Thanks Paul as always helpful and concise

@BoatingWithBoogaboo

2 жыл бұрын

Thanks. Glad you found it informative.

I installed the same gasket and screen kit in my 2001 260 Sundancer. I made a point of placing the gasket joint at the top of the opening to avoid water seeping when it sits at the porthole bottom. I also suggest lubricating the screen seal with soapy water, a film of petroleum jelly or silicone grease. That makes the screen install a breeze!

@BoatingWithBoogaboo

2 жыл бұрын

I think I'm gonna take you up on that suggestion for the remaining four screens that I've yet to install 👍 Thanks.

@rickbyrne9597

2 жыл бұрын

@@BoatingWithBoogaboo You're welcome. I really enjoy you videos. You remind me of my brother in law, "Anal Al". I've picked a few tips and used them on our boat. Thank You!

@kirkvanslooten5917

2 жыл бұрын

Rick I have 2002 Sea Ray 260 Sundancer. Where did you buy your gaskets & screens? Do you know the part number?

@johnhannah9290

Жыл бұрын

HI RICK WHERE CAN I FIND THOSE GASKETS FOR MY 96 SEA RAY 300 SUNDANCER

Well sir, this will be job #1 on our 380. The previous owner decided to just get some folded cardboard to wedge between the latch and window to create a tighter seal... tisk tisk. No 'Hoo Ha' for that.... all will be replaced! Then a mighty "Hoo Ha" with a crack of a cold beer to celebrate.

@BoatingWithBoogaboo

Жыл бұрын

This boat came with the same 'cardboard will hold it' type repairs when we bought here. Happily, the repairs on all SIX of the port light windows worked perfectly, only requiring a small adjustment on one or two by the end of the season. That was due to the foam gaskets seating themselves over a few months, so be aware that you you'll probably have to do the same after the first season of use. . .

@Gears24

Жыл бұрын

@@BoatingWithBoogaboo Duly noted , I'll make sure keep a keen eye on it after the initial compression sets in. Thanks man! 👍

Hi, congrats on this new family member… Exactly the project I need done to my boat 🛥… 👍🏼🙏 it sure helps… it was hard to find the gaskets but, although more expensive, Marine Max had the four I needed… enjoy your new adventures looking forward to sharing your experiences 👍🏼😎

@BoatingWithBoogaboo

2 жыл бұрын

Nice! And you probably got a lot better service from them when ordering 😉

Love your videos. New boater here with a 2005 Sea Ray. Is it possible to get the manufacturer of these gaskets or where to source them? Thank you

@BoatingWithBoogaboo

2 жыл бұрын

Read the other comments and replies.

I got my gasket kits at mmimarine. How were your screens once you got them in their groves? Mine were wavy.

@BoatingWithBoogaboo

2 жыл бұрын

Screens were a b***h to get in, but look fine.

Ditto on OEM manufacturer. I called a couple years ago and they were just straight up rude.

@BoatingWithBoogaboo

2 жыл бұрын

Same experience for me. I regret spending money with them and highly recommend folks look for thier products elsewhere.

@spydernutz

2 жыл бұрын

must have been Taylor Made

@BoatingWithBoogaboo

2 жыл бұрын

Urrrt! Guess again 😜

are these Bomar port lights ? I just need to know ! The port light in this video look just mine in my 2001 285 SSi Chaparral

@BoatingWithBoogaboo

Жыл бұрын

Yes, Bowmar on this boat. If you're ever looking for parts, I'd highly recommend not dealing with them directly. Best off by sourcing whatever you need from third party vendors.

Paul, do you have a link for the gasket's? I need the same ones

@BoatingWithBoogaboo

2 жыл бұрын

Watch the video again.

Why not share where you got the gasket? FYI for the several other people I see asking for this info: I hear Steele rubber is a good source for most boat gaskets and seals.

@BoatingWithBoogaboo

2 жыл бұрын

I DID mention it in the video. Not sure why so many missed it....

Great. Where did you order the gasket? I have a 320.

@BoatingWithBoogaboo

2 жыл бұрын

That's too funny 🤣

@kennethbrooks3767

2 жыл бұрын

It would have been helpful to provide a source rather than talking around it for 3 minutes. Why bother doing the video if not providing sources? I'm glad the Sea Ray owners I know are much more helpful. Try this site: pompanettellc.com/product-category/spare-parts/portlight-replacement-parts/replacement-screens-for-extruded-portlights/. Might want to join the Sea Ray club, these owners are very helpful. www.clubsearay.com/index.php?threads/bomar-portlight-gaskets.87870/

Has anyone been able to find these gaskets? I've spent hours looking for these online. Pre-cut to fit and the double sided tape looks like it's the best way to go. Thank you

@BoatingWithBoogaboo

2 жыл бұрын

Try SeaRay-Parts.com. I think they have something that would work, but no two way tape. Easy to just put them in with silicone as the adhesive.

@spydernutz

2 жыл бұрын

@@BoatingWithBoogaboo Thank you very much

Where did you order the replacment seals

@BoatingWithBoogaboo

2 жыл бұрын

I thought I made mention of that in the video.

@robtaylor7349

2 жыл бұрын

@@BoatingWithBoogaboo .....you could just post a link...great videos!

I have a 2004 28ft Sea Ray. I can not find a seal. I can only find it in strips. Did you buy your gasket in size or did you have to cut it?

@BoatingWithBoogaboo

2 ай бұрын

These came as one piece items. That said, I will not mention nor recommend the place where I bought them, as the customer service was absolutely horrible and they are not worthy of mentioning. Check it out; kzread.info/dash/bejne/omuNkq6hiNitorQ.htmlsi=49WtEN3Gu5A6O7a7&t=590

@user-vm7mq7zz8u

2 ай бұрын

@@BoatingWithBoogaboo. Well, I would like to know. I am at a dead end.

@BoatingWithBoogaboo

2 ай бұрын

@user-vm7mq7zz8u Try a Google search for bomar screen and gasket kit sea ray

@user-vm7mq7zz8u

2 ай бұрын

@@BoatingWithBoogaboo would the gasket you used fit my Sea Ray and if so which one?

@user-vm7mq7zz8u

2 ай бұрын

I bought the seals. They were not the exact size I cut them to size but it works. The screens I have writing on them. “Remove when shutting window”

I didn't see any info about changing the screens. Info from anyone please?

@BoatingWithBoogaboo

11 ай бұрын

Exactly!

where to buy the rubber gaskets ?

@BoatingWithBoogaboo

4 ай бұрын

I found them online.

May I ask what you paid for your boat?

@heelside226

2 жыл бұрын

Probably around the 120k CDN mark

@BoatingWithBoogaboo

2 жыл бұрын

More than we initially had in mind, but no regrets and am happy with the value in that vessel.

@christopherozolins4724

Жыл бұрын

wish my 370 was that clean im getting there !watching videos

Your better when you talk and no music ! Just saying

@BoatingWithBoogaboo

2 жыл бұрын

Sometimes it's not possible to record voice audio, such as in this case. I'm only trying to help folks out, but this video seems to have fallen short of that goal, making me wonder if it's worth the effort sometimes. Just sayin'.

@paulsanchez4141

2 жыл бұрын

@@BoatingWithBoogaboo great video as always !! Didn’t mean anything love your show