can use one of these to test the pressure. amzn.to/3mEmqHT

Hi Phil, thank you for sharing with us. Your pressure washer machine (AR pump) is 4000 PSI. Is that high able to damage car’s paint? Have you damage car’s paint? I am thinking to buy electric pressure washer with 3800 PSI, 2.8 GPM or should I buy lower than 2800psi to be safe? Thank you again!!

@MirandaDetailing

4 жыл бұрын

Hi. It’s rated up to 4000psi but like I mentioned with this engine being smaller it only reaches up to 2100 psi. So that’s totally safe. You really don’t need anything higher than that.

@MirandaDetailing. Hi Phil, I love the idea of having an all electric pressure washing setup with the battery cell. Do you have any specific products such as the battery cell that you were thinking of using. I am very interested. Keep up the great content!

@MirandaDetailing

4 жыл бұрын

I’m not sure yet. I use to do some research.

Yep, electric are good and some newer solar panels might suffice to power them too!

@King_drew

3 жыл бұрын

A solar panel creates efficiency and effectiveness on the job.

Mr. Miranda, Thank you for your awesome videos. Been following for a while now. Like the recirculating of the water. So did you have to drill a hole through your tank to fit the hose. So from the unloader you got a hose running back to your tank correct? Im going to try this because, I too find myself turning on and off the pressure washer to avoid over heating and damaging my pump. Keep up the good work and God bless. J. Cruz

@MirandaDetailing

4 жыл бұрын

Hi. Thanks sir! Yes I had to drill a 1/2 hole on the top of the tank. And the unloaded pushes the water back into the tank.

@juliocruzer7

4 жыл бұрын

Thank you.😎👍

Hey Miranda awesome videos you create and advice you give... if I’m starting to get into paint correction what entry level machine you recommend? Also what type of polish and compound you would get or an all in one or just start in a one step again thanks a lot for the great content!

@briandraper7630

4 жыл бұрын

Sonax perfect finish is the best 1 step polish with good cut up to 2000 grit scratches. As for polisher, I just have a torq dual action random orbital polisher

@MirandaDetailing

4 жыл бұрын

I love the Meguiars M110 and M210. So easy to use and affordable. Also 3D One and Speed are great for one steps. Lake country pads are also very affordable and amazing pads. As far as polishers. I live my Rupes 15mm. But the Maxshine M8S is very powerful and perfect for beginners plus it’s around $100.

@briandraper7630

4 жыл бұрын

Miranda Detailing speaking of rupes, I just ordered their yellow medium wool pads. Heard they are awesome for cutting and finishing with a 1 step polish.

Hey i have the ar viper pump and 26 gallon sprayer tank which i plan to set up like yours with tank close to the pressure washer. My question is will gravity feeding work with my small tank? Plus do i have to get bigger fitting that the standard 3/4 garden hose size?

@MirandaDetailing

3 жыл бұрын

Hi. I think that should work, As long as the tank is raised enough above the inlet of the pressure washer it should be fine. The standard 3/4 hose should work fine also. as long as the water is flowing from the tank freely it should work.

@mistertimer3267

3 жыл бұрын

Thanks really appreciate your answers.

Both of the pumps that you linked from Amazon have a description of a 1” shaft but you mention the use of a 3/4” shaft on your engine.

@MirandaDetailing

3 жыл бұрын

Hi. Oh that’s weird. I may have misspoken. I would double check your engine first and match it up to the pump.

Just wondering my brother, if you happen to run filters on the water tank for the water or do you run deiyonized water with it? I know in some areas you can pull up and get pure water for your tanks.

@MirandaDetailing

4 жыл бұрын

Nope o don’t even filter it anymore since our water is pretty good. But I used to use just an RV filter and I noticed it made a difference. But we may have to start using a filter again in our new place. It has well water. But it is filtered through a sediment filter.

@majesticdetail3422

4 жыл бұрын

@@MirandaDetailing Our water here in California is hard as hell. I had to go thru extreme measures to make sure my water is the purest as possible. Glad to see your water isn't as bad as ours. 👍

Phil, I am getting ready to purchase a few things from carsuppliewarehouse, do you have a code I can put in for a discount or anything like that? I could have sworn I saw it in one of your vids... but I cannot find it. BTDUBS this video helped me a ton. Thx

@MirandaDetailing

4 жыл бұрын

Hi! I had discount codes but they expired months ago. Sorry. They switched to a rewards system that gives cash back back to spend in the store now.

Great setup. Could you send a link for the 90s you have. Every elbow I have tried 3/8 f to 3/8m leaks. Thanks

@MirandaDetailing

3 жыл бұрын

Hi. This is what we use amzn.to/3s2JfoR Did you wrap it in Teflon tape before you screwed it in.

@kgkg081200

3 жыл бұрын

Yes. I tried using teflon tape. The company that makes the reel and pigtail cord said for me to try locktite. I will order the elbow and hope for no leakes. Thanks for the reply.

@calebmc3296

3 жыл бұрын

@@kgkg081200 how’s it go?

@kgkg081200

3 жыл бұрын

@@calebmc3296 I tried the elbow and it still leaked. I finally just reversed my reel and didn't have to worry about the reel handle hitting the pressure hose. All works great and has a good flow to it. Thanks for the follow up.

Is there a inline water filter installed on your setup for your water supply?

@MirandaDetailing

3 жыл бұрын

Hi. Nope. Fortunately our water is really good here. Out house came with a whole house filter.

So you have 4gpm pump. Doesn't that kill your water supply. Also will a horbor fright engine work for that pump

@MirandaDetailing

4 жыл бұрын

I thought it would but it doesn't, the flow and pressure depends on the HP of the engine. THis pump is rated at 4000PSI max but the engine also supplies enought power to put out about 2100psi. So the GPM are also lower. I find that it barely uses any water...I haven't run out of water....well maybe a hand full of times ...ever. AS long as the engine is 5HP+, horizental 3/4 shaft with the standard 4 bolt pattern you should be fine.

@waltergray9182

4 жыл бұрын

@@MirandaDetailing thanks

@verdantacres4460

4 жыл бұрын

@@MirandaDetailing thank you. What did you use to raise your tank?

@r3ktfahdle120

4 жыл бұрын

I have this exact pump (thanks to Miranda Detailing) and I have it on a predator engine so yes it will work

Hello where did you get generator slider bro

@MirandaDetailing

Жыл бұрын

Hi. From Ralda’s Details! He builds them! kzread.info%E2%80%99sDetails

Hi Phil sir I would like to do a new business, how can I purchase like you have the mobile pressure washer? Is that available in canada?

@MirandaDetailing

3 жыл бұрын

Hi. I'd love to help you out, but I'm just not sure what you can get in Canada.

Electric with solar panels and battery Bank all set save on maintenance and fuel also kills the noise of loud generator and or gas pump

@MirandaDetailing

3 жыл бұрын

That would be so cool! But I’ve priced it out and to have the same wattage and amps to run everything I need would be WAY OVER my budget. Like over $5000! It would be cool though!

PSI?

you have links to those elbow fittings

@MirandaDetailing

4 жыл бұрын

Sure do. amzn.to/2A12bQ3

Where did you get the unloaded from ?

@MirandaDetailing

4 жыл бұрын

I got it from a local pressure washer store here in Richmond. But you can find it on amazon also.

Phil, give us a Trim Showdown Update!

@MirandaDetailing

4 жыл бұрын

Hi. It was in the this weekend wash kzread.info/dash/bejne/m2iGwdmAlNTcp7A.html

1 was in elten germany but you must wear a mask could go to the supermarket but not lunchroom i did use high pressure at gas station inside am not allow not a big deal next month i take mask with me if you go with battery battery operated still does t last long perhaps battery with a usb or power socket option there be 2 systems

Where did you get the elbow at?

@MirandaDetailing

3 жыл бұрын

amzn.to/2KYe4vq

Phil good morning I run a part time business could I set this up on my F150 I have a 2017 small bed?

@MirandaDetailing

4 жыл бұрын

I bet you could.

@armandosautodetailingllcak4513

4 жыл бұрын

Thanks I have an awesome day

@r3ktfahdle120

4 жыл бұрын

I have a mobile setup in a small 1991 Toyota pickup I’m sure the f150 can handle it

Where you get the 90 degree elbows ?

@MirandaDetailing

4 жыл бұрын

I get them locally at a pressure washer shop. Or amazon like this amzn.to/3cX47GJ

@Ezeke_

4 жыл бұрын

Miranda Detailing thank you 🙏🏼

MD how many cars do you do on weekly average?

@MirandaDetailing

4 жыл бұрын

Sometimes 2 a day but maybe 6 to 8 cars a week. We only do full details...no basic washing. Much easier and more profitable that way 😎👍🏼

👋👋👋

I have never understood the point of gravity fed. I have a simple $90 pump since day one from Harbor freight and I never have to do any of that priming.I just don’t see any benefit to gravity fed

@MirandaDetailing

4 жыл бұрын

Well it works without having to spend any extra money. I could buy a pump and do it that way. But I don’t need to. So I just skipped a step. Plus once it’s primed I dont bother having to prime it each time. Plus no battery or having to start both the generator and pressure washer. It’s a win win for us. But people can do what ever they want if they like it a certain way.

@r3ktfahdle120

4 жыл бұрын

Sadly my pressure washer pump took a 💩 with gravity feed so I decided to invest in a transfer pump as well.

Hi Phil, thank you for sharing with us. Your pressure washer machine (AR pump) is 4000 PSI. Is that high able to damage car’s paint? Have you damage car’s paint? I am thinking to buy electric pressure washer with 3800 PSI, 2.8 GPM or should I buy lower than 2800psi to be safe? Thank you again!!

@galdinobruno19

3 жыл бұрын

U can lower the pressure by using bigger nozzle tip