Without any felt tape I used velcro tape (the soft 'loop' side) on the inside of both the front and back shell for the shoulder buttons. Works perfectly, no rattle

@JoeBleeps

7 ай бұрын

Ah that's good to hear! Feels so much better with the rattle eliminated

Incredible video. This was on my short list of like four videos I use to set up my RGB 30. I went with felt on the buttons themselves instead of inside the case. It only required one layer for me and now the buttons are nice and tight. No play on the z-axis. Thanks for the incredible video and guide. Everything else about this device already felt premium to me so now the whole thing is just a dream.

@JoeBleeps

5 ай бұрын

That's good! Glad you got it set up right

@anakinfoxe

4 ай бұрын

What are the other three videos for RGB30? 😀

@lemonacle

4 ай бұрын

@@anakinfoxe retrobreeze dpad fix & rumble motor. Joeys retro handhelds setup guide for ark os. Retro game corps starter guide for jelos and some other helpful tips. Retro game corps portmaster on arkos guide is good too. Playing am2r and stardew valley.

Another method to get rid of the shoulder button rattle is to just lightly "lube" the button hinge stems, no felt needed. I just did this in my RGB30 and it works great. I used a very light application of petroleum jelly (vaseline).

@JoeBleeps

8 ай бұрын

Hadn't thought of that! Will bear it in mind and add it to my list of possible workarounds in future!

Nice to see you doing some handheld content mate

@JoeBleeps

8 ай бұрын

Handhelds are always my favourite

Thanks, this is the first detailed disassembly I've seen of this console so far. I'm about to try to modify it for C-to-C charging.

@JoeBleeps

8 ай бұрын

Good luck with that!

What you mention here around 9:30 in the video is exactly what my experience was. The left trigger wasn't pressing down the way it needed to so I took it apart, and re-seating the buttons must've fixed the issue.

@JoeBleeps

8 ай бұрын

Thankfully an easy fix 😅

@patrickmesseder879

8 ай бұрын

I had to physically bend the factory microswitch up a little bit carefully. Awful build quality.

@JoeBleeps

8 ай бұрын

@@patrickmesseder879 that really is bad. Mine was fine for the most part

@benpregent

7 ай бұрын

I'm having a similar issue but in my case it's the micro switch that's defective. When I press the bare switch and hearing it click doesn't always register a a press. Thankfully Powkiddy is sending me another motherboard.

@JoeBleeps

7 ай бұрын

@@benpregent that's a good result! I think this is the side effect of getting so much tech so cheap. There will be lapses in quality control. I'm glad you're getting a replacement board

just received my RGB30 and out of the box the shoulder buttons dont rattle. Maybe they have listened.

@JoeBleeps

6 ай бұрын

That's great to hear. Very happy for you! Also it's a fantastic machine, enjoy!

I used a guitar pick..plectrum..to open mine up 👍🤟👍😎 worked great...start at top..worked around whole system..yup :).

@JoeBleeps

5 ай бұрын

Always a handy tool to have

What worked abselutly and immediatly for me was putting a little bit of vaseline in the holes that hold the buttons. No rattle and feels good.

@JoeBleeps

7 ай бұрын

I've heard this elsewhere too! Glad it worked

Amazing video! Felt to the rescue! Is there a better directional pad to upgrade this system?

@JoeBleeps

8 ай бұрын

Not that I'm aware of at this point. Have you been experiencing problems? I've found the d pad to be pretty good so far

What sort of felt did you use? Is there a specific type or millimeter thickness you used?The only self-adhesive felt I've found is thicker, meant for home improvement and the like.

@JoeBleeps

7 ай бұрын

I just searched for self adhesive felt sheets on Amazon and bought these (affiliate link): amzn.to/3siWpUW

I’m always confused, why do people complain about rattle. I guess i never shake any of my handhelds that hard when im playing games. Rattle tests never make sense to me. But to each his own. Cheers! Nice case!

@JoeBleeps

8 ай бұрын

Haha! I hadn't done a rattle test, in this case it was definitely a noticeable thing, like those four buttons felt really loose to the touch as soon as I first handled the console. I've got countless handhelds and this is the first time I've felt the need to address something like this. It's still a fantastic console

@meiermarc3743

3 ай бұрын

old player like my dad push button but also jump with the pad if play mario for example....then it rattle often. 😂

I noticed you left the protective red film on your speakers in this video. Did you ever go back in and remove them? Don't know why this wasn't done during manufacturing. When I opened mine, only one speaker had the film on it. I sorted that quick and fixed the d-pad with kapton tape, battery issue too. Nice video by the way.

@JoeBleeps

2 ай бұрын

Thank you! To be honest I wasn't sure what that red tape was! As it was inside and I didn't know what it was for, I left well alone.

@clone-2322

2 ай бұрын

What have you done with the battery issue?

@metreilly

2 ай бұрын

@@clone-2322 This is simply a case of disconnecting the battery for 10 minutes and reconnecting again. The calibration of the actual battery percentage to the on screen battery percentage display is corrected. Without that, some devices will display say 50% charge but they may actually be down at 10%. I'm assuming the charge conditioning circuit on the battery pack is getting confused with some voltage leakage or parasitics giving inaccurate charge state. It fixed my problem anyway. Not sure of the route cause and whether it would return but an easy correction in future if needed.

@JoeBleeps

Ай бұрын

@@metreilly excellent information thanks for sharing!

....I Went through 6 rgb30 till I found one that did not fail either before or after the return period ended....

Just got mine in the mail today. The L2 button is completely depressed and doesn't work or activate the micro switch at all. L1 barely functions. Going to pop it open and see what's up. Thanks for the tutorial.

@patrickmesseder879

8 ай бұрын

Update, the factory microswitches were not soldered on correctly. I needed to carefully bend it up. Not sure if my fix will last.

@JoeBleeps

8 ай бұрын

@@patrickmesseder879 I think that might be grounds for returning it for a replacement. How disappointing

@RayLancer

7 ай бұрын

I have the same issue, but with the R2. I'll try contacting the aliexpress seller and see what's up. Otherwise I'll ask for a friend to help me resolder it, hopefully it isn't too difficult. Next time I'll just buy it from Amazon despite the markup.

@JoeBleeps

7 ай бұрын

@@RayLancer it might be worth undoing the screws, reseating the buttons and reassembling to see if that helps first

@RayLancer

7 ай бұрын

@@JoeBleeps That did it. It wasnt installed correctly (the R2 button). But I broke 2 clips trying to open up the RGB30 lol.

Olá tenho um powkiddy x18s, estou com problemas na bateria ela estar demorando muito a carregar e dura umas 2hrs jogando direto, eu estou procurando a bateria 5000mah, encontrei uma e.vi que são 3 pinos. Você já trocou uma bateria de powkiddy x18s?

Hi, I have that powkiddy but since yesterday I only can see the green light on, but the screen is off, I can heard anything, I format the OS- ds and download the kelps back and everything but doesn’t work, do you know what can be?? 😔

@JoeBleeps

7 ай бұрын

Do you think it may be an issue with the screen? Is there any display at all?

@PrensaAcuarioTv

7 ай бұрын

@@JoeBleeps i also thought about it, its probably becuase the TFOS is fine and the TFGames too, i already ask for a change of the console, i hope they accept it, i just bough it. thank you my friend!! nice channel, my name is Elizabeth, from México.

@PG-gs5vb

7 ай бұрын

If you can hear the menu music but the screen is completely blank, try pressing Select+volume up a few times to turn on the backlight. If that doesn't help, try a different card.

@PrensaAcuarioTv

7 ай бұрын

@@PG-gs5vb actually i can’t heard anything. Ok just let me ask, i have a try another card for system or for games….or both?

@PG-gs5vb

7 ай бұрын

​@@PrensaAcuarioTv The game card has no effect on the device not being able to boot. If experimenting with the OS, it would be advisable to remove the game card just to make sure your game library does not get deleted/corrupted.

Do you know how to get sega cd and sega saturn onto the system ? Mine doesnt have them..

@JoeBleeps

5 ай бұрын

I haven't tried but I'm assuming it's just a case of copying files over. Not sure if it will run Saturn though

Can pico 8 games be created/edited on the device - if you hook it with a bluetooth keyboard?

@JoeBleeps

8 ай бұрын

I've not delved that far yet, maybe someone else might care to comment if they know otherwise?

@thomaschipman

8 ай бұрын

yes. lazydevs demonstrates that in their video: kzread.info/dash/bejne/pmiGmcFyl7Tcfqg.html

@goranbenak1201

2 ай бұрын

Yes it can :)

Awesome easy mod! Thanks for sharing! To me the dpad is a bit hard to hit the diagonals. Almost like the center pivot isn't tall enough. The pads on the PCB might be too large and too easy to hit too. Ideally the footprints should look like what's on the GBA dpad PCB I think.

@JoeBleeps

8 ай бұрын

I'll investigate that, haven't had any issues so far but maybe I've not played many games needing diagonal inputs yet. I was thinking of maybe a thin 3d printed layer to go between the ABXY and the shell, perhaps the same for the d pad. These shoulder buttons are so much better now.

R+L are working total ok on this device... the only thing i dont have to upgrade. The cross is horrible special for fight games.

@JoeBleeps

3 ай бұрын

It seems to be different across individual units!

@meiermarc3743

3 ай бұрын

@@JoeBleeps I own the blue version. Played soulblade n had combos on r+l...worked fine no combo problems ( no problem with the click) The cross isnt good @ all...if i compare with ps3 i use for my pc ? ...endtime. ( push down is also often left or right...now play Tetris what happen ? 😉 I think i change the cross self....

@JoeBleeps

3 ай бұрын

@@meiermarc3743 I'll explore that further. I know on one of my 8bitdo controllers I had to put some tape over the contacts to get a more precise d pad input, maybe something similar would help here

@meiermarc3743

3 ай бұрын

@@JoeBleeps you show well in your video and nice if it works....i have old crosses from my gameboy n other stuff...i decided to trim them...probably i found one match. Hmm...with the tape you lift the box...i think the problem is the under side of the cross.( too lil dots on back) I try upgrade the cross cuz i dont like to put tape on boards. ( all ok just my op...use special electric tape u say self n i dont th7nk it causes any problem))

i cant take 2 screw ,how to fix that?

@JoeBleeps

7 ай бұрын

That makes things difficult. I usually try different drivers. Drilling them out can get messy

I'm okay with the rattle on mine but I gotta say, I'm not happy with the heat up my screen has.

@JoeBleeps

6 ай бұрын

I can't say I've noticed any issues with that

Mr Bliss I have become a big fan of yours but I need you to help me with one thing I want to be able to collaborate my analog sticks the aksis how do I access that on the retroarch I don't know exactly how to fix that for my powKiddy RGB 30 as I want to be able to play certain games that I can use an analog especially for Street fighter and fighting games I know you can collaborate square but I just don't know how. Please and thanks. Respectfully. Somoa

@JoeBleeps

8 ай бұрын

You can do this in the emulator settings, I can't remember how to do it just now, I will check later

@user-kd3xq7zo9s

8 ай бұрын

Yes...Russ from Retro Corps..had it on his channel along time ago..but I didn't have any emulator at the time. Please and thanks

Awww damn..i just had mine apart to open it up and fix the battery problem..lol and i didnt fix buttons...damn..oh well..dont feel like opening it again right now..opps..

@JoeBleeps

5 ай бұрын

A job for another day haha

How to screenshot of a gameplay

@JoeBleeps

3 ай бұрын

I don't know how to do that sorry

@socalrcguy1

3 ай бұрын

@@JoeBleeps nevermind i got it already lol

@JoeBleeps

3 ай бұрын

@@socalrcguy1 good!

Can't figure out your accent, where are you from ?

@JoeBleeps

5 ай бұрын

North West England

man why dont they make black pcb's :( always the shitty blue ones

@JoeBleeps

8 ай бұрын

I quite like the blue ones, it's at least a change from the many green ones in the vintage consoles I work with. You're right though black ones always look good