i was thinking of building a deep sea submersible, but don't wanna spend $$$$$ on titanium. this looks like it'll be perfect!

@scotthorning1180

5 ай бұрын

Cruel… yet I laughed.

It would be interesting to have a regular fibre glass panel as a control or comparison.

Thanks for the taking us on your research and simulation. Excellent!

This is fantastic backyard science. Especially all the different ways you tried to stress / damage the different materials. Great job man!

@lukeFugate

3 жыл бұрын

Glad you enjoyed it!

regarding bubbles. I used to attach oil paintings on canvas to masonite. I used carpenters glue. The first one I ever attached got bubbles because I used too much glue and it was uneven. After making sure the glue was a thin even layer and using a rolling pin to apply pressure I never got any more bubbles.

@lukeFugate

4 жыл бұрын

Great tip! I'll give it a try.

Great test. This gave me the answers I’ve been looking for about how tough PMF is.

@lukeFugate

2 жыл бұрын

Its very tough. Thanks for watching.

Looks like it came out pretty good. I am looking forward to your project!!!

@lukeFugate

4 жыл бұрын

Thanks!

this video made me dump lots of time into making pmf campers, this last run i have so much confidence in pmf Im going lazy and coating the outside of an rv with pmf. thank you so much you have a lifetime sub from me

I bet you could make a nice lightweight boat out of that. Or a truck topper. Or an ice chest. Or a garden shed. Or a pickup tonneu cover. Or...or... a lot of things!

@lukeFugate

4 жыл бұрын

Yeah, the possibilities are endless.

@douglasgallardojr4759

Жыл бұрын

The limitation is only the joints.

@RoyalEmpressTree

11 ай бұрын

Don't forget private jet

@anitabellefeuille7362

8 күн бұрын

I was thinking a she shed for me. If it can withstand highway speeds, it should withstand the wind around here. Just deciding what kind of framework for it.

That was awesome Mr Fugate. It was a lot tougher than I thought it would be. Has always Liked,shared. All my best.

@lukeFugate

4 жыл бұрын

Thanks. It surprised me too.

Your tests were sufficient to answer all of my questions about PMF building. Thank You. I have to admit, the video could have been made in about 1/2 the time you took. I would recommend you either continue to make "Testing Videos" or see the networks for an audition for being a game show host...one or the other. :>)

@lukeFugate

3 жыл бұрын

Glad it helped! LOL game show host.

@theaussienurseflipper.8113

2 жыл бұрын

Lol

this is the first video of yours that I have come across, Dude that C10 bed in the intro is the COOLEST thing i have ever seen in my life!

Just what I was looking for! Thanks for this experiment!

@lukeFugate

2 жыл бұрын

Hope it was helpful. Thanks for watching!

You answered a lot of my questions about using PMF for my bike camper I'm going to start building in January. I'm sure you stressed it more then anything I could do to it. I wonder how much of a difference using different formula insulation would make, 150, 250, 400, 500, and 600. I'm sure building anything with 400 or better will create some amazing results for people. I'm glad I came across your channel while researching PMF. Thank you for the testing you did.

Nice scientific testing and gave me the giggles. Looks like both different types of PMF held up pretty well. 👍

@lukeFugate

4 жыл бұрын

Glad you enjoyed it. Yes they both surprised me.

You are my favorite scientist. thank you for this.

@lukeFugate

3 жыл бұрын

Wow, thanks!

This is valuable information. Especially since these are more realistic tests than a lab.

@lukeFugate

Жыл бұрын

Glad You liked it.

I would surmise the reason the Cannes had more deflection is due to the fact the chances was applied without stretching. You stated when you applied the sheet you stretched it pretty tight which would basically be preloading it with stress as compared to the canvas being applied without stretching the fibers. Instead of the bed sheet I think an interesting combination would be first layer covered with Fiberglass window screening with the canvas over that. The way it was is impressive but I wonder if the inexpensive window screening would reduce the flexing or if it’s inability to stretch would cause it to fail. Just some thoughts.

@lukeFugate

2 жыл бұрын

Good point it would increase tensile strength.

Very cool video. I appreciate the time and effort that went into it!

@lukeFugate

2 жыл бұрын

Thanks! Glad you enjoyed it!

Funny and informative. Good combo. Thanks for sharing

@lukeFugate

3 жыл бұрын

Glad you enjoyed it!

Man I needed this!!!

@lukeFugate

4 жыл бұрын

Glad it helped!

The insulation and other logistics of fitting the chosen material with all the things even just a hobby project would need almost sounds like a nightmare in ways.. But you'll find a way; you always do.

@lukeFugate

4 жыл бұрын

It should work out. I'll have to add pieces of wood in the areas where hinges or other parts will go.

Sorry question was to early watched the whole video. Great Video. Just what I was looking for, going to build hollow pontoons and cover them with PMF thanks again.

@lukeFugate

3 жыл бұрын

Sounds great! It should make great pontoons.

I appreciate the effort. Thank you

@lukeFugate

3 жыл бұрын

Thanks for watching!

The ATV reminded me of an old Timex watch commercial. It takes a lickin and keeps on tickin.

@lukeFugate

4 жыл бұрын

Yeah, it has been a good one. Not the prettiest, but it does the job.

Great video. What a riot! I would like to make a camper for my motorcycle out of PMF because it's light weight. Now I know it's durable too. It's good to know it would stand up to getting run over by a bus, but I'll try to avoid that.

@lukeFugate

Жыл бұрын

Thanks! Yes, it would be great for that.

My theory of why u have air bubbles with the bed sheet is that the bed sheet may have fabric properties that does not allow the paint to fully adhere or absorb to the bed sheet fabric whereas the painters cloth does adhere or absorb to the paint. Interesting experiment Luke. The painters fabric did not hold up so well under scrutiny of the twisting of Zephyr front tire...perhaps the roughness of the painters fabric with the paint, and the bed sheet fabric held up the Best under the scrutiny of the twisting of Zephyr front tire...perhaps the smoothness of the bedsheet fabric and the paint with the air bubbles. I do like the idea of the combination of painters Fabric & bedsheet fabric. I might add that u may always have a problem with air bubbles...with the bedsheet fabric...the paint & the bed sheet properties are not balanced enough to make it without air bubbles as the properties of the painters fabric and the paint. Sorry...😞😞 as my usual writing ✍️ is FULL of Emojis 😂😂👍🏼 🧰✂️ 📐📏😀😀👍🏼.. I wrote without them above 😜😜🤪

@lukeFugate

4 жыл бұрын

I didn't originally think either one would survive Zephyr running over them. It's a stronger material than I thought. I think I will try the bed sheet and painters cloth as a composite material. I will try a small piece to see, and if the bubbles make a reappearance I will just go with the painters cloth alone.

I am sick and tired of repairing my paint job every damn time I get run over by a bus.

@lukeFugate

3 жыл бұрын

lol

@OOICU812

Жыл бұрын

Just be glad you survived each time. 😆

This was awesome thank you for the video!!

@lukeFugate

Жыл бұрын

Thanks for watching!

The exact info I needed for building my hillbilly catamaran floats. Thanks dude!

@lukeFugate

Ай бұрын

Glad I could help!

Have you thought of trying PMF on real thick corrugated cardboard? Then there's the possibility of foam with cardboard facings.

@lukeFugate

3 жыл бұрын

It would be worth a try.

@GarretSterling

Жыл бұрын

Exactly my thoughts as well, has anyone tried it yet?

How about seeing how well bed liner sticks to them and then test them.

Both of those seemed incredibly tough! At the start of your video I told the wife, you watch, he'll run over them with something, lol.

@lukeFugate

4 жыл бұрын

LOL you know me! I figured it would just disintegrate under the tires. I was way wrong.

@zaynemaxwell5169

3 жыл бұрын

you prolly dont care but if you are bored like me atm you can watch all of the new movies on InstaFlixxer. Been watching with my brother for the last couple of days :)

@laynesawyer1640

3 жыл бұрын

@Zayne Maxwell definitely, have been watching on instaflixxer for since november myself =)

I would rather see a stress test with dropping weight on it, bending weight to breakage, how much weight to pull the fabric off. I am more interested in the structural integrity, rigidity.

@lukeFugate

3 жыл бұрын

I may do a follow up video to this.

A real test would be leaving the panels outside where they were exposed to all types of weather and sunlight for at least 6 months.

This just might work for my boat pontoons!

@lukeFugate

3 жыл бұрын

It would be an excellent material for that I think. Good luck!

that stuff is impressive, Im always amazed at how tough my toilet paper and paint props are and that pmf appears stronger. It looked like the rock that cut through the sheet hit with the edge but it hit the canvas a little flatter. Im looking forward to seeing how you design the body

@lukeFugate

4 жыл бұрын

Yeah, it surprised me.

@douglasgallardojr4759

Жыл бұрын

You taught me a new method of paper-mache. Thanks!

@docink6175

Жыл бұрын

@@douglasgallardojr4759 its amazingly ez to work with

It’s a amazing. What kind of rust oleum paint did you use sir ? I am trying to build a plywood kayak.

@lukeFugate

4 жыл бұрын

It was Rustoleum blue here is a link to it www.hardwareworld.com/pec0q0t/High-Performance-Protective-Enamel-Safety-Blue-Gallon?gclid=Cj0KCQjw_ez2BRCyARIsAJfg-ktVGlsQZgnQU6M8RAJFiTpCLScJb7-uWbQJd3JT-wrrnzBAqKJ98k4aAi_hEALw_wcB

Have you washed the bedsheet with degreeser? When new there is a waxy coating and also a littlebit waxy coating when washed with washing soap for clothes. I wonder how to prevent these bubles.

@lukeFugate

2 жыл бұрын

Had not tried that. thanks for the info.

Another benefit to PMF is easy repair - If you scratch or dent standard car paint it takes a bit of expertise and finesse to make an invisible repair - with the rough surface of PMF repairs will blend in much easier. * Always keep in mind that paint can change hue as it cures - If you have something a few years old that you touch up with the exact same paint - it can stand out like a sore thumb for a month or two until the spot cures and blends.

@lukeFugate

2 жыл бұрын

Good point!

@getlostgary9380

2 жыл бұрын

@@lukeFugate - scratches a nicks in paint would, of course be no problem. But even punctures and dents would be easy (I think). Use some kind of filler, or bondo, to patch and, before it sets, use a piece of canvass to imprint the texture on the patch before painting.

@lukeFugate

2 жыл бұрын

@@getlostgary9380 That would work well.

@Charlemagne1367

5 ай бұрын

@@getlostgary9380 Not a lot of bondo needed. Just put a hairdryer or heatgun on lowest setting to it and the dents will just pop up again.

Well made I'm interested in making that stuff.💯

@lukeFugate

4 жыл бұрын

Go for it! It is good stuff. surprised me.

thanks ...great vid👍

@lukeFugate

3 жыл бұрын

Glad you liked it!

TRY WINDOW SCREEN . FOAM+SCREEN+FABRIC+PAINT. IN THAT ORDER AND INCREASED STRENGH.

Hi Luke. How much does it weigh compared to wood? Like ply wood or 2 by 6.

@lukeFugate

4 жыл бұрын

It is extremely lightweight. Hardly weighs anything. I would say wood is about 5 times heavier.

Great video, hilarious and instructional. I am thinking of building a camper. So PMF is the way to go. You should apply for a job with National Institute of Standards and Technology.

The only video I've seen of any one taking an engineering mindset and actually testing this stuff to see how it would hold up over time. Rather than a it looks like fibreglass, it smells like fibreglass therefore it's the same approach. Interestingly with the current move towards forcibly turning everyone into a card carrying long haired sandal wearing hippy the composite industry is slowly moving towards natural fabric based composit materials.

@savage6394

11 ай бұрын

In what ways is the Composite industry “moving towards forcibly turning everyone into a card-carrying long haired sandal wearing hippy”?

I’ve seen quite a few of these videos and am impressed with pmf. But what I’m really curious about is the crush strength- would it hold up to being walked on regularly or would it crush and delam? …Like on the roof of my boat I’m building. Any experiences or thoughts would be appreciated!

@marcuschute7392

Жыл бұрын

Did you end up using it for your boat roof?

@TenSpeed2007

9 ай бұрын

I don't know if you've used it yet or not, I would go with 1/4 inch plywood under at least a formula 400 or better and then another 1/4 inch piece of plywood. You would have a nice foam cored piece that could stand up to people walking on it without damaging it. The 400 is 40 psi per square inch.

I was impressed with the pmf during the entire test, but worried about the bad noise coming from your steering system on the bus. You might want to test the bus more.

@lukeFugate

Жыл бұрын

lol yeah I guess it could use some grease. I have greased it since that video. It wasn't as bad as the camera mic made it sound. Thanks for watching!

Theres a guy who has a KZread channel that builds campers. He's building a truck camper and he uses poor mans fiberglass on his camper builds. He uses bed sheets, he has a technique that keeps the sheet looking good, no bubbles. He also said the bedsheets are a smoother finish then the canvas. Anyways you may want to look for his channel to get some ideas of how to PMF. I can't remember his name or channel, just type in the search bar DIY campers and may want to try searching DIY campers builds with PMF Im sure you can find him. His bedsheets PMF turned out really nice. The videos I seen he was building a truck bed slide in camper....

@lukeFugate

2 жыл бұрын

I'll check it out, thanks.

Hi, what have you put in the middle . Is it timber or foamboard insulation?. Thankyou

@lukeFugate

3 жыл бұрын

Foamboard insulation.

It occurred to me watching the food trailer update that the panels could possibly be used in place of the 2x4s in that trailer. They hold up pretty good on the flat, but you didn't test them on the edge. I suggest you find something that can actually measure how much force is being applied. I may suggest it as a test for Matthias Wendall.

I think the sheet did just as good as the other. No one is going to let a bus run over there camper or what ever they make out of it. I'm going to make me a tiny home out of foam and use either the canvas clothe or even a sheet for the outside and inside to give it the strength it needs. So I guess tight bond glue won't eat through the foam. I'm going to try and make it and 8 ft by 12 ft or maybe even go 16 ft tiny home to pull behind my car. I love doing stuff like this. Thank you for your info. God bless 🙏💞🙏

@lukeFugate

3 жыл бұрын

Yeah I guess if you have a bus run over the camper there may be bigger problems lol. Good luck on your build.

@kimsikorski5691

3 жыл бұрын

@@lukeFugate lol, true.

have you done any tests for compression? Like if you built a cabinet and the sides were made up of foam with PMF coating. How strong do you think it would be?

@lukeFugate

8 ай бұрын

Haven't done anything like that. I would assume that as long as you build a wood frame for the cabinet and a wood bottom to hold the weight, it should work well.

Composites for the win !!!

@lukeFugate

4 жыл бұрын

Yes, they both surprised me. If I had realized they would be so tough, I would have come up with tougher tests. The last one was supposed to destroy them both.

Wow that stuff is strong! Next test - does it work as the deck of a bridge?!

@lukeFugate

4 жыл бұрын

I would say it wouldn't work for that, but it proved me wrong before lol.

@dsteele27

4 жыл бұрын

LOL

@RadicallyLowly

4 жыл бұрын

😂😂😜

I wonder how well titebond 3 or landscape fabric would work in those applications

@lukeFugate

Жыл бұрын

That would be a great experiment. It should be very tough.

you need to use a "control" for these tests to show what happens to other more durable material in the same test.

@lukeFugate

7 ай бұрын

True, that would be better.

I have used muslin and glue for “Dutchman” seams on theatre set designs, on a wood frame. I think that muslin would work even better than canvas or bed sheets. The only question I have is was the canvas and bedsheets washed and dried before using to prevent shrinking or if maybe shrinking would help tighten the cloth to the substrate? Muslin is very inexpensive and comes in wide enough widths that you can do large walls without seams.

@lukeFugate

20 күн бұрын

Thanks for the tip. I'll check it out.

Did you use it for the trike? I want to make a cover for the engine of my trike but how would you mould it to the shape you want?

@lukeFugate

3 ай бұрын

Sorry, the trike fell by the wayside because of legal issues getting it titled. My thoughts were to use thinner pieces of foam insulation which would bend. Might have to make relief cuts in places to form compound bends, but it would be doable. Could also double up on the fabric and glue layers to make it stronger.

Luke I read through some of the comments didn’t see my question. What is your poor mans fiberglass covering?

@garethbaus5471

2 жыл бұрын

Foam.

I’d love to see foam skinned with uncoated breathable 1oz ripstop nylon and WBPU and/or titebond compared to regular duck canvas and wood glue PMF, for super ultralight applications like pedal powered bike campers

That's amazing cool thing!!! Titebond Wood glue (we have analogue here PVA D3 wood glue - also strong and waterproof) and canvas... amazing! is it necessary to put it over _styrofoam_ only or other infill materrials (cardboard maybe, or plywood, or drywall) possible? is it possible to use not canvas but maybe _other textile types_ ? I have "crazy idea" to build bicycle (frame and even wheels maybe) or maybe possible even velomobile using cardboard (many layers) and PMF over it. What do you think? Is it possible? :-)

@lukeFugate

3 жыл бұрын

Yes it can be done.

@douglasgallardojr4759

Жыл бұрын

Please do this.

Before fiberglass the nacent rec boating industry and new England lobster fishermen used pmf over wood decks wnd superstructure (not boat hull) because it was more durable than paint or varnish that required regular maintenance and replacement between 1-3 years in New England weather depending on use intensity.... Pmf lasted longer but still required maintenance and periodic replacement... Just not as often, plus it gave a nonskid surfaces for decks (we are talking 1920-1960 or so

@lukeFugate

Күн бұрын

Thats pretty cool! Thanks for the info.

Painters drop sheet will let air through the adhesive

Think this will work good for making a freezer?

@lukeFugate

3 жыл бұрын

Yes, definitely. That's a great idea. Maybe double, or even triple the layers of foam and it would hold the temperature well.

You can use just latex paint (no glue required). Paint item, add cloth, immediately repaint while still wet...

@SuperCyril2

6 ай бұрын

Glue adds strength to the fabric.

That just looks like a good day hell yeah man do you good video 👍

@lukeFugate

8 ай бұрын

Thank you, it was a fun day.

Luke, whatever happened to the trike? Looked for videos of it on your page, but there doesn't seem to be one.

@lukeFugate

Ай бұрын

In my latest videos I have started working on it again. I got too busy with other projects and it got pushed back into the weeds. Here is a link to the video where I decide to revive the project. kzread.info/dash/bejne/YqRluMR-e87Udqg.html

Fiberglas on Plywood is more to use a Material (Plywood) which does Not call for precise and Energy excessive Bonding Like metal and make a baselayer (Epoxy-resin + Fiberglas) for further waterproofing (gelcoat, which protects the Epoxy from damage thru UV-light). The stiffness of 2 Plates of multilayered Fiberglas and Plywood or foam as Core is already in 2 different classes. Plywood with it's Natural wood cement "lignine" is stronger regarding vertical pressure than many foam/foam-cores. If Something is stiff by the Plates (Fiberglas) and it (wooden Core) is less stiff than the Plates the strenght as tension flange is still there but less important. The resistence against pressure is important for stiffness. A wooden-core of an alpine-ski is a combination of Plywood-like structures and cross-grained wood. The Flex vs. Torsion-stiffness is the Art of engineering there. A compound with wooden Core is not easy to outperform. The structure of Balsa Wood If you Look on the cross-grained surfaces in a microscope the Structures is another solution by the Nature compared to honeycomb-structure. Like honeycomb the Walls created by Cellulose and cemented by lignine stand vertical. As lignine fills the structure you can Bond Balsa cross-grained wood to e.g. Canvas even better than e.g. Nomex-/Kevlar-/Aramide honeycomb-core Material to Fiberglas or Carbon-Plates. More or less prepreg-concept is the only way to Bond Fiberglas/Carbon Plates with Aramide-honeycomb-cores. As Tidebond also can handle cross-grained wood "the poor man's" compound based on Canvas and wooden Core Out of "Cross grained Wood" is realizeable. Balsa is very light but has very weak robustness against moisture. There are other wood-types Not too heavy while offering better robustness against moisture. Regarding the waterproofing it should be easy repairable by easy overpainting and patching. Something which is Not topped with Tidebond and painted with Latex from the First layer can Not been easy repaired or overpainted. If you dilute Brantho-Korrux 3-in-1 it's even penetrating uncovered Canvas. Last Layers with Iron mica Colours of Brantho-Korrux 3-in-1 give thicker Layers of Paint. Brantho-Korrux 3-in-1 and Brantho Korrux Gas-/Petrol-resistant are developed for Off-Shore applications and have an approval by the German Railways. Brantho-Korrux Gas-/Petrol-resistant is less flexible. E.g. Not flexible enough for overpainting the glue filled gaps at the metal-skin of an light commercial Vehicle Like the Chrysler Van based on the Fiat Ducato (>= 3.5 Ton Class LCV). At Caravans and Mobilehomes there are areas kept uncovered so that the wood can breath. This areas you can Paint with filtered and aged linseedoil and linseedoil based painting. Wood then can still breath but is hydrophobious treated. There even exist linseedoil based Iron mica painting. www.kreidezeit.de/en/product/rust-protection-paint/ That would be for edges and Not the areas where the wood should breath Well. If you Work with linseedoil the wood should Not been covered with Canvas or other textile as linseedoil then let selfinflame the textiles. It even can selfinflame the brushes and other soaked Tools.

@lukeFugate

3 жыл бұрын

Thanks for the information.

@raystoddard174

Жыл бұрын

And all I did was ask him what time it was

On a science note, both or all of the test subjects should have been identical sizes. The weight test wasn't fair as the sheet board is twice is wide thus stronger from the start. Like comparing a 2x6 to a 2x12 in that test. I've seen other videos regarding the bubbles in the bed sheets, seems the issue is that once the sheet is wet is holds air/water (remember in scouts when you used pants legs as a flotation device, get them wet and they hold air because the water seals up the tight weave.) I'm curious of the PMF... I tried something a year back didn't didn't do well... that was canvas and fiberglass resin(sets to fast and absorbs a lot of resin). Debating and comparing between using paint and titebond II as the glue. Paint would be much cheaper as a glue.

@lukeFugate

3 жыл бұрын

True, I should have sized them the same. I would be curious to see if the paint works without the glue as well.

Hey! :) Change "Duribility" in your title to "Durability" and I bet you'll get a TON of views. Sorry for the multiple comments. Just wanted to say this was rad.

@lukeFugate

3 жыл бұрын

Thanks! I hadn't noticed that!

man, if you stack drop cloth and bed sheet, with titebond II between each, I'm pretty sure you've just made Poor Man's Adamantium LMFAO

@lukeFugate

2 жыл бұрын

LOL true!

Need more interesting new content vids.. Perhaps a outdoor stove? Wildlife Trail cam with a bridge across the brook?

@lukeFugate

4 жыл бұрын

I could do some camping videos using the ammo can stove.

You should have cut the edge off of the canvas because the edge gives you more strength than you give it credit for having cut the bed sheet off.

So what glue did you use?

@lukeFugate

2 жыл бұрын

It is Titebond 2. It is supposed to be a wood glue.

Couldn't find a dry area for that final test?

@lukeFugate

2 жыл бұрын

Nah, had to test where I could.

What kind of foam boards is that?

@lukeFugate

2 жыл бұрын

It is foam insulation boards. They come in 4'x8' sheets.

How water proof is this? My idea is digging out a pool and using this as the shell straight on dirt!!! Could it work?

@lukeFugate

2 жыл бұрын

It would probably work. My son used PMF on the roof of his food trailer and no leaks yet(about a year so far)

@douglasgallardojr4759

Жыл бұрын

It won't work for a pool long term. The pressure is too high. The first rain that softens the surrounding soil and you'll have a leak.

I was hoping you would bring a shotgun out to the party.

So the moral of this story is don't drive where it says falling rocks

I would like to see it cut open after 6 months outside in the direct sun and rain!

@neila9251

2 жыл бұрын

Or a year!

@lukeFugate

2 жыл бұрын

Good suggestion. I'll try to see if I can find them.

js if you use bedliner insted of rust oleum it will be 1million times stronger and i higly doubt the presuer waser could chip it

It doesn't appear to me that you are comparing Apples to Apples the pieces are not the same size allowing the larger size disperse the weight differently in the smaller one

What thickness foam was that?

@lukeFugate

3 жыл бұрын

It was 3/4 foam. You could use 1/4 foam and have pretty good strength though.

@jasondominguez8179

3 жыл бұрын

@@lukeFugate so I was thinking of skinning a 5x7 deer blind in 2inch foam, then pmf all the way around. The floor would be 2x4 base topped with 1/2 plywood. Wall frames would be 2x2 lumber. Think be rigid enough once wrapped in pmf?

@lukeFugate

3 жыл бұрын

@@jasondominguez8179 yes, it should be pretty rigid. That size of structure I think will be plenty strong built that way.

Why did you make the panels to different sizes???. WTF??

was this shot in your out house?

What abouts pmf just 1/4 ,plywood without the foam I have a plan, really

@lukeFugate

5 ай бұрын

That will work great.

@stanb990

5 ай бұрын

@@lukeFugate I need it for sleep platform 20inches wide and various other interior bulkheads and cabinets I can also get 1/4 inch plywood cheap cheap cheap Also part of my build will include removable boards that can double as miter saw and table saw tables. If the pmf strengthen that well. Maybe 1/2 " tho

Hear me out - and this may be a little heavy, but has anyone ever tried the poor man's fiberglass, but with resin?

@lukeFugate

2 жыл бұрын

Sounds like it would work. It would basically just be fiberglass then.

@icestationzebraassociates2460

2 жыл бұрын

@@lukeFugate Yeah, I guess it would just be a difference in material you're using then. I don't know enough about this stuff and am just watching videos and planning build. Getting different ideas. This just seems like it would be soooo much lighter.

Man…. That drop clothe is thicker than a bed sheet. I would off the top know that the drop clothe poor man’s fiber glass would be stronger.

@lukeFugate

2 жыл бұрын

Doing a few layers would also help.

Can you make a boat using pmf?

@lukeFugate

Жыл бұрын

I suppose you could. It would require a sturdy wood or metal frame to hold the shape though.

@61066clocks

Жыл бұрын

@@lukeFugate yes .over plywood..thanks for the reply

Try less glue and let the paint seal it. You can use an iron the apply the sheet.

@lukeFugate

Жыл бұрын

Thank you, I'll try that.

High thread count bed sheets can't breath...need cheep sheets. 100 thread count.

@lukeFugate

Жыл бұрын

Thanks for the tip!

@huckleberrychris

Жыл бұрын

@@lukeFugate what about using OSB plywood...the rough side. I've never tried it but seems like it would stick well. On smooth plywood I always sand it and then use a paper tiger to rough it up a bit more.

I'm go to wrap my truck and make a truck boat

Perfect example of a very NON-scientific test of two items. So many variances that its worthless to consider it a side by side test.

@lukeFugate

3 жыл бұрын

Probably true. You could make a video showing a better testing method and share the link on here if you want.

What is up with this Guy………..lol

@lukeFugate

6 ай бұрын

Must be something in the water around here.

Muito bom..👏

Mate, there r different sizes. Not fair test

Hi. Nice work. Your panel say Miami-Dade, do you have information on it? where you got it? thanks.

Is it waterproof? Can you build a boat with it?

@lukeFugate

7 ай бұрын

Yes, If you make sure all the seams are sealed very well, you could. I would recommend a wooden frame to support it though.