To Watch Part 1 Click Here: kzread.info/dash/bejne/qK6tyMOznsScls4.html Hope You Enjoy! Subscribe and Click The Bell So You Get Notified Of Future Uploads! :) Please Consider Supporting MSFN To Help Pay For Supplies Needed For Future Video Projects, Even a Small Donation Goes a Long Way! www.paypal.me/MSFN (Paypal Only) goo.gl/1nmBdi (Paypal, Credit/Debit Card) Banggood Website Affiliate Link: goo.gl/p3RBZK (a small commission goes to the MSFN channel for any purchase made using the Banggood website link above, it costs you nothing extra and helps the channel)

I like the tip about using glue to hold the part. Also about making the marks. Very usefull ideas.Nice job. Thanks.

@MakinSumthinFromNuthin

5 жыл бұрын

Thanks, I found those techniques useful on this project

The superglue arbor is the trick Ive been looking for!! Now I can turn my brass flywheels. Thanks for the tip.

@MakinSumthinFromNuthin

6 жыл бұрын

I learned it from Chris over at ClickSpring.....works great! 😊

I like you're style. Thanks for the great vids

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks Stretch!

I really enjoy turning brass, I just wish I had more brass and more brass projects...

@MakinSumthinFromNuthin

6 жыл бұрын

Me 2!! But I do have 2 more of these to make but wont film

Nice work good call on the champher those things are razor sharp

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks, I appreciate ya

Turned out real nice Richard, keep up the good work, and as always great editingSteve Summers

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks Steve, I appreciate ya

nice work!

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks!

Awesome!

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks! Fun project!

Nice work, it'd be nice to see the finished product in action.

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks....I may make one for myself and film it...I always liked those things! :)

great job sir

@MakinSumthinFromNuthin

6 жыл бұрын

You can just call me Rich :) Thanks!

@BillyTpower

6 жыл бұрын

Lol It's my thing, I call everybody sir... well unless you hate the NE Patriots...lol

4:10 Nice rings! 4:36 Hah! they were too much for you :D You did an excellent job not leaving a scratch on it! 8:10 I'd want that bracelet if it wouldn't cut me up. No advice for you from this video, everything done perfectly professionally! So a Glue arbor is what you used to remount it, smart...

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks, two more to go!

Rich, Great looking part. Great video. Can't wait to try my hand at stuff like this!!!

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks Joe, I have 2 more to make. They will go muchhhh faster since I wont be filming them!

@MyHeap

6 жыл бұрын

Oh, Gary took the housing and shaft. Said that he would put it on the milling machine and bore the old bushing out and make a new one. Also cut the oil grooves. He also took the fork and spider and said he would see what he could do to take the slop out of that too. I am overwhelmed at the level of help and advice, you, Gary, and others have provided me on this journey. Thanks again buddy. Joe

@MakinSumthinFromNuthin

6 жыл бұрын

Thats awesome Joe!, just the kind of scenario I hoped would come together for you. Being so thin...boring it out was the way to go!

@MakinSumthinFromNuthin

6 жыл бұрын

I am filming your parts being made Joe, figured may as well make a video out of it. Challenging making a square headed bolt on a lathe...but it can be done. I have the bolt all completed except for the square head. Gonna knock it out in the morning and get them off to you 👍🏼

@MyHeap

6 жыл бұрын

Sweet, that was quick buddy. I can't wait to see the video. I will be posting a video for a new series in about an hour. Used you in vain, hehehe, hope you don't mind! Thank you Rich. I really appreciate all the help. Joe

I really enjoy your machining videos. Maybe someday I'll learn to keep my builds neat and clean. ........ nah I'm kidding. Lol I do like you're style tho.

@MakinSumthinFromNuthin

6 жыл бұрын

Thanks Rodman, I try to make them good and at least watchable. I am not the worlds greatest narrator 😂 :)

@rodneysrepurposingrecyclin3821

6 жыл бұрын

Makin Sumthin From Nuthin lol, I ramble on an on. Often times I'm all over the place with what I am saying. Your narrator skills are beyond mine lol.

Love your videos. Thanks for taking the time to post. I was just wondering, wouldn't true precision demand the use of a micrometer rather than the calipers?

@MakinSumthinFromNuthin

6 жыл бұрын

+\- .005 was indicated and the Brown & Sharp Calipers are more than accurate for that

awesome. Clickspring inspired you much?

@MakinSumthinFromNuthin

6 жыл бұрын

A job for a customer, but Clickspring helped with some fixturing ideas....I thanked him in the video description! :) Thanks for Watching!

In round numbers, How much did you charge to make the part including material?

For sure on your choice of tooling. HS can be made far sharper than carbide any day. I used to turn a lot of Inconel (Over 4 ft) and found only HS and Rapid Tap could do the job on the rubber like metal. May I use the Crazy Glue idea ? I have done similar with wood using a pc. of paper between the pieces. but never thought of doing that.Sweet job bud. We do all have the BAE standard eh. "Break All Edges" Lessens the blood flow later on, LOL, LOL ! Thanks again,I'll be back there fella !

@MakinSumthinFromNuthin

6 жыл бұрын

HSS works great on brass. The superglue arbor isnt my invention. I learned it from Chris at ClickSpring. I gave him props in the video description :)

@TomokosEnterprize

6 жыл бұрын

Such a great idea. Necessity and invention eh !

@MakinSumthinFromNuthin

6 жыл бұрын

Go check out his vids....awesome lathework on a clockmakers lathe

@TomokosEnterprize

6 жыл бұрын

Done. I do so much on a sm 8 in.x24 in. old beater( i still need to show you) I wonder if Ford started with this one in his garage. My friend never did have the threading gears for. It spends most of it's life now turning starter and alternator armatures and rotors until I get there. It is amazing what it can produce.

@MakinSumthinFromNuthin

6 жыл бұрын

Its the operators skill level. You obviously have skills!

This is great! I want one! Do you make them to sell?

@MakinSumthinFromNuthin

4 жыл бұрын

No Sir, but I am glad you enjoyed the video

hi "makinsumthin" I like your style; would u be able to make me a 1foot in diameter flywheel? weight between 45 to 50 pound (lbs). I can send you the drawing if u r interested. Thnks

I am kind of surprised you are using a "Very-near" for this. Although I trust a dial far more than a digital anyday as long as the rack is kept clean as clean can be. Mine is a Mit. and over 40 yrs old and never lies to me.

@MakinSumthinFromNuthin

6 жыл бұрын

A micrometer was scratching the surface.....difficult not to mar up or scratch the brass

@TomokosEnterprize

6 жыл бұрын

Got ya. Shrink tube and adjust bud. Works every time. Just make sure to use the glue lined. Works on the caliper too.

@MakinSumthinFromNuthin

6 жыл бұрын

If you look at brass it scratches 👀 LOL

@TomokosEnterprize

6 жыл бұрын

For sure the shrink tube thing works great. Ya just need to check it a lot bud.

@dimitar4y

6 жыл бұрын

so, like my tape idea. xD