Polaris Sportsman 600 / 700 2002-2006 AC/DC upgrade kit for Stator + CDI Installation instruction
Автокөліктер мен көлік құралдары
There was a run of Sportsman 600's and 700's from 2002 to mid 2004 that were plagued with electrical problems and failure of the ignition system was a matter of when, not if.
The AC powered ignition was the Achilles' Heel of an otherwise stone reliable ATV. Unfortunately, the price to replace with an upgraded Polaris kit was well over $500 and it was your only option.
With our new Ignition Fix Kit, we convert your problematic 2002/2003/2004 Sportsman 600/700 AC ignition to a much more reliable DC ignition at less than half of the price of the Polaris upgrade kit.
Our upgrade kit consists of a new CDI and a remote coil, all required wiring, and installation instructions that allow pretty much anyone to get the job done without professional help. This kit uses the heavier windings of the lighting coil to power the ignition... the problematic section of the stator is no longer used, and the new secondary ignition coil is isolated from the CDI in contrast to the integral coil/CDI that comes from the factory. The result is more reliability, better spark, and easier diagnosis should you have another problem in the future.
Less money ! Less time ! More bang for your bucks !
Пікірлер: 32
When you pull your plug wire up , attach a bright green string , then you can pull the plug wire right back down in the same spot
@Rmstatorinc
5 жыл бұрын
Great tip!
Great video! I added the RM Stator to my 2002 700 Polaris. Everything seems to function good and the machine runs good. The problem is that my "Stator" warning continues to flash on the instrument panel. It also shows upwards of 27 volts. Is this normal? Do I need to do anything additional? Thank you in advance!
thanks good video
@Rmstatorinc
4 жыл бұрын
Thanks!
Does this fix the 1 spark then stop per key turn problem?
I have a 16 wire plug going to my unit and the plug wires are coming out of my coil. Will this upgrade work?
I have a 2007 Polaris sportsman 700 efi will this kit fit? quad is only running on one cylinder?
even with this ur stator still,has to be good right??
My stator light keeps flashing on my digital read out how do I get rid of that? Please respond
Hey thank you so much.. Awesome video.. I was wondering if you have to take out the stator as well?
@Rmstatorinc
4 жыл бұрын
No, with this ignition system there is no need to remove the stator.
The magnets came loose on the flywheel and I was wondering if I can just leave them off and install this? I great info video
@garonburwell9008
4 жыл бұрын
how would that work? i can't imagine any ignition working without a working stator of any kind. the ducati stator and flywheel are no longer available. this kit is designed to work with those NLA parts. i think this might not be an option to repair your bike. the polaris($) kit comes with everything you need. if this is still over your head you might be better off to find someone who knows what they're doing, that you can trust, to help you.
Does this work for carb models and EFI alike? Why doesn't it come with the stator like the OEM kit? Is the Polaris OEM kit for people who have already experienced a failure, while the RMS kit is for people who want to do preventative maintenance?
@Rmstatorinc
4 жыл бұрын
No it will only work with carb models, not EFI. It doesn't come with the stator because the most common part of the stator to fail is the source coil. Our DC conversion CDI box bypasses the source coil, so you can keep using your old stator.
@jeromeallegrezza7561
4 жыл бұрын
So if your stator is bad this will not work????
@jeromeallegrezza7561
4 жыл бұрын
@@Rmstatorinc so if stator is bad this will not work??
I have an '04 Sportsman 700 and I can't figure out where the Trigger Plug goes.
@Rmstatorinc
4 жыл бұрын
If it uses the Ducati ignition system, it is a 2-wire plug up front, shown in the video. It has a Red and Black wire.
My Mechanic that is fixing doesn't have internet is there a pdf version that i can print and take to him please
@Rmstatorinc
4 жыл бұрын
Not at this time, but we are working on new printed instructions for many products.
what is the part number for this new kit
@Rmstatorinc
4 жыл бұрын
RM22957
It had any for Polaris 330 of 2003?
@Rmstatorinc
4 жыл бұрын
No this system will not work on a 330.
Hi mate, how are you doing? Grettings from Brazil. I hope you can help me out on this trobleshooting. Let me get strait to the point. I just got a POLARES 330 CC, 2003 and I realized that my CDI box is not working, THERE IS NO SPARK GOING OUT FROM THE CDI BOX, something bad might happened. I did some researches on the internet, youtube and i notice the the best thing to do is basiclly replace it, get a brand new one. However, to get it down here is so expensive, BEEN TRYING eBAY OR SO TO SEE WHAT I CAN GET. But before of all that I´d like to try a MOTOBIKE CDI BOX one. Is there any possibilite to adpat a motobike one? What are you recommend? Have you ever try it? PLEASE HELP ME. I aprecciate it. Thanks so much. Excuse my inglish is bit rusty
@Rmstatorinc
4 жыл бұрын
Sorry I'm not familiar with a motobike CDI box. It may be possible to adapt it, but I couldn't help much.
For the do-it-yourself crowd, I would recommend that you use either a heat gun for the shrink wrap or liquid tape. Using an open flame around any motor vehicle or gas source can have catastrophic results! Great product.
@NytronX
4 жыл бұрын
Yep, Harbor Freight has a heatgun for $5.99 after coupon. hfqpdb.com for coupons
@Rmstatorinc
4 жыл бұрын
Good advice!
Why would you need to do this?