The "Take Five" in the intro was a nice touch, man.

love the Black Sabbath coda ;-)

I love how this thing is coming together.

@timsway

4 жыл бұрын

thank you!!

Ahhhhhh I have an Arbortech AS170 saw. I LOOOOOVE IT. :-)

I am loving the series! I have the mini carver too. I used to do chainsaw carving and power carving. I love that little tool. I picked up some wood from the beach after Hurricane Sandy. I had some reclaimed plywood. I used all of the materials to carve a shelf. The plywood background I used the mini carver and made waves 🌊 out of the plywood. Then I used wood dye and blended the colors together. It can put nice.

@timsway

4 жыл бұрын

sounds cool. Yea, that tool is a blast.

Super cool build. I used to run sound on the gulf coast and I remember a guy had a double bass made from a suitcase. It was his bass for the road!

@timsway

4 жыл бұрын

funny

I'm digging the project. But let's face it, even though its built out of scaps, this is by no means a simple build. You have talent

A lot of what most people would call garbage might enter your shop , but so far as I can tell what comes out couldn't be farther than garbage , nice work as always

@timsway

4 жыл бұрын

thanks Freddie

This is so cool!! I am about 50% through an electric upright with a smaller hollow body (roughly the size of a Hofner Beatle bass) and about 80% through an archtop acoustic bass guitar, built similarly to an upright. Now that I'm watching these videos, I see that I could probably make a full size upright afterall!! (well, 3/4 size anyway) Thanks!!

Such a fantastic build Tim. Excellent video!

Been really digging this bass series Tim, I actually plan on attempting my own bass build inspired by a Rickenbacker 4003 sometime down the road. Emphasis on the “attempting” lol. Great stuff as always, man.

@timsway

4 жыл бұрын

you can do it. set reasonable expectations. your first bass probably won't be better than all the basses made by other companies and people, but you'll enjoy it, love it and learn a ton. Your second will be better than that, and your third...

@MySedimentsExactly

4 жыл бұрын

tim sway As I’m doing all this planning I already know the neck will likely be the biggest challenge (I’m building it neck-through so I can’t just buy a neck), but it’s something I’m definitely up for. Thanks for the advice man, really appreciate it.

@timsway

4 жыл бұрын

@@MySedimentsExactly share pics when it's done!

@MySedimentsExactly

4 жыл бұрын

tim sway Definitely will.

What a great project! I'm really enjoying this build.

I'm really loving this series, especially because you're talking to us during this process, filling in the pieces we're seeing by describing some of the things you're dealing with. I wish you'd do more builds in this style as opposed to the sort of music video style where we watch you build. This is a lot more helpful to me as a builder and experimenter. To not just see what you're doing but your thought processes too.

@timsway

4 жыл бұрын

noted!

@garagedweller7159

4 жыл бұрын

I liked it also.

My favorite instrument. I'm heading over to your other channel to listen to the comparisons.

Love the intricacies of this build. Every step matters and contributes to the outcome. Details details details. 👍👍

@timsway

4 жыл бұрын

every step was a detail to overcome on this!

Great video...your playing some jazz tunes...fantastic..sounds good

Really good job on that bass. Really impressive.

Great work as always!

That looks awesome, great project so far can't wait to see how it turns out :)

Another great video, Tim. Thank you, I'm looking forward to the next installment. (Loved the coda, btw!)

@timsway

4 жыл бұрын

ha! thanks man. next Sunday!

Love the take 5 intro👍👍

Just discovered yer channel, love it! I'm a welder fab by trade,but did carpentry for a few years,trying to get back. Thanks for the awesome video cuz,upright basses aren't affordable...let's make one👍Thanks Bud

Love watching the process and your tips and tricks!

@timsway

4 жыл бұрын

awesome. thanks!

Great video. I am sure this is the first of many Sway DuBasses. Nice tip with drill depth. Mahalo #arbortech for sponsoring. : )

Awesome work Tim, looking forward to part 3! 😃👍🏻👊🏻

@timsway

4 жыл бұрын

thanks. Next Sunday!

Woah! Nice job! I am a bass player at my school but unfortunately, this bass they gave me is very old and I am have to teach myself how to play. We are going to preform in New York City which I’m hyped for! Nice job on the bass, I wish I can make my own!

Amazing work Tim! Looking forward to the part 3

@timsway

4 жыл бұрын

next week!

Wow this is getting better and better. Now waiting the part 3! Cheers!

@timsway

4 жыл бұрын

Next week!

Very cool. It's great to see how it all comes together.

@timsway

4 жыл бұрын

thank you. I'm just happy it worked :)

Wow this was a great video and I can't wait to have time to watch part three. It made me very happy to see you using those cheap harbor freight bar clamps on the top glue up,because that's what I have too,because I am well....cheap. Thanks for the content.

@timsway

4 жыл бұрын

harbor freight is good for a few things, like clamps. Even my wood caul clamps from HF work as well as the expensive ones.

My Dad's best friend is in a band, and two of his bandmates (father and son) make guitars with the deep curved backs using luthier's planes. "How long does that take?" "A real long time" Also, your removable neck reminded me of the comedian who plays a Double Bass as part of his routine. "Bassie get his own airline ticket" Bassie also did impressions from classic movies . . . Psycho . . . Mutiny On The Bounty

@timsway

4 жыл бұрын

I had an electric upright I used to fly with. A BSX Allegro. It came apart and fit in a golf bag case. Flying with the real thing was never in the budget, but when I restored my aluminum bass I made it the same way, just in case I needed to.

Woohoo, looking good. 🤘🏽😎🤘🏽 Come on part 3... 👍🏽 Awesome job, man.

@timsway

4 жыл бұрын

Next week! :) Thank you

this is different...a jazz bassist/master woodworker. You just don't see many o' those. Hats off to you , sir. can't wait for part 3, and I especially want to hear him stretch out.

@timsway

4 жыл бұрын

thanks for the kind words. I am far from a master of either, I just like to try things and am very stubborn :)

@freddymclain

4 жыл бұрын

I believe that you're simply modest, which is endearing. I'm a guitarist living in Corpus Christi, tx., and i'd gladly work a duo gig with you.

The dove tell is a killer idea. Love the head scroll...is that right? well, what ever it is, awesome! Great video!

@timsway

4 жыл бұрын

sounds good to me. thanks!

always good man.. thanks

If you take a pencil and cut it in half lengthwise right through the lead, your point will mark the exact edge that you are following.

@timsway

4 жыл бұрын

yes, I have one for guitar nut setups, but I wanted this to be larger than the profile, hence the trick of flipping the carpenter pencil the wide way.

I have a lot of wood working tools from my dad & this channel makes me want to build stuff!! 6:03 Police Truck!! I’ve covered that song \m/

Nice part 2, looking forward to part 3!

@timsway

4 жыл бұрын

Next Sunday! :)

Great work, Tim. Sabbath at the end!

@timsway

4 жыл бұрын

the first 3 notes of "heavy metal" :)

Great job dude! I love Upright Basses, I play in a rockabilly band here in Spain and that´s my battle instrument. Hugs bro.

@timsway

4 жыл бұрын

awesome! When I was playing for a living, I used to have to bring my bass with me when I went shopping for a car :)

Love the build Tim . I,ve built 4 octave mandolins . I found each one to be more difficult than the last . I seem to have developed a severe case of OCD as each one progressed . I,m too obsessive about every little detail . Things I,m sure no one else can see but bother me . Attempting perfection can really derail the process .

@timsway

4 жыл бұрын

I hear you. It's tough to find the line between "perfection" "diminishing return".

The neck joint in classic double basses didn't got dovetailed. Just a good tennon glued up with hide glue. If the bass falls a dovetail joint would break the neck block and the ribs. The tennon is strong enough, but would break loose, when the bass falls. Have a good build! My compliments on the tones of the basses you build! Koen

@timsway

4 жыл бұрын

True, but modern Englehart necks are made with dovetails. When I restored my aluminum bass, I used an Englehart neck and cut the dovetail off. I simply butt jointed the neck to the block with two bolts. It has held up fine but the bass did fall once and the heel still broke in the same spot as every other Kay! However because of the bolts it was super easy to take off and fix.

@koentjuh1995

4 жыл бұрын

Thats true, what i mentioned would only work with hide glue. not with the bolts. and eub's usually get bolted too. Nice Job!

God bless double bass luthiers. Most Joe Average bass players like your's truly here, don't have the tools nor possess the woodworking training and luthier skills necessary to build our own axes. I appreciate what you do. It's interesting to watch but it's not for everyone to do. Good for you!

@timsway

4 жыл бұрын

I'm a looonnnggg way from calling myself a double bass luthier! Lol thank you.

@bustabass9025

4 жыл бұрын

@@timsway Well, you do a very good job impersonating one...Couldda fooled me! [Laffin'😁]

Dude, you are so inspiring!

@timsway

4 жыл бұрын

thank you! go try stuff - even if you "can't" :)

It was good talking to u at the guitar show. thx for letting me play!

@timsway

4 жыл бұрын

Cheers! Welcome to my channel!

Man ! This is so cool !

@timsway

4 жыл бұрын

thanks!

So amazing

@timsway

4 жыл бұрын

thanks bro!

you are the best!

haven't got a speck of the luthier in me, but enjoying this build. regarding the "line" on the top from the two layers. In hindsight, would you have rather cut the cedar into like 2" strips and flip them on edge and glue it up before carving out the top? That would have eliminated that line?

@timsway

4 жыл бұрын

interesting idea. I did want the top to have as little glue in it as possible for resonance, but that would look cool as heck

this video has all the best B's; Bass, Brubeck, Black Sabbath, Bangle grinders

@timsway

4 жыл бұрын

beautifully baid

Hello man puedes hacer un buen negocio mandando a sudamerica saludos desde chincha Perú excelente

I just love how this thing looks and sounds. I know you used what you have, but would it be"typical" to use such a soft wood on the top? Just curious. Thanks for sharing!

@timsway

4 жыл бұрын

traditionally the tops are made of spruce, a lighter wood. I was trying to be traditional with this choice! lol

Cool

I also make basses l do everything outside old school. I like your video 's

Enjoying👍👍👍👍👍

Finally - someone making a musical intrument without a damn CNC machine!

@timsway

4 жыл бұрын

full disclosure: I use CNCs all the time. It doesn't do anything I can't do and haven't done by hand, it just speeds up the process. I understand the sentiment, by why rip a board with a hand saw when you can use a tablesaw? If it's 1940 and you're a hobbyist having fun, handsaw away! But if you're trying to run a competitive business, you better get a table saw! Same is true for CNCs in 2019.

@retrodad1973

4 жыл бұрын

@@timsway couldn't agree more and think CNC's are a form of futuristic magic which can be incredible but personally I find it more interesting to watch a person create something without the safety-net of a computer and still craft something that is equally magical. I find your videos to be an inspiration and hope I didn't crap too much on CNC since again, I like them, it just wouldn't interest me to watch this instrument come from that method

@timsway

4 жыл бұрын

@@retrodad1973 understood. CNC videos are tough to make interesting. I try to focus on the stuff done by hand.

Arbortech distributes in Australia !

@timsway

4 жыл бұрын

they are based there!

'This neck goes in at 'about' a 76 degree angle...', says Mr. Accuracy. Very disappointed that you didn’t make tuners from vintage clothes pegs and old paint cans!

@timsway

4 жыл бұрын

slow your roll, you haven't seen episode 3 yet :)

I want this bass so baaad

Thanks Tim, watched this 3 times. Question, I'm building a mountain dulcimer bass and I'm trying to use 3/4 proportions. I ordered a nice pair of tuning pins mounted to brass plates. After I ordered I noticed it said they were for a 1/2 bass. Does it make a big difference? Think I can get away with 1/2 (mounted to brass plates) tuning screws? I haven't built the head-stock yet.

@timsway

4 жыл бұрын

I don't see why not. Just design. The head to fit them. As long as they can turn the strings they should work fine.

It's about time! Just kidding, great project!

@timsway

4 жыл бұрын

one a week for three week.s you gotta wait! :)

@truckerenoch8824

4 жыл бұрын

@@timsway I guess if I _have_ to, I'll wait.

What's a worth while glue for gluing a upright neck on? Any recommendations

@timsway

4 жыл бұрын

fish glue

Hello, Tim. I am really interested on finding measure information for 1/2 size contra bass. I only need to know the distance between the body and the neck. I am thinking the highest point to the body. I am ready to glue the neck to the body but I do not have information about the distance that must have. If you can help. Thank you.

@timsway

2 жыл бұрын

I honestly don't know. I've never played a 1/2 size. On my 3/4 size the bridges tend to be around 7" tall when set up

That's a project you can really sink your teeth into!

@timsway

4 жыл бұрын

It kept me busy for a while :)

In general, what kinds of wood are you setting aside for your fingerboards/fretboards? I am starting to make my own guitars/ukes, tenors, etc., but not sure what wood to use on a budget for the fingerboard/fretboard. Thanks!

@timsway

4 жыл бұрын

I had scored a bunch of cumaru decking a while back that i use for fingerboards. I've also used other dense woods like maple, white oak and birch

@Jackofallthetrades

4 жыл бұрын

@@timsway Thanks, brother!

17:47 sabbath?

@timsway

4 жыл бұрын

of course!

My eyes and nose started to slightly water when you began carving the cedar. Does this mean I've cut too much cedar?

@timsway

4 жыл бұрын

you are probably allergic to it. I have some woods that do that to me. Cedar smells nasty but it doesn't bug me worse than others.

@Makebuildmodify

4 жыл бұрын

@@timsway Yup, I bet I am. My brother is. But I love the smell, is that weird?

@timsway

4 жыл бұрын

@@Makebuildmodify yes

@Makebuildmodify

4 жыл бұрын

@@timsway Thought so...

What kind of wood did you use for the neck? Pine? Or is it Maple?

@timsway

4 жыл бұрын

ash

@izzysantiago978

4 жыл бұрын

@@timsway wow ash!! I know they are great for solid bodies but never for a neck! This is the first!!!

1930s aluminum?I didnt know that was a thing. Hows it hold up?

@timsway

4 жыл бұрын

A German company made about 1500 of them and the folklore is they stopped making them and even melted some down because of the war. AlCOA of New York also made some and there are violins, mandolins and a few other instruments. Nowadays with modern PAs and mics we can make them sound good, but they do lack compared to wood instruments acoustically

@timsway

4 жыл бұрын

oh, and it's f-cking awesome.

Take 5!!!!!! I play this tune with my band youthsayers.

@timsway

4 жыл бұрын

Brubeck is one of my heroes for his music and social activism through positive example. I had the pleasure of watching him play that song and many others with his two sons on bass and drums on Dave's 80th birthday. It was a night to remember.

@lanimask4314

4 жыл бұрын

tim sway woah! 😮

Was that a DK line on the outro I just detected?

@timsway

4 жыл бұрын

Black Sabbath :)

Do you have neck dimenension?

@timsway

4 жыл бұрын

Basically the same as a kay bass

@salomontorres763

Жыл бұрын

@@timsway did you by chance save the measurements you took from the kay bass to make your neck? I dont have a bass of my own yet and planning to build mine but cannot find detailed neck specs anywhere in the internet. Thought you may have saved yours...

@timsway

Жыл бұрын

@@salomontorres763 I don't have it with me here. When I built my first EUB, before I had one, I went to my local high school with a ruler and some calipers and took a bunch of measurements off a bass. The teacher was cool with it. Nowadays it might be harder to just walk in a school, but you could do the same at a music store...

💯💯💯💯👍👏👏👏👏👏👏 Share 👍

Such am amazing idea for a build!! I'm a maker myself, and just started to post my own maker videos here on KZread, so am hoping to do something similar in the future. If you get a minute, please consider checking out my channel and my new video. Thank you.

In a way, you are a caveman. The cave was the shop for that dude, and lots of tools of our ancestors are found in caves.

@timsway

4 жыл бұрын

haha! good point

4 жыл бұрын

I only work with what is given, just like you :) (words and wood!) I love your work and ethos.