When this video will get 50 or more push of "subscribe" button we will do several new video about "1. How this polycarbonate roofing feel self after half year of using. 2. How can you do timber patio by self, how much does it cost, where to buy parts and so on ". Now video has 5 subscribes....

Excellent.

@mjsvlogs8716

4 жыл бұрын

Sir tanong lang po. Ano po ung ini spray mo sa dugtungan? Salamat.

Очень красиво...

Missed the aluminum tape on the top end and the ventilated tape at the bottom end to prevent moisture from going in.

@sjumpers

2 жыл бұрын

Two years later in our climate, it is ok without aluminum tape on the top end and the ventilated tape at the bottom. Checked.

What kind of wood is that and how did you finish it?

I wat to make double wall acrylic similar to double wall POLYCARBONATE sheets. Do you think the double wall acrylic with have a better insulation property's that the double wall polycarbonate ? I'm attempting to make a glass studio/office.

Can you join these sheets long ways as my lean too is 5mtrs long

What silicone is used between sheets and wall

Can you tell me the name of the screw type you are using? I cannot find that kind anywhere where it has the large piece to seal the hole. Thanks for any help! This looks great! I am getting ready to replace the top of my patio area like this.

@sjumpers

3 жыл бұрын

Italian made screw 10 pieces x 6 cm x Ø 6 cm from leroymerlin. Photo is here... fdrrecipes.com/35-supermarket-jumpers/testing/884-italian-made-screw-10-pieces-x-6-cm-x-o-6-cm-from-leroymerlin.html

@ThePhamtastic1

3 жыл бұрын

@@sjumpers Thank you! Now I have to find an equivalent in the US.

@ronlaverdiere

3 жыл бұрын

@@ThePhamtastic1 I don't know for sure if it is proprietary, but the company that supplied the roofing kit is Onduline and that is the type of screw they manufacture for their panels. In North America just use the roofing screw that has a 1/2 inch neoprene washer that seals out the rain. There are several brands such as Tuftex at Lowes.

Is there any specific reason why you didn't use so-called "breather" tape at the end of PC sheets? Or are they just a gimmick by any chance?

@ronlaverdiere

3 жыл бұрын

The breather tape allows humidity to vent out the bottom. Solid tape at the top prevents water and insects from getting into the sheets. Also, should vacuum out the holes after drilling. Anything that gets in there from drilling is going to be in there for the life of the roof.

What were those strips called that you put in between the panels?

@ronlaverdiere

3 жыл бұрын

Between the panels is H trim. At the ends is U trim. The spray bottle he used was probably a mix of dish soap and water - makes the polycarbonate sheet a bit more slippery for pushing the trim on.

@double_ey

3 жыл бұрын

@@ronlaverdiere pretty sure the spray bottle was wd 40 mate

What is the brand of the sheets you are using

@sjumpers

4 жыл бұрын

Makrolon® Polycarbonate by Covestro

Any contacts for getting quotes

On the edge of them, you fitted that end caps, but the water from boards is leaking through there, and fills up the panel square holes. Looks horrible while raining. I need to do mine better, probably seal the top of the end cap with silicone.

@sjumpers

3 жыл бұрын

we had not a rain yet in 2020. But season of rains is coming. Will see how it will be, maybe seal the top too...

@ronlaverdiere

3 жыл бұрын

You should use the solid tape at the top of the panels, and the breather/vented tape at the bottom. Many will also drill small holes in the U trim that runs along the bottom of the panels - drill before installing so you don't drill through the tape as well.

Ano ung mga materyales n gmt nio s pag jabit ng polycarbonate?

Plzz tell me Price of acrylic sheet with size of length

Address please