I know this is an old video, but great information for people like me that are just getting into polymer80 builds.

I agree with the Apex trigger! I bought the trigger shoe and and swaped out the glock oem shoe with it. Very easy to do. I polished the trigger bar. Very pleased with the results!

@SkinnyWaterVibes

3 жыл бұрын

Tony Fisher great to hear! I did forget to mention that the trigger is polished so maybe just the shoe is the way to go! I fired it on Saturday and besides the slide lever, it performed just great! Thanks for the confirmation!

@tonyfisher5322

3 жыл бұрын

aimsurplus.com/apex-glock-trigger-body/

@SkinnyWaterVibes

3 жыл бұрын

Thanks Tony!

Awesome video! I built a 19 & a 26 in the past 2 months I had a lot of fun. On the 19 the lever was garbage to begin with I wasn’t sure a good replacement what did you get? From poly80 or from another company?

great video, everyone in the P80 community has issues with rockslideusa from what i'm seeing i grade them a huge F

There is a small internal shelf on P80 frames that needs to be shaved down a little to allow the slide release to completely bottom-out under its spring pressure.

Did you ever hear of the P80 Front Locking Block Pin Or Trigger Housing Pin causing slide drag and trigger inconsistencies? I left it out altogether and it resets perfectly without it. Is it necessary if the G19 doesn’t have one?

Great video! Just ordered a couple of those slide lock releases for 2 of my P80 43. The P80 broke on me, and all ive done is dry fire it haha.. looks like you're in AZ maybe ill see out there as i am too

Do you know what exact parts kit you used ? I keep seeing all the bad stories of slides sticking , and things not functioning correctly.

Try the gen 5 Glock trigger , only have to do minor mod to fit it

@SkinnyWaterVibes

3 жыл бұрын

Will do! I'll do some research on what mods need to be done. Thanks

Did u use the internals and spring that came from rockslide, i have a desert sand one it looks awsome havent fired it sence i built because ive been focused on my ars

@SkinnyWaterVibes

2 жыл бұрын

I did actually. I had one probably with an extractor that I had to replace with a factory OEM one, other than that, all good.

how long you waiting for your glock 19 polymer 80 when you ordered ? i think most people need to know.

@erikhernandez8238

3 жыл бұрын

i bought mine on feb 1st on jsd supply it says 2 weeks later from the day u bought it

what magazine would fit this

Where did you get your barrel?

Do one for a 17

@SkinnyWaterVibes

3 жыл бұрын

How about a 34? That’s what I really want to build.

@SkinnyWaterVibes

3 жыл бұрын

Also, I just put up a video with some updates this this build, check it out.

@matthewfluke7957

11 ай бұрын

I put my p80 frame in the freezer before milling and drilling. It actually helped with burring and melting.

In order to get the slide release to fit better, I removed some material where the release sits in the frame. No more unwanted slide locking.

@SkinnyWaterVibes

3 жыл бұрын

cracky1970 unfortunately mine is a bent slide lock lever spring but my new one should be here today so I’ll let you know.

These and shadow systems are cool but I still like my stock glocks with the only thing changed is the guide rods. I have shadow systems and still like my stock glocks better

@SkinnyWaterVibes

Жыл бұрын

I completely agree and I’ve since gone back to stock Glocks. I’m planning to make a video on why.

@D-A-1776

Жыл бұрын

@Mike . Yeah I like my shadow systems and all but something about a stock glock is my go to

Can I use gen 5 slide on a glock 19 PF940C frame

@andybars8672

11 ай бұрын

No

i like your t shirt!

now your name is shaggy cow!

Why don’t just put n Aimpoint pro on that slide the holosun is so big

No matter how I tried to build one I can never find a reliable source that actually has parts in stock

What would be the best website to purchase everything I need for this build? Or even something like it

@mazz9463

3 жыл бұрын

rockslideusa.com exactly what he has

@DanielScariti

3 жыл бұрын

80pbuilder

@SkinnyWaterVibes

3 жыл бұрын

MAS Defense currently has a lot of lowers in stock, go get a lower, then find the parts kit on eBay or somewhere that has them.

@troublesum93

3 жыл бұрын

@@DanielScariti just ordered one from there how long did it take you to get

@DanielScariti

3 жыл бұрын

@@troublesum93 takes like 1-2 weeks

How’s the RockSlide running now?

@SkinnyWaterVibes

3 жыл бұрын

Still running great! No issues other than the coat they use is kind of poor.

@torreyalston7979

3 жыл бұрын

@@SkinnyWaterVibes Great! I can deal with coat issues. No worries there. Thanks!

Where you get ur kit from that’s in stock???????

@SkinnyWaterVibes

3 жыл бұрын

Goon Scam got this one from Brownell’s.

@goon7035

3 жыл бұрын

Official US Patriot the whole kit😬

@SkinnyWaterVibes

3 жыл бұрын

Goon Scam just the frame. I got the slide from Rock Slide USA and the lower parts kit from eBay.

@SkinnyWaterVibes

3 жыл бұрын

They are back in stock at brownells and Midway USA.

Nice, working on my first. Sub'd

@SkinnyWaterVibes

3 жыл бұрын

Thank you! They are fun, just take your time, watch the lines and you'll have a great pistol in the end!

@g-townarmory6858

3 жыл бұрын

@@SkinnyWaterVibes i whimped out and did a serialized for my first. Bit its coming out nicely

@SkinnyWaterVibes

3 жыл бұрын

@@g-townarmory6858 you didn't wimp out, deciding to own a $150 piece of useless polymer, if I messed up, kept me from attempting it for a long time.

Put A stake on Rumble and Parler👈

also checkout knightfall customs for custom P80 holsters

trigger well*

@SkinnyWaterVibes

Жыл бұрын

What?

Now ur just Mike

@SkinnyWaterVibes

Жыл бұрын

Who?

FRIENDS DONT LET FRIENDS BUY ROCKSLIDE USA SLIDES!!

@SkinnyWaterVibes

Ай бұрын

Have you ever owned one of their slides? I own two, thousands or rounds, not a single issue.

@jamiedees8223

Ай бұрын

@@SkinnyWaterVibes yes Glock 26 gen3 slide first one wouldn’t even go on the frame with the barrel that came with it as the barrel was out of spec. When they sent a new barrel after about 400 rds the slide cracked in the porting area. They replaced it but I haven’t even messed with it again. The quality is not good and U can tell that comparing it to a good well made slide. So I’ve had it for about 3 yrs now in the box collecting dust because I like quality.

Why not show the guns up close?? This video did nothing

i dont get the point of doing these....?

@martintaylor984

4 ай бұрын

Not registered/ serialized to you so if the government ever tries to take guns the won’t even know you have one

@interdimensional-eh9yk

4 ай бұрын

We used to build Legos now we build bangers