So why not just leave the oil pump in place and just disconnect the cable?

When I look up oil block off kit for trailblazer 250 nothing comes up is there may be a part number you have that I can look it up?

Watched your vid you did a year ago on oil mix pump on cycle engine. Replacing with a block plate. Isn't the throttle attached to that pump. If so, where do you attach it after pump is removed. I don't have it out yet but looks like it's on the oil mix pump. Can you advise me.

Do you have a link to the kit you used in this video? Thanks

@hillsidepowersportrepair8863

Жыл бұрын

www.ebay.com/itm/252977786537?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=ZsCtC8T2Rv2&sssrc=2349624&ssuid=AkYs3VdFQMy&var=&widget_ver=artemis&media=COPY

Cool so there's no need to pull the gear from inside that crankcase that drives the pump?

@hillsidepowersportrepair8863

10 ай бұрын

Depends on the application, but usually no

@gabrielalvarez9570

10 ай бұрын

I saw some videos where they did but personally i don't see the need to, it would just be free spinning in there 🤷🏾‍♂️ Thank You! 🙏

That's what I did undid the cable 🚡

@mr.uhleven

4 ай бұрын

you didn’t have to use the block off kit correct ? another question.. will my trailblazer be okay if i just do premix and leave the pump on the bike ?

@AnthonyMartinez-bj7xi

29 күн бұрын

Yes i run it whir the pump still on it

All you have to do is disconnect the inlet line and run pre mix????

why not let oil tank run low and dont touch a thing start pre mixing ?

@hillsidepowersportrepair8863

4 ай бұрын

The 2 stroke oil lubricates that little pump. It had been known to lock up without oil

Will that same play work for a trall boss 250

@user-bj9uj2cg7c

9 ай бұрын

Plate

@hillsidepowersportrepair8863

9 ай бұрын

I believe so

Do you have a link for the cast jet cleaning tools? Thanks for the video.

@hillsidepowersportrepair8863

Жыл бұрын

amzn.to/3PGVXJC Have fun!