Portsmouth lifeboat station practicing with the dedicated capsize lifeboat in the event of an emergency.
Жүктеу.....
Пікірлер: 21
@Kez_abi4 жыл бұрын
That little happy dance what legends!
@tonihasemanhunt25784 ай бұрын
My biggest fear is the sea/water, total respect to you all , i bet this is a hell of a lot harder in stormy conditions , take care gaurdians of the sea ❤
@rnli
4 ай бұрын
Thank you so much for thinking of us and for your support Toni ❤️
@katherinekinnaird44083 жыл бұрын
That's not easy to do. I learned how to right an overturned canoe. But it was a lake and not out far as you appear to be and all that moving water and wet cloths. Then if the weather is sour you will have your hands full. My hat is off to you guys. God bless you and your family's.
@rnli
3 жыл бұрын
Thank you Katherine - our lifesavers are truly amazing, skilled people, that's for sure!
@Pamudder9 жыл бұрын
Neat! You use the standard self-righting technique used for whitewater rafts. However, I am amazed the outboard is so tolerant of getting water in the cylinders.
@barnabyg6808
6 жыл бұрын
John Kailua agreed!
@blmarg1001
4 жыл бұрын
Super late to this but the outboard is specially designed for it, mariner made it just for the RNLI so they're super sought after
@Pamudder
4 жыл бұрын
@@blmarg1001 It looked as though there was enough water coming out of the spark plug holes when they pulled it over to more than fill up the combustion chambers with the piston at TDC. The only way I can think of to avoid bending the connecting rod or blowing off the cylinder head when the piston hits solid water on the way to TDC would be to design a very fast acting relief valve into the cylinders. Very clever design if you can make it work.
@alee3146
3 жыл бұрын
John, the method of rerighting an inflated raft predates white water raft flip overs. (And Polynesian outrigger canoes have been rerighted since their invention.)
@Pamudder
3 жыл бұрын
@@alee3146 I suspect you are right. I used to be a whitewater raft guide, so that's where I learned the technique.
@fastasfox3 жыл бұрын
What did you do when you used to run two stroke with carbs on?
@alee31463 жыл бұрын
If the seas are squirrelly enough to overturn, flip over and turtle a boat then changing the plugs might not be so calm perhaps. I’d maybe stream a (jury rigged) sea anchor to try to keep the head into the seas while fiddling with the engine.
@OisinHiggins
Жыл бұрын
Deploying the sea anchor is within the RNLI D-class Capsize SOP.
@mstf15742 жыл бұрын
kullandıkları bot markası modeli nedir bilen var mı?
@rnli
2 жыл бұрын
Our fab partner, Helly Hansen 👇 rnli.social/3gVhb44
Пікірлер: 21
That little happy dance what legends!
My biggest fear is the sea/water, total respect to you all , i bet this is a hell of a lot harder in stormy conditions , take care gaurdians of the sea ❤
@rnli
4 ай бұрын
Thank you so much for thinking of us and for your support Toni ❤️
That's not easy to do. I learned how to right an overturned canoe. But it was a lake and not out far as you appear to be and all that moving water and wet cloths. Then if the weather is sour you will have your hands full. My hat is off to you guys. God bless you and your family's.
@rnli
3 жыл бұрын
Thank you Katherine - our lifesavers are truly amazing, skilled people, that's for sure!
Neat! You use the standard self-righting technique used for whitewater rafts. However, I am amazed the outboard is so tolerant of getting water in the cylinders.
@barnabyg6808
6 жыл бұрын
John Kailua agreed!
@blmarg1001
4 жыл бұрын
Super late to this but the outboard is specially designed for it, mariner made it just for the RNLI so they're super sought after
@Pamudder
4 жыл бұрын
@@blmarg1001 It looked as though there was enough water coming out of the spark plug holes when they pulled it over to more than fill up the combustion chambers with the piston at TDC. The only way I can think of to avoid bending the connecting rod or blowing off the cylinder head when the piston hits solid water on the way to TDC would be to design a very fast acting relief valve into the cylinders. Very clever design if you can make it work.
@alee3146
3 жыл бұрын
John, the method of rerighting an inflated raft predates white water raft flip overs. (And Polynesian outrigger canoes have been rerighted since their invention.)
@Pamudder
3 жыл бұрын
@@alee3146 I suspect you are right. I used to be a whitewater raft guide, so that's where I learned the technique.
What did you do when you used to run two stroke with carbs on?
If the seas are squirrelly enough to overturn, flip over and turtle a boat then changing the plugs might not be so calm perhaps. I’d maybe stream a (jury rigged) sea anchor to try to keep the head into the seas while fiddling with the engine.
@OisinHiggins
Жыл бұрын
Deploying the sea anchor is within the RNLI D-class Capsize SOP.
kullandıkları bot markası modeli nedir bilen var mı?
@rnli
2 жыл бұрын
Our fab partner, Helly Hansen 👇 rnli.social/3gVhb44
USE MFP ETEC...