Polish Epoxy

Тәжірибелік нұсқаулар және стиль

In this video we show exactly how we sand and polish Stone Coat Countertops. Step by Step How-To get a blemish free epoxy finish.
www.stonecoatcountertops.com products designed for the DIY customer to go pro! You Got This!
Our Store and products: www.stonecoatcountertops.com/...
Podcast: • Playlist
Tools we use:
www.stonecoatcountertops.com/...

Пікірлер: 196

  • @jenniferpagano8332
    @jenniferpagano83326 жыл бұрын

    Thanks Mike! This definitely will help me get the polishing done next week.

  • @mrpresident7832
    @mrpresident78323 жыл бұрын

    Land sakes, I wish you guys had been around back when I was in office. That beagle Lyndon had was just brutal on the tops with his claws! I haven’t seen any of your competitor brands that come close. Even if they did, they don’t provide the detailed instructions like you do. Nice work

  • @wk9483
    @wk94836 жыл бұрын

    Thanks for the heads up on the new polish! I am still picking up a tool and finding little white specks of Maguiars every once in awhile. That will make the polishing clean up much easier.

  • @lisabigger4381
    @lisabigger43812 жыл бұрын

    You are a great teacher thanks I was struggling with my counter top you made it very easy thanks

  • @mitzihoward6344
    @mitzihoward63444 жыл бұрын

    Please provide more detailed instructions for using the home polish and clean kit when you don't have a power polisher. After rubbing with the polishing compound ( can you use paper towels or what is recommended), do you have to wash off the residue with water before using the Smooth? It sounds like you are supposed to leave the Smooth to dry before wiping, but that seems wrong. It would be very helpful to include basic instructions in the package.

  • @MackGauge1
    @MackGauge16 жыл бұрын

    Thanks for the polishing update! Gonna give it a whirl today then send you some pictures. I got this.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    6 жыл бұрын

    How'd it go Mack?

  • @MackGauge1

    @MackGauge1

    6 жыл бұрын

    Well I'm better at prep, pouring, and design than polishing, haha, will send pics the pics tonight.

  • @hunterfolkedahl7393
    @hunterfolkedahl73936 жыл бұрын

    Your product has definitely evolved, I bought the nieko polisher and the McGuire's back in January when I started doing this and my results were very hit and miss and I ALWAYS ended up with polishing compound everywhere. I actually bought a hexlogic pad and put it on my orbital...it seemed to help. But this new system looks like a winner, I can't wait to try it.

  • @paulawall2448
    @paulawall24486 жыл бұрын

    Very informative! It's a lot of work but it looks great!

  • @SevenisEnough
    @SevenisEnough6 жыл бұрын

    Love your videos!

  • @FennahMakes
    @FennahMakes4 жыл бұрын

    That's great! Did you know you can also polish river tables with toothpaste?

  • @helenduncum4476
    @helenduncum44766 жыл бұрын

    Thanks for the step by step. I really appreciate how you give such detailed instructions!

  • @helenduncum4476

    @helenduncum4476

    6 жыл бұрын

    I'm polishing a bathroom countertop, and will start making the kitchen ones next.

  • @midnight121190
    @midnight1211903 жыл бұрын

    Great video (of course)! However, I wish you had taped off a part to show the comparison of the sheens! Could you maybe make a video of the comparison? Thank you!

  • @darrellmckinneysr
    @darrellmckinneysr3 жыл бұрын

    Excellent Guys

  • @kickinitwithmydawg
    @kickinitwithmydawg5 жыл бұрын

    I got THIS! Thanks!

  • @americangraffitisignsdispl9214
    @americangraffitisignsdispl92146 жыл бұрын

    I just finished my first commissioned counter top job at a cottage at a retirement village. I used the previous method using water with just the Mirka pads only and also using the Meguiar's 105 with an 8 " foam pad. It seems like it left small circular scratches in certain lighting angles that would not come out. The new couple loved it though, but I will look to use the new method to hopefully achieve a non scratchy looking surface. The cleaner is something I inquired about to you about 6 months ago. I am glad to see that you now have one because I did not know what to wipe the counter top down with to remove the residue from the polish. It looked beautiful as long as you did not touch it, lol! I will look for it on your website. Great Job and thank you for all of the very informative videos!!

  • @tchornomud

    @tchornomud

    6 жыл бұрын

    i had same issues :(

  • @JVan8313

    @JVan8313

    6 жыл бұрын

    I had the same issues with the little circles (I call them fish scales). I wasn’t sure if they were caused by the compound or the waffle pad. I did realize that over s short time those “fish scales” disappeared.

  • @BG-dv5mm

    @BG-dv5mm

    5 жыл бұрын

    Jason I have the same problem with the (fish scales) and just cannot seem to get them out, I know they come from the sanding process. I have attacked this problem from every direction I can think of, even took a cedar table to a shop that compounds and polishes million dollar motor homes, and let them go at it. They had never compounded epoxy before and had about the same luck I did. I got the finish to look super shiny but could not get the )fish scales) out so I took the legs off and sanded the top back to wood, I was sick about the time and money I had put into this project just to run it through the drum sander and start over. (you said they disappeared)? I guess i'm to OCD for this step. I have a room dedicated to paint and pouring Plastic on the walls filtered positive pressure and I clean with water and then dust before every final pour and still get dust and other tiny crap in my tables. So not sanding and polishing is not an option. ANY FEED BACK WOULD BE GREAT!

  • @TheeRocker

    @TheeRocker

    2 жыл бұрын

    @@BG-dv5mm It is from the sanding as the epoxy balls up on the sand paper. Water helps as a medium between the epoxy and the sand paper, leaving a better sanding finish... Some like to leave the epoxy less polished, appearing to be a matte finish. I'm not a fan as this is simply allowing the scratch to remain, even as fine as they are.

  • @bobwherry6157
    @bobwherry61572 жыл бұрын

    Can't wait to order a kit

  • @areuaware6842
    @areuaware68426 жыл бұрын

    And how long should the epoxy cure before polishing?

  • @daysdesigns
    @daysdesigns5 жыл бұрын

    Are you starting out low and slow at first to spread your compound then cranking it up all the way on your buffer? Curious. I have a "long throw" random orbit buffer similar to yours on the way. Supposedly those long throw polishers give better results. Yours is either a 15mm or 21mm I think.

  • @t.m.i.toomuchinformation8600
    @t.m.i.toomuchinformation86005 жыл бұрын

    How many times can this be sanded before you need to do another flood coat?

  • @pawpawstew
    @pawpawstew4 жыл бұрын

    That's a very helpful video. Would like to see you do more of these demos with pre-installed countertops. Sanding inside corners with a DA sander under top cabinets ain't happening. Would be good to see how you tackle that.

  • @kelvinseier

    @kelvinseier

    4 жыл бұрын

    Same Issue. I am thinking once i'm done with a particular git i'm going to the corners by hand and repeat with the disk and an approtiat shaped block. Probably better to do that first but only 2x pads in a kit. I don't have a lot of sf so will i see how the first grit goes and use the second disk for that if i can get away with it. If i wasn't on such a tight budget i would probably just order an extra Sanding Assortment Pack from Stone Coat Countertops and be done with it.

  • @josephcarrera7895
    @josephcarrera78953 жыл бұрын

    Does your polishing compound remove pigtail from sanding. I have watched a lot of your videos and each time I sand my coffee table I always notice I have pigtail at the end no matter what grit I sand up to. What do you recommend?

  • @salaosuleiman9561
    @salaosuleiman9561 Жыл бұрын

    U guys are doing great , l luv you men..

  • @sandyhallowell284
    @sandyhallowell2844 жыл бұрын

    How soon after doing the top coat would you sand and polish?

  • @dianecarlson480
    @dianecarlson4804 жыл бұрын

    we had a professional do our epoxy counter tops, about 11 months later we had some red stains on part of it and were able to remove them by rubbing them out with Mr. Clean Magic Eraser sheets and lots of elbow grease, but now that part of the counter top lost the high gloss, would your compound work on putting the gloss back on that part?

  • @motox3200
    @motox32005 жыл бұрын

    Polish used ? Can only see maguiers on your link. Thanks

  • @sr-sr592
    @sr-sr5924 жыл бұрын

    do you need to finsh the top coat everytime ?

  • @areuaware6842
    @areuaware68426 жыл бұрын

    About how thick is that clear top coat? Do I remember you saying about one sixteenth of an inch in one of your other videos?

  • @JerrickManswell
    @JerrickManswell4 жыл бұрын

    Can a random orbital sander be used to polish?

  • @olegahg
    @olegahg6 жыл бұрын

    What compound are you using? Thanks

  • @lindaconway6146
    @lindaconway61462 жыл бұрын

    What speed did you use on the compound and polishing? Thanks

  • @manmeat2889
    @manmeat28894 жыл бұрын

    Can this epoxy go over marble to bring back a shine?

  • @MademoiselleOG
    @MademoiselleOG6 жыл бұрын

    So basically, you sand to remove the mirror finish and make it a little more like real stone?

  • @mattpickering4223
    @mattpickering42232 жыл бұрын

    Perfect….i am redoing my backyard kitchen thanks

  • @StoneCoatCountertops

    @StoneCoatCountertops

    2 жыл бұрын

    Thank you for watching! Please let us know if you have any questions. You Got This!

  • @edwincolon9699
    @edwincolon96996 жыл бұрын

    After said and done how much resin is removed?

  • @tahiraaamer3114
    @tahiraaamer31143 жыл бұрын

    Is it important to always sand and polish every layer of epoxy table made on mdf ?

  • @mansishah2245
    @mansishah22453 жыл бұрын

    Which buffing machine do you use?

  • @joncrowley1818
    @joncrowley18182 жыл бұрын

    What grit did you end at here before beginning the polishing compounds?

  • @dimu8
    @dimu83 жыл бұрын

    Do you sand and polish each time after the final pour, or do you leave it as is after you did a job in somebodies kitchen?

  • @gaylewilliams4805
    @gaylewilliams48056 жыл бұрын

    I have tried to master this.

  • @gordyrother1836
    @gordyrother18362 жыл бұрын

    Will this work with the heat resistant epoxy? I did not use top coat for the flood coat and I have an area I had to dress up on the edge. I went to 4000 but still dull compared to the rest of the love edge slab. Any tips ?

  • @javajay56
    @javajay565 жыл бұрын

    I have been watching all the

  • @aaronlandry3978
    @aaronlandry39784 жыл бұрын

    what is the finish you use on this??

  • @metals2546
    @metals25465 жыл бұрын

    Wonderful instruction and thanks for sharing. I have sanded epoxy numerous times, (not even close to knowing what I am doing!), but whatever I do I can't seem to avoid those dastardly fine swirl marks from the orbital sander, even when starting at 180 grit and working up to 2000 and even higher. I always seem to have those marks. Any suggestions on how I can avoid/remove those marks would be much appreciated. I tried both the dry sanding disc and wet/dry sanding paper.

  • @rohankumara8712

    @rohankumara8712

    3 жыл бұрын

    Use 3M swirl mark remover liquid.

  • @michellesobey1943
    @michellesobey19433 жыл бұрын

    How often do you have to polish?

  • @nichogamino7018
    @nichogamino70185 жыл бұрын

    Great video.. thanks

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Thank you for watching Nicho! We are here to help, have you sanded and polished before?

  • @nichogamino7018

    @nichogamino7018

    5 жыл бұрын

    Never did, but after watching your video I was motivated. I completed my project. Thanks

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    You Got This Nicho! Call or write us anytime with questions or for project support. (541)450-1976

  • @debbiefreeman2204
    @debbiefreeman22042 жыл бұрын

    What compound did you use ?

  • @angelinafields4912
    @angelinafields49123 жыл бұрын

    How do I get shiny lines out of a wooden apoxy table?

  • @skinnydog4
    @skinnydog43 жыл бұрын

    Maybe this will work for my bathroom countertop, I had a good pour, but saw some debris in it when it dried. I dont want to sand down and repour another top coat.

  • @suzannecrawford7015
    @suzannecrawford70152 жыл бұрын

    I used the polishing compound and it did add a gloss to my tabletop. But then I used the liquid smooth and it made the finish dull again. What causes that? Isn’t it supposed to keep it glossy?

  • @lijojohn3901
    @lijojohn39015 жыл бұрын

    hai guys good videos ,i am from india and also maid a small table by using by resign.but i dont kno the product name of the polish material .can u please tell the name of the product ,

  • @thomasbreslin7759
    @thomasbreslin7759 Жыл бұрын

    Did this have the UTC on it or bare flood coat

  • @jikonic8607
    @jikonic86076 жыл бұрын

    How long is it recommended to wait after the 2nd coat is applied before sanding and polishing. I can feel how, for lack of better term, "mushy" it is after it dries. Is that ok to sand right away?

  • @daysdesigns

    @daysdesigns

    5 жыл бұрын

    Need to wait a week. (5-7 days)

  • @damiruhoda3255
    @damiruhoda32554 жыл бұрын

    two angle cameras - nice touch

  • @lenorakaywaide48
    @lenorakaywaide486 жыл бұрын

    Hi, Mike, I love this technique of Epoxy...going to order soon. but after counter tops are finished, Do you have to clean and polish like this? if so How soon after it is complete? or is it ONLY when you have scratches and/or cuts in epoxy.

  • @lenorakaywaide48

    @lenorakaywaide48

    6 жыл бұрын

    OR do you just polish with the Liquid Smooth periodically.? just soap and water clean for normal use counter?

  • @brianlister6036
    @brianlister60365 жыл бұрын

    if I don't have a polisher can the compound be used and applied by hand? Will that be enough or is a polisher a must?

  • @ronherkey148

    @ronherkey148

    4 ай бұрын

    You'll need a polisher..

  • @JVan8313
    @JVan83136 жыл бұрын

    I have dealt with the pain of the spray of Meguiars. However, I don’t want to have to buy a new buffer after buying the one you used in your previous video. So, will this new polish compound work fine with the old version of polisher?

  • @daysdesigns

    @daysdesigns

    6 жыл бұрын

    The thing is they are two very different machines, one being the regular buffer/polisher that just spins, and the other is the dual action random orbit buffer/polisher. The first one tends to be much more aggressive.

  • @emilywisler6203
    @emilywisler62035 жыл бұрын

    Is this a process that creates a lot of dust? Am wondering what fallout I would have if I sanded and polished in place in my kitchen. Also is there a need for a respirator mask?

  • @jillelaine5499

    @jillelaine5499

    5 жыл бұрын

    If you watch the video all your questions are addressed!

  • @tinamariemalinowski2745
    @tinamariemalinowski27455 жыл бұрын

    Mike what kind of polishing compound can I get at Lowes or any other store ty

  • @Calkidd

    @Calkidd

    5 жыл бұрын

    I use 3D products. You'll need to go to a local automotive detailing store to get what you need not Lowes or Home Depot.

  • @marieruffin3977
    @marieruffin39774 жыл бұрын

    Do you always have to sand ,& polish st finishing,? Can a second coat of epoxy be enough ic you like the wet look?

  • @pfmcgrew

    @pfmcgrew

    4 жыл бұрын

    Yep. This is all optional and only if you want a honed or polished finish

  • @drewjohnson4673
    @drewjohnson46735 жыл бұрын

    what are the additional steps/products for a higher sheen on an epoxy table? Thanks

  • @chrisburnsed6349

    @chrisburnsed6349

    4 жыл бұрын

    You can’t. I’ve been in this industry 30 years. It will never look like it did brand new. That crystal clear glass look cannot be achieved once gone, this is the downside to epoxy. You can make it look nice but never like when new glass look. These Guys will never tell you that when selling you on it,

  • @drewjohnson4673

    @drewjohnson4673

    4 жыл бұрын

    Chris Burnsed Thanks

  • @VannessThao1988
    @VannessThao19883 жыл бұрын

    Hi there. Is epoxy required to use the right compound to buff and polish or can be use with any compound like car buffing compound and Polish. ?

  • @mountdoomee

    @mountdoomee

    8 ай бұрын

    I heard car polish works good. I haven't tried myself yet

  • @javajay56
    @javajay565 жыл бұрын

    How long does the finished piece have to cure before it can endure regular daily use

  • @pfmcgrew

    @pfmcgrew

    4 жыл бұрын

    30 days.

  • @lawmom220
    @lawmom2205 жыл бұрын

    What if you want the shine? I understand that for future use that it might be useful to do when there are scratches but in the beginning I want it to shine and get rid of the imperfections. Is that possible?

  • @adriancoronado8612

    @adriancoronado8612

    5 жыл бұрын

    Dont go to such a low grit. Start around 600 or 800 and build up to 3000 - 5000. Presta compounds would work. Make sure compound isn't to abrasive. Finish off with glaze. Should give you the mirror finish and remove minor nibs and imperfections.

  • @desigerz7364
    @desigerz73643 жыл бұрын

    Can I do the same with floor? And what if I covered my surface with urethane before??? Thanks

  • @StoneCoatCountertops

    @StoneCoatCountertops

    3 жыл бұрын

    Thanks for watching Zahra! Check out our flooring tutorial to get the best information to do your project! -Nathan studio.kzread.infops1usG4f5ik/edit

  • @suspensefulness
    @suspensefulness Жыл бұрын

    are u sanding a top coat or the epoxy itself

  • @bbotonthejob
    @bbotonthejob4 жыл бұрын

    Hi I have just done a countertop and have an uneven surface, I was going to sand it with 220 sandpaper and then give a finish top coat, will that give me a gloss finish or will it look flat?

  • @Affordablebath_remodel

    @Affordablebath_remodel

    4 жыл бұрын

    it will be shiny after the top coat.

  • @tyriqueabraham6219
    @tyriqueabraham62192 жыл бұрын

    So I poured stone coat for the first time on Saturday, but unfortunately I left my backsplash pieces outside. It dried with a haze on it. My question is how soon after pouring can I sand and polish?

  • @StoneCoatCountertops

    @StoneCoatCountertops

    2 жыл бұрын

    We usually suggest about 7 days for sanding and polishing. If you are doing another coat you are good to sand after 24 hours and apply another coat. You Got This!

  • @ambermcdanel1070
    @ambermcdanel10702 жыл бұрын

    When I dry sanded, little white speckles formed out of the dust being created. Looks like the sander heated them into the finish. I had to wet sand with 80 grit to removed them, and ended up having to wet sand the whole project. I'll never dry sand again.

  • @66mustangguymoreau36
    @66mustangguymoreau363 жыл бұрын

    Is it possible to use rotary polisher with wool/foam pads and automotive compounds

  • @ronherkey148

    @ronherkey148

    4 ай бұрын

    Yes

  • @JB-ct7bi
    @JB-ct7bi5 жыл бұрын

    Help me out please! I did my countertops a few months ago. I love them! I would like to just knock the shine off. They are very smooth with no scratches. I don't feel like they are thick enough to sand them so many times as you did here, and I am worried about swirl marks. Can I just hand sand the top of them? If no to hand sanding how do I avoid the swirls? I guess I also don't understand why you have to start low and work your way up with grit.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Great question JB! We started at the lowest grit in this video to show a worst case scenario, you can start at 500 grit and work your way up from there on a newer epoxy surface, give us a call and we would love to help! (541)450-1976

  • @jovancaballero9833
    @jovancaballero98339 ай бұрын

    Is this polishing sanding method done on the top coat product or is this just done straight after the epoxy cures. I am confused if this was sanded and polished after a the use of the top coat product

  • @ronherkey148

    @ronherkey148

    4 ай бұрын

    This is done before the ultimate top coat. You cant sand the UTC.

  • @charleshetrick3152
    @charleshetrick31525 жыл бұрын

    3M makes a 5000 grit pad, just an FYI. Also when connecting a vacuum system the Oneida Dust Deputy is awesome for saving money on vacuum bags and maintaining suction. When I’ve sanded floors in occupied homes and so forth, customers have been astounded at how little dust escapes the system.

  • @michelemcneil4658

    @michelemcneil4658

    5 жыл бұрын

    charles hetrick Was

  • @marylouniebrugge9174
    @marylouniebrugge91744 жыл бұрын

    Why did the side on the table look wet?

  • @jikonic8607
    @jikonic86076 жыл бұрын

    I was asked a question about repairs. If, in the worst case scenario, a big gouge or large and deep scratch is made in the clear coat. How easy would it be to repair that? Sand everything much like you do here and put another clear coat on?

  • @thomaswright8067

    @thomaswright8067

    6 жыл бұрын

    StoneCoatCountertops would you need to sand and polish the entire piece or just the bad spot?

  • @joepro6785

    @joepro6785

    5 жыл бұрын

    J Ikonic just the sanded spot

  • @rynehastings9933

    @rynehastings9933

    8 ай бұрын

    This just happened to me and I filled the spot with two layers 24 hours apart. Waiting on the second layer to finish drying to see how smooth it bonded together then will sand/polish.

  • @laurav2735
    @laurav27352 жыл бұрын

    All that buffing with so many pads…is this taking off the UTC and some of the clear coat?

  • @daysdesigns
    @daysdesigns6 жыл бұрын

    So now you don't use the interference pad, correct? And no water with either disc type?

  • @daysdesigns

    @daysdesigns

    6 жыл бұрын

    I've always had a problem getting rid of the tiny curly ques ... I certainly hope this will help solve that issue. What is your polishing compound you now sell? Is it some sort of a rubbing compound? Do you list what's in the product on the bottles?

  • @daysdesigns

    @daysdesigns

    6 жыл бұрын

    I still found that the Abralone discs worked better with a bit of water. Just my results at least.

  • @newchapterart8929
    @newchapterart89295 жыл бұрын

    Are small surface scratches, (thin web like scratches that can only be seen at an angle in the light), normal?

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Great question and thank you for watching New Chapter Art! Stone Coat Countertop epoxy is much more scratch resistant than other epoxies, but it can scratch. Scratches usually happen from objects that are rough or sharp, or from new epoxy finishes. Small scratches are easily polished out. Usually, you can take a rag and some compound and polish out a scratch quickly. If the ratio when you mixed was correct and the temperature was not below 65 degrees fahrenhiet, you should have a top with normal durability. Please feel free to contact us anytime with questions or for project support. (541)450-1976

  • @daysdesigns

    @daysdesigns

    5 жыл бұрын

    You may be referring to the tiny little scratches that you will get from sanding? Often times those are difficult to completely get rid of unless you are some sort of polishing professional like a couple of people on here claim to be. They say they can get it back to mirror finish... and I say that's just not going to happen. (as do the Stone Coat guys) I think the little tiny scratches that I'm speaking of are from the sanding process and unless you are really good and know what to look for those might be there to stay... but they are very hard to see by the normal person... if they aren't trying to find them they often don't see them at all.

  • @newchapterart8929

    @newchapterart8929

    5 жыл бұрын

    @@daysdesigns They showed up after wiping the surface with a wet paper towel. But the can only be seen at a angle. Problem is it is an art piece and before I can try to sell it, I need to make sure that it is normal. I wouldn't want to sell something for it to get worse

  • @daysdesigns

    @daysdesigns

    5 жыл бұрын

    Is it only resin or is there acrylic paint as well? Because I know paint likes to do that a lot as it dries.

  • @newchapterart8929

    @newchapterart8929

    5 жыл бұрын

    Resin is over the painting

  • @dannkaady-maras2107
    @dannkaady-maras21075 жыл бұрын

    i use this compound and spray... The clean smell is the first thing the client notices.. they think i cleaned their home..lol

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    That is wonderful feedback D'Ann Kaady-Maras thank you so much for sharing this with us!

  • @davido8941
    @davido89415 жыл бұрын

    Did I miss the type of polishing compound? Would like to know one for water clear finish.

  • @Calkidd

    @Calkidd

    5 жыл бұрын

    Its similar to polishing your car. He used a compound and mistakenly called it a polish. Once you've gone over with your compound to get the sanding scratches out then you can go with a polish. I used 3D products and I would suggest the HD polish or HD Speed as a final polish.

  • @craigaycock505
    @craigaycock5056 жыл бұрын

    What if you want a high gloss finish on a live edge table? Not a matte finish

  • @BG-dv5mm

    @BG-dv5mm

    5 жыл бұрын

    From what I am seeing and reading it is almost impossible unless you can keep all imperfections out during the final flood coat.

  • @karenpresley7101
    @karenpresley71016 жыл бұрын

    Very nice finish. But can you bring it up to a high shine if you wanted to? My friends laugh saying I'm like an old crow that's attracted to shiny objects. lol

  • @BG-dv5mm

    @BG-dv5mm

    5 жыл бұрын

    Karen I feel the same way I pour over natural wood and want the shine back as close as possible, but cannot get the (fish scale) scratches as they were referred to in earlier posts out of my finishes. I have friends come over and think i'm just too picky, but a table as expensive as these I want them as close to perfect as can be. I'm trying to start a business but if I cannot get a finish without sanding scratches in it soon I'll have to go another direction, I literally have thousands invested in this venture and will try a few more times then I'm going to have to cut my losses.

  • @lorismith4106
    @lorismith41066 жыл бұрын

    I know this is for countertops, but I am doing resin paintings and was wondering if you can polish them the same way? I found a hair that I missed in my top coat of resin and would like to sand and buff without having to do another coat. Is this possible?

  • @StoneCoatCountertops

    @StoneCoatCountertops

    6 жыл бұрын

    The Art Coat can be polished just like the Stone Coat Countertop epoxy is in this video, great question! Let us know if you have any further, we would love to help you out over the phone. 541-450-1976

  • @lorismith4106

    @lorismith4106

    6 жыл бұрын

    Stone Coat Countertops, would I start with a lot higher sand paper and buff with the same stuff. I’ve watched you on Artists Till Death and have ordered your art coat resin. I’m anxious to try it.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    6 жыл бұрын

    Great question Lori! We do sell an assortment pack that will go up to 4000-grit. We finish polish with our polishing compound found here: www.stonecoatcountertops.com/product-page/polishing-cleaning The sheen is not quite as glossy as the original, but looks more like natural stone. Here is a video link of how we sand and polish: kzread.info/dash/bejne/m3qk3MavgMS3nJO4.htmlhanks, and feel free to contact us anytime for free project support. (541)450-1976

  • @lorismith4106

    @lorismith4106

    6 жыл бұрын

    Stone Coat Countertops, I ordered those things this week. Thank you!

  • @StoneCoatCountertops

    @StoneCoatCountertops

    6 жыл бұрын

    Wonderful Lori! We can't wait to see your amazing projects!

  • @amberlamere730
    @amberlamere7306 жыл бұрын

    Awesome!! Love this!! Do you recommend always starting with a lower grit, less than the finishing grit? Or, on a freshly finalized piece, can you just do a 3000 or 4000 grit sanding and polish?

  • @ericsnell9504

    @ericsnell9504

    6 жыл бұрын

    Amber LaMere My question exactly! If I'm happy with the smoothness of my top coat, and I just want to barely nudge the sheen down to realistic looking polished granite, is there another reason to progress through all those grits?

  • @Countdracula6

    @Countdracula6

    6 жыл бұрын

    Around 4:00 Mike talks about not having to start at 220, you can do whatever you want depending on what you are trying to remove.

  • @daysdesigns

    @daysdesigns

    6 жыл бұрын

    It actually IS different than a car's finish though... so it will react differently. Like he said, it doesn't work nearly as well if you just start at 3000 or 4000 grit then polish, it's not nearly as good a finish. I tried it yesterday actually... and I would have to agree with them. May take longer... but the result is much better in the end.

  • @daysdesigns

    @daysdesigns

    6 жыл бұрын

    Can you ever get it back to a 'MIRROR FINISH' though? I'm not finding that possible with epoxy myself.

  • @dougdekruyter

    @dougdekruyter

    5 жыл бұрын

    @Gary O i did a counter 2 days ago, im going to try your method, wet sand with 3,000 then 4,000 use a finish pad with polish last.

  • @MohammedAli-sn5gd
    @MohammedAli-sn5gd5 жыл бұрын

    Why do we need to sand sooo many times

  • @Xandrosi
    @Xandrosi5 жыл бұрын

    For this final polish, can you please confirm that you're starting off with a piece that has gone through final flooding and torching (i.e., where you stop in many of your videos)?

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Great question Xandrosi! This piece did have a final flood coat on it before we polished. We like to wait 5-7 days with our project in room temperature before we polish. We have tested every sanding disc we can get our hands on, and we have had the best luck with Merka gold and Aberlon discs. We do sell an assortment pack that will go up to 4000-grit. We finish polish with our polishing compound found here:www.stonecoatcountertops.com/product-page/polishing-cleaning The sheen is not quite as glossy as the original, but looks more like natural stone. Here is a video link of how we sand and polish: kzread.info/dash/bejne/m3qk3MavgMS3nJO4.htmlhanks, and feel free to contact us anytime for free project support. (541)450-1976 www.stonecoatcountertops.com/product-page/sanding-assortment-pack

  • @Xandrosi

    @Xandrosi

    5 жыл бұрын

    Stone Coat Countertops, thank you. I need to try this.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Awesome! Let us know if you have any questions to help get you started.

  • @Sawmods
    @Sawmods5 жыл бұрын

    What do you recommend for the substrate? MDF ??

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    MDF is a great place to start Corey Cripps! Its easy to work with, cost effective, and easily found.

  • @MohammedAli-sn5gd
    @MohammedAli-sn5gd5 жыл бұрын

    Can we do it on glass epoxy projects

  • @shahzaibyounas8361
    @shahzaibyounas83613 жыл бұрын

    tell me epoxy polishing cream name

  • @StoneCoatCountertops

    @StoneCoatCountertops

    3 жыл бұрын

    Thanks for watching Shahzaib! Here is a link to our Polishing and Cleaning kit! -Nathan www.stonecoatcountertops.com/polishing-cleaning-epoxy-kit/

  • @cosmodibono3292
    @cosmodibono32926 жыл бұрын

    just right I love it to become a contractor?

  • @dianazweidinger2070
    @dianazweidinger20703 жыл бұрын

    Would this sanding and polishing be done after the Ultimate Top Coat is applied? So far my understanding is that take the following steps: 1) Cut and sand the counter top out of MDF (that is what we are using for our outdoor bar). 2) Applying bonding primer and then sand with 220 grit 3) Apply epoxy undercoat then sand with 220 grit 4) Apply 1st layer of epoxy with color formula, dry overnight and sand with 220 grit 5) Apply clear epoxy layer, dry overnight and sand with 220 grit 6) Apply Ultimate Top Coat, dry overnight 7) Wait 5-7 days for epoxy to harden 8) Use sanding kit to sand for each supplied grit in your kit in increasing grits until done going side to side and then up and down and the edges 9) Apply the polish and let that dry 10) Apply liquid smooth product and then you are done!

  • @jovancaballero9833

    @jovancaballero9833

    9 ай бұрын

    Aww man I really need them to reply to this I have the same questions

  • @rynehastings9933

    @rynehastings9933

    8 ай бұрын

    Minus the polishing steps, this is what I did based on what they said over a few of their videos. Worked great. Now I am nervous about messing up the finish when polishing it all.

  • @melisaenes5904
    @melisaenes59045 жыл бұрын

    Hello, I really liked your videos and thank you for all nice tips about epoxy. I am designing accesorizes and decoration object which are also need sanding and polishing. However, since I live in Turkey I am not able to order your products. Epoxy resin is a new material for me to work with and I am in trouble with all the scratches of sanding. I have tried to make a clear coat after sanding but I am not always working with the flat objects. So ı need some other product to remove the scratches and make my accecorizes shiny. We don't have polishing compounder specially for resin in Turkey but I really appreciate if you can suggest me something similar that I can use. Sorry for the loooooong message. I will really look forward to your reply :))

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Great question melisa enes! Meguiar’s 105 is a polish that we like that may be available in your country! Feel free to call us at 541-450-1976 for project support!

  • @melisaenes5904

    @melisaenes5904

    5 жыл бұрын

    Stone Coat Countertops thank you so much for your reply. I will resesrch this product.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Awesome! Let us know if you have any further questions.

  • @nanagyasinana1386

    @nanagyasinana1386

    5 жыл бұрын

    @@StoneCoatCountertopsI am in Ghana and most of product are not available for the polishing of the finial work... Pls is there any other Universal polishing product which I can easily find in my country to polish my works pls.

  • @ZEPR0FESS0RR
    @ZEPR0FESS0RR6 жыл бұрын

    Do you do this after epoxy pours to achieve the end result? (A really nice glass shine like all your videos end) Or is this more of a refinishing process for later down the road?

  • @daysdesigns

    @daysdesigns

    5 жыл бұрын

    It's not a mandatory thing... but it does give them a more realistic look because it's too shiny if you don't.

  • @Optimization_Coach
    @Optimization_Coach4 жыл бұрын

    Just had my counter tops done here in SW Florida and I have to tell you that the counters are soft and VERY prone to scratches. While it looks great, I would have never done the job if I would have known I would have to sand and buff the counters multiple times a year!! They told me that their Sherwin Williams product was the best! Total BS. I am also hearing that there is a hardener coat available to apply at the end of the job from another contractor. Maybe you folks would like to ask about that!

  • @leilanifeedingtime4992

    @leilanifeedingtime4992

    4 жыл бұрын

    ETI makes their own epoxy and is tough stuff when mixed right, called Envirotex Lite. Not enough hardener and the job comes out soft like your counters. You can roll out a thin coat of epoxy to seal your counter.

  • @pattylevasseur2645
    @pattylevasseur26456 жыл бұрын

    hey i got a question..you know how ppl want updated fantastic looking bathrooms with tiles and stone? have you guys ever thought of trying it on a cast iron claw foot tub??? im wondering if it could handle the long periods of heat and scrubbing? maybe go to a yrd sale or a farm or junk yrd and just for kicks experiement on 1.. i bet it would be unreal gorgeous ;];];];] i was scrolling through a swap sell guide in my area and they have 2 good condition claw foot tubs for free you haul...and then under that ad someone was selling field stone..... thats when i came up with the idea for you guys to try out;];];];] what do you think???

  • @markelkins7622

    @markelkins7622

    5 жыл бұрын

    Hey Mike hears A pointer you may or may not have thought Of on and install if you have a really tight fitting counter Top it's a great idea to tape a piece of aluminum flashing to the wall then when you come down with your top And its squeezing in They're really tight You Won't dig up your dry wall and when you're done you just simply pull the flashing out it works great I'm done it many times on other kinds of Tops

  • @Draconix1978
    @Draconix19785 жыл бұрын

    Your tool page has no information on it. Just thought I would give you a heads up just in case the site is messed up.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Thank you for bringing this to our attention Allen! Are you viewing the page on a mobile device or desktop? Call or write us and we would be more than happy to answer any questions you have and can provide you with links to the tools we use. (541)450-1976

  • @Draconix1978

    @Draconix1978

    5 жыл бұрын

    @@StoneCoatCountertops Just link me here and I will check them out. :)

  • @Draconix1978

    @Draconix1978

    5 жыл бұрын

    @@StoneCoatCountertops Ok I figured out the issue. The links do not display on Google Chrome but they will on Edge (Explorer). Really need to get a web designer that reaches all browsers. Not just Edge (Explorer).

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    We appreciate you getting back to us regarding the Amazon Tool Links, thank you Allen, we will look into this.

  • @mrniusi11
    @mrniusi112 жыл бұрын

    FYI, there is no 240 anymore. 220 to 320 in the kit they sell via amazon.

  • @Optimization_Coach
    @Optimization_Coach4 жыл бұрын

    Sadly the light scratches on my epoxy counters have been accumulating at a rapid pace with light activity. Sanding and refinishing isn't practical in a home environment.

  • @pfmcgrew

    @pfmcgrew

    4 жыл бұрын

    I've lived in full-on construction many times--not ideal, but very doable. This little bit of sanding is very easy to do with just a little bit of prep and clean up. I wouldn't beat an eye at this.

  • @cookienibz2578
    @cookienibz25785 жыл бұрын

    This may be a stupid a question, but why bother with the 600 grit, if you have to start back at 500 grit with the other paper? Could you just do the 220, 500, 1000,2000,3000,4000? I must be missing something, lol. Apologies & Thanks in advance.

  • @StoneCoatCountertops

    @StoneCoatCountertops

    5 жыл бұрын

    Great question Cookie Nibz, we started back at 500 to erase any marks left by the other sanding discs!

  • @mikecolendusa
    @mikecolendusa6 жыл бұрын

    When is this desired? Why not sand and add another clear coat ?

  • @daysdesigns

    @daysdesigns

    5 жыл бұрын

    The whole point was to drop the mirror finish sheen you get from pouring alone. Looks more realistic if it's knocked down a bit.

  • @nathanguest9723
    @nathanguest97233 жыл бұрын

    6 minutes 39 seconds made me chuckle

Келесі