😮‍💨 I was ready to get a different ladder, unnecessarily frustrating. Thank you 😅

@TryThisDIYFix

Жыл бұрын

Hey I’m glad it helped! Thanks for letting me know!

Thank you for this. I had a brand new ladder but lost the instructions. I was selling ladder and because of your video, I was able to email this video to buyer. Whew!

@TryThisDIYFix

Жыл бұрын

That’s awesome! I’m glad it helped!

Made to look so easy, yet I'm having to use a hammer to try and get the round plastic pieces under the ladder steps and they still don't want to fit in. I'm exhausted and I still haven't finished; been over an hour so far

@TryThisDIYFix

Жыл бұрын

Yikes man sorry about that. It did take a few mins! But it does seem to go smoothly after it gets going. I hope this video helped some.

@cjong2829

Жыл бұрын

@@TryThisDIYFix Thank you for your message, it's appreciated. I ended up finishing it but the all 4 legs don't touch the ground at the same time (lopsided). The paper instructions provided and all the VDO's I've watch state that pole A&B are left and right, then add the steps, which I followed. However poles A&B are different lengths. I've tried taking the plastic bits off to try putting A with A and B with B, alas after all the hamming I did to get them on, won't allow me to take them off now to try a new configuration. I hope you have a lovely day (your VDO was great BTW) I think I was just provided with a dodgy ladder :(

@TryThisDIYFix

Жыл бұрын

@@cjong2829 thank you. Yeah they aren’t the best. Mine aren’t perfect either. They sway a little but as well.

@toniadams3783

Жыл бұрын

I'm here right now because my legs are not labeled at all and it's the only reason I can think of that I cannot get these steps to lock in. I will seriously have to beat it with a cinder block to get them in

@cjong2829

Жыл бұрын

@@toniadams3783 I feel your pain Toni. Make sure you set-up the pool first and fill it as you're going to need a swim after exhausting yourself in trying to put the ladder together. I discovered its easier to throw yourself over the edge of the pool instead of using the ill designed ladder (only if you're tall enough) but not safe for kids to do that.

Some of my clips aren't going all the way on, even with proper alignment.

@TryThisDIYFix

2 ай бұрын

Hmm. You might need a rubber mallet or you could need new clips.

Thanks for this. Got my Bestway Power Steel 18 x 48 from Sam's and it didn't have instructions for the ladder. Thanks so much man.

@TryThisDIYFix

Жыл бұрын

You got it! Glad I could help!

True! They looking at me now! Thanks

@TryThisDIYFix

Жыл бұрын

You got it!

Me and my boyfriend sat there for 45 mins and couldn’t figure this out🤣🤣 this video helped us do it in 10 mins.

@TryThisDIYFix

Жыл бұрын

That is awesome! I’m glad it helped! Feel free to subscribe for more helpful videos.

@deprishasmith8234

Жыл бұрын

😊😊o Oooo😊😊😊

@TryThisDIYFix

Жыл бұрын

@@deprishasmith8234 I hope this helped.

This is so helpful took 20 minutes and done😅

@TryThisDIYFix

2 ай бұрын

You got it! Glad it helped!

Thanks that was great I misplaced the instructions pretty neat clip system

@TryThisDIYFix

Жыл бұрын

You got it! Thanks for letting me know.

Thanks for the help!!!

@TryThisDIYFix

Жыл бұрын

You got it! I’m glad it helped! Feel free to subscribe for more helpful videos. Thanks

Such an excellent video. I have an urgent question. What is the length of one of the A or B legs without handle attached? I want to pack this in my suitcase to take to another country so I’m wondering if the longest parts (A and B legs) can fit diagonally in an XL suitcase.

@TryThisDIYFix

3 ай бұрын

Oh wow, I’m not sure. I can check later today.

@byanthonysookram

3 ай бұрын

@@TryThisDIYFix would really appreciate it. Thank you.

@TryThisDIYFix

3 ай бұрын

@@byanthonysookram ok, ball park is about 48” because it’s about 58” tall with the handles. So I’d guess 48”.

@byanthonysookram

3 ай бұрын

@@TryThisDIYFix you’re the best! Thank you.

@TryThisDIYFix

3 ай бұрын

@@byanthonysookram you got it!

Great video!

@TryThisDIYFix

2 жыл бұрын

Thank you! I appreciate it.

Thanks for sharing !

@TryThisDIYFix

2 жыл бұрын

You got it! Thanks for watching!

This seems very easy….I just need my own pool now 😔. Life goals

@TryThisDIYFix

2 жыл бұрын

Thanks! Y’all are big timing! Y’all should just get one! Y’all also have ocean and Disney fun stuff all around you!

What about disassemble because mine got stuck and I can’t take it apart to fix it

@TryThisDIYFix

Жыл бұрын

Hmmm. I have t done that yet. You will need to hold both ends of the screw to get the handles off and the hit the steps to pry them up.

Thanks

@TryThisDIYFix

2 ай бұрын

You got it!

So mine have extensions and there are bolt holes on all the pieces for both legs but when you try to fit them into the holes they don't go into them correctly. There's like a black rubber piece. How do you attach them? Normally I would never ask a question because it's so simple but I've been trying and cannot seem to figure it out. I think it's because I'm tired from the pool set up and just need to take a break but it's the last part other than the pump. Haha any help would be greatly appreciated

@TryThisDIYFix

3 ай бұрын

Hmmm. I’m not sure. Do they go a certain way? They might have to go a certain way so they all line up. Also I did just drill a hole in a swing because the holes didn’t line up.

@jonestown42

3 ай бұрын

@TryThisDIYFix it was definitely because I was too tired and needed a break LOL I came back to it and even though the ladder legs are all the same the White Cap side has slightly larger bolts than the black cap side. I never thought to look and see that there were two different sizes. Because they look exactly the same with the white cap for all of them. Thank you for responding sir! I appreciate it.

@TryThisDIYFix

3 ай бұрын

@@jonestown42 you got it! I hope you can now enjoy the pool!

Still took me forever and not all the plastic part went into the step.

@TryThisDIYFix

Жыл бұрын

Yeah. I think that’s ok. As long as most of it goes in you should be good. Thanks for watching and feel free to subscribe for more helpful videos. Thanks.

Should the bolt head or nut be on the inside? Looks like you used the nut on the inside, but the booklet shows different. Please clarify. Thanks.

@TryThisDIYFix

Жыл бұрын

I wanted to make it where my kids would not hurt themselves when they climbed up on the ladder. But I have 2 and I did each of them different so it’s your call.

@madmickey78

Жыл бұрын

Bolt head in is what I did

@TryThisDIYFix

Жыл бұрын

@@madmickey78 thanks!

Nice work!

@TryThisDIYFix

2 жыл бұрын

Thank you!

What happens if I put 2 As and 2Bs instead of A-B for each side?

@TryThisDIYFix

5 ай бұрын

Does it still fit?

Without this I’d be lost

@TryThisDIYFix

Жыл бұрын

Hey I’m glad it worked!

What bit goes inside the pool? The legs or the plate?

@TryThisDIYFix

Жыл бұрын

I put the legs in my pool.

@madmickey78

Жыл бұрын

@Try This DIY This is correct, the plate side has the elevating ladder designed to stop toddlers climbing in unsupervised. I assembled my ladder slightly wrong but as my only child is a strong swimmer and 8 years old, I figure it'll be ok.

@TryThisDIYFix

Жыл бұрын

@@madmickey78 oh wow! That’s cool. I never knew that.

I been fooled too n I gave up.. but now I ve some idea..😅

@TryThisDIYFix

Жыл бұрын

Awesome. I hope it helps!

Can the next video be one of the kids trying to put it together?

@TryThisDIYFix

2 жыл бұрын

Haha. That’s a great idea!

Can you do a video in hiw to get ladder slats off afyer you fitted them upside-down? 😂😊

@TryThisDIYFix

Жыл бұрын

Ha. I’ll look and see. Are yours upside down?

@madmickey78

Жыл бұрын

@Try This DIY Not now, but once locked in they're pretty tough to separate.

@TryThisDIYFix

Жыл бұрын

@@madmickey78 yes you are right about that!

What is the weight limit to these ladders?

@TryThisDIYFix

Жыл бұрын

Hmm. I’m not sure.

@madmickey78

Жыл бұрын

150kg

Could see what you’re doing here f the video wasn’t so fast

@TryThisDIYFix

Ай бұрын

Sorry about that. You can slow it down some. Change the speed to .75 and that might help. Thanks.

It is not very helpful if you make a fast recording I can barely see the clips

@TryThisDIYFix

7 ай бұрын

Sorry about that. I tried to speed through the parts I did multiple times.