Polaris RZR XP4 1000 High Lifter on 42's and 6" Portals
Автокөліктер мен көлік құралдары
This is a video of the progression of my Polaris RZR XP4 1000 High Lifter. I started out with stock suspension with 33" BKT on 20" wheels then I upgraded to 3" Super ATV bracket lift, 1.5" forward A-arms and 37" Motorhavok on 24" Fuel Kompressor wheels. I ran this setup for eight month then for the New Years Eve ride at Sabine ATV Park I broke a radius rod, bent a trailing arm, broke a shock , axle shaft and the front output shaft in the transmission. Well now this gave me the opportunity to upgrade again so I rebuilt the transmission, installed Super ATV high clearance radius rods, Super ATV arched trailing arms, Super ATV GDP 6" portals 45% reduction and 42" Motohavok tires. Thanks for watching #sendingitcajunstyle
#SuperATVhighclearanceradiusrods #SuperATVarchedtrailingarms #SuperATVGDP6"portals45%reduction #42"Motohavoktires.
Пікірлер: 51
Man....ya'll boys off da chain!!!! Super Nice!
Love when a rig is used!
Them 42’s is🔥🔥🔥
@sendingitcajunstyle1020
3 жыл бұрын
thanks for watching
Love the machine man
@sendingitcajunstyle1020
3 жыл бұрын
Thanks man!!!
@keltonbrixeytheoff-roadout1586
3 жыл бұрын
Your welcome
Great job and video !!! One with the transmission would have been a good video to. What you could do is take that footage and slow it back down. And do a voice over as you going through it. Id love to see that. Thats one of the fears I have out of my RZR on 37's
🔥🔥🔥🔥
Looks really good, I've been thinking about going to 42's.
@sendingitcajunstyle1020
3 жыл бұрын
Thanks for watching. I'm really satisfied with the setup of 6" portals 45% reduction and the 42" Havoks. Last weekend was the first ride I made with the new setup and it worked great but I took it easy. We have another ride planed for May 7-8 at Sabine I'm going to give it hell and see what it can handle!!!!
@ClaytonHenderson521
3 жыл бұрын
@@sendingitcajunstyle1020 yeah I have the same exact setup just on 40” bkt’s. But I have an extra 55%GR in low and it’s an absolute tractor. Lol
@sendingitcajunstyle1020
3 жыл бұрын
@@ClaytonHenderson521 High Lifter ?
@ClaytonHenderson521
3 жыл бұрын
@@sendingitcajunstyle1020 yes sir, it is.
@juniorgarcia4246
3 жыл бұрын
To clear 42” tires do you need forwards A arms
I have a similar story 😆👍
@sendingitcajunstyle1020
3 жыл бұрын
I’ll check it out. Thanks for watching!!!
What clutch setup are u running, I have the same setup basically with 8" portals. Been have power problems in high gear lately
What kind of speeds do you get with the 6inch portals
Hey guys i really like this build!!!! I have a rzr 1000 4 and looking to base your build to my machine. I was seeing if you could hook me up with part used for suspension and portal set up. And what gear ratio portal and do you have any engine mods. How does It handle for power with those big wheels?
Have u had any trouble with ur bike cutting off after idling or Just crawling around for a while
👍
What's yiur top speed on that setup
Hey buddy. I'm try to due my front. I'm have 2010 .
Crazy. What ya do for money to dump into these toys?
Were you able to turn the 42s with the 45% reduction? Have a rzr xp1000 I'm going with 42" bkt and 30% portals along with my 27% trans reduction.
@sendingitcajunstyle1020
Жыл бұрын
I had no problems turning the 42s. Most of the time I was running in high. I have a friend that is running 42" Havoc with 30% portals on a maverick X3 and it runs like it would still be stock. Thanks for watching
Buggy looks great. You still happy with this setup? What is the height at the roof now? Thanks B
@sendingitcajunstyle1020
2 жыл бұрын
Yes, I’m very happy with the setup. The roof height is around 9ft. Thanks for watching
How much money did you put in after the repair
@sendingitcajunstyle1020
2 жыл бұрын
Around 10k. Thanks for watching.
What bolt pattern are the rims
@sendingitcajunstyle1020
3 жыл бұрын
It’s 4x156 which is a standard Polaris lug pattern. Thanks for watching!!!
@motorfntrash4254
3 жыл бұрын
@@sendingitcajunstyle1020 and for can am x3 what lug nut
@sendingitcajunstyle1020
3 жыл бұрын
Can-am x3 is 4x137 lug pattern with a 12x1.5mm lug nut
0:57 how wide is that trailer? Thanks
@sendingitcajunstyle1020
Жыл бұрын
84”
@Brittvanegas
Жыл бұрын
How wide is the sxs ? Thanks
@sendingitcajunstyle1020
Жыл бұрын
@@Brittvanegas 74”
Did you trade this in? To Ogden powersports?
@sendingitcajunstyle1020
2 жыл бұрын
No. They bought it from me. I had it for sale on Facebook marketplace.
@laredrocket7813
2 жыл бұрын
Sweet seen it for sale and instantly recognize it! Why did you get rid of it if you don’t mind me asking?
@sendingitcajunstyle1020
2 жыл бұрын
@@laredrocket7813 lm going to build a range crew northstar
Does it fit in the garage? Lol
@sendingitcajunstyle1020
2 жыл бұрын
Yes but only has a couple inches of clearance. My garage door is 9ft tall
looks good except the tires.. that skinny Havoc just does not look good. That`s my opinion we all have our own.
@sendingitcajunstyle1020
3 жыл бұрын
Yep everyone have a opinion. I went with the skinny Havoks because they are a lot lighter and sometime we ride really tight trails. Narrow trails and a 4-seater don't vibe well. thanks for watching!!
Why the little skinny ass cookie cutters? Tires and wheels need to be about 4” wider