Polaris RZR Prop Shaft Driveline U Joint Removal And Replacement From Home DIY
Автокөліктер мен көлік құралдары
Get your Dana Spicer U-Joints Here venturestruckparts.com/produc...
Tools Needed
-Vise
-Two Hammers (one being ball point)
-3/8 Wrench
-Flat Head Screwdriver
-Paint Pen / Sharpie
-Rag
Ventures Truck Parts shows you how to replace your worn our U-Joint in your Polaris RZR using the tools you have at home.
Пікірлер: 21
Not one needle lost.. impressive
Thanks for video! I have never changed u joints before and this video helped immensely!
Great video!
This is a really good video. Thank you.
Well done video, thank you
What was the Dana Speicer part number for the u joints?
I recently pulled n rebuilt my front diff (2013 ranger xp 900) Now I have a bad vibration around 20-25 mph. I didnt notice the vibration before the rebuild. The prop shaft, rear u-joint and yoke have a bunch of play so i was thinking thats the cause of the vibration. Now Im wondering if this is a phasing issue.... Not sure if I marked the splines but figured it would only go in one way, due to the way the splines are cut. Can it be slid on out of phase??
Great video
Thankyou for your video..
The video is great. Why would not just put the grease fitting in first?
@krunk9644
Ай бұрын
was about to type the same thing!
Great awsome video the only thing that would have made it the video of the year for me is that joint part number cause my parts store don’t know how to get the rite ones but great video again on the install
Do you have a part number for that yoke the super atv website says it is not for my machine I have a 2021 and looks like the same shaft
Excellent tutorial.
It will only go together one way
Why would you have to mark the shaft and splines before pulling them apart when they won’t go back in any other way? A few videos have said the same thing.
@greaselem
2 жыл бұрын
i recently pulled n rebuilt my front diff (2013 ranger xp 900) Now I have a bad vibration around 20-25 mph. I didnt notice the vibration before the rebuild. The prop shaft rear u-joint and yoke have a bunch of play so i was thinking thats the cause of the vibration. Now Im wondering if this is a phasing issue.... Not sure if I marked the splines but figured it would only go in one way. Do the way the splines are cut. Can it be slid on out of phase??
@CasperRc81
Ай бұрын
the u joints have to be phased correctly, meaning if you squinted your eye and looked down the shaft complete one end to the other the ujoint/shaft ears all need to be lined up exactly
Part number please.
@VenturesTruckParts
3 ай бұрын
Here is a link. venturestruckparts.com/product-category/polaris-u-joint-kits/
@hjfcoco
3 ай бұрын
Awesome ty 🙌