Best video for this I could find. If you have trouble with the metal plate lining up then the cage is upside down.
@reesecales71884 жыл бұрын
Outstanding video.. Clearly can see everything very well explained good lighting to see small detail.. Thanks for video did mine was simple with this...
@codystubblefield93267 жыл бұрын
awesome video, very descriptive. thanks!
@kylecompagnon39176 жыл бұрын
Perfect explanation. Thanks
@philtaylor76576 жыл бұрын
Excellent video....... Thanks.
@zoedorarey6 жыл бұрын
This is a really great video. I like the sprag clutch demonstration, roller engagement, and hub hornet should link to your video and sponsor you with a free kit. Because your video is way better than what they put out. Your vid actually explains to me the how and why so much better. Tyty
@Solitude313
6 жыл бұрын
zoedorarey Thank you very much for the words. Glad I could help you out, as this diff really is kind of tricky compared to just gears
@zoedorarey
6 жыл бұрын
SolitudeCustoms i have rebuilt posi and limited slip diffs in the old hotrods that are so much simpler. I was afraid to tackle the job when i saw the blowup diagram of the thing. And the sprag instructions i got were absurd. Now i'm not worried. Thanks. Wife and i have ace 900's and we pound the snot out of them. Demand drive is the weak link.
@roybuckland934610 ай бұрын
Excellent video thankyou
@mikebottorff5933 жыл бұрын
Great video
@edgarza46493 жыл бұрын
Thanks for sharing good video
@Gargamale795 жыл бұрын
I did a rebuild & the ring gear creates a lot of noise now when being turned by hand. What should I look for to eliminate this noise? Sounds similar to rocks rattling in a can.
@bspeed712 жыл бұрын
loved the video and thanks. but i never found the short video on how to test the electrical to see if it actuates before putting it back in the machine. Did you ever make the video?
@Theman-ms9pt5 жыл бұрын
What size bolt did you use for front drive shaft?
@jag3rmeister7117 жыл бұрын
The nylon nut problem was fixed in 2014 I believe.. Correct ?
@Jon-ko3vv7 жыл бұрын
did this diff die all together or was the 4wd just kicking out randomly and making noise?
@Haul4Christ14034 жыл бұрын
I need to talk to you man!!! I had an axle break and tear the wires off and out of the differential. How do I fix that??
@joelsmith5886 Жыл бұрын
Is this the same unit or at least very similar to the front diff in my 2011 800rzr?
@timhill37404 жыл бұрын
Where are you located? If I send you my transmission what would you charge to rebuild it for me?
@chudin47675 жыл бұрын
Always replace armature also.
@SoutheastHVAC4 жыл бұрын
11-14 rzr right?
@chudin47675 жыл бұрын
Oil changes help..
@timhill37406 жыл бұрын
How can I tell it is being energized when I apply voltage?
@Solitude313
6 жыл бұрын
It should lock in and spin the Axle Hubs when 12v is applied and then not spin when unhooked.
@linksatcolumbiasuper55036 жыл бұрын
I know this is an older video, But did you ever figure out why the armature plate wouldn't work? I'm having the same problem.
@Solitude313
6 жыл бұрын
Links at Columbia Super As far as it not fitting? I think they said it was for a 1000
@linksatcolumbiasuper5503
6 жыл бұрын
Ok, Thank you
@patrickpronovost43095 жыл бұрын
the covert with a 7 bolt rub on the differential gear when i torque it and the pinion does not turn what the problem, i tried everything
@Solitude313
5 жыл бұрын
There is something going on with your armature plate, it has to sit down into the cut outs. If you can, message me some pictures on Solitude Customs Facebook Group or on the main page.
@Dalej995 жыл бұрын
Can I assume this is same or extremely similar for ranger 900??
@Solitude313
5 жыл бұрын
Yes, its should be very similar if not the same.
@Dalej99
5 жыл бұрын
Thanks!
@edwardaderman690010 ай бұрын
What state are you in
@franktank8017 жыл бұрын
good job but I need torque spec for all bolt please
@Solitude313
7 жыл бұрын
francois simard 7-11 ft.lbs
@franktank801
7 жыл бұрын
I dont wait too long.... thank you very much.... and your video help me a lot.... thanks
@Solitude313
7 жыл бұрын
I had it close by.. not sure why there is a range but it's what's listed. Unless the 2 big ones are 11 ft.lbs and smaller is 7 ft.lbs
@mikebottorff5933 жыл бұрын
Is this the same for a 2016 Polaris sportsmen 450 ?
@Solitude313
3 жыл бұрын
It should be very close if not the same
@mikebottorff593
3 жыл бұрын
Thank you for reply that's cool to know how it works
@321morton5 жыл бұрын
How did you get the flat stock between the bearing and nylon spacer
@Solitude313
5 жыл бұрын
Just kept stacking flat bar until it got more and more
@fortteen26367 жыл бұрын
why fo the rzr diffs go out so much?
@Solitude313
7 жыл бұрын
Keyton Davis Because they come factory with Plastic Internals and they need upgrading.
@singlepistonproductions32326 жыл бұрын
Would it be the same on a Kawasaki mule?
@Solitude313
6 жыл бұрын
Honda 420 Dude No. Not at all, Polaris is specific. That would be closer to a Yamaha Id imagine
@singlepistonproductions3232
6 жыл бұрын
SolitudeCustoms okay because I need to rebuild mine and not sure what I need to buy for it to be rebuilt
@djmorgan8783 Жыл бұрын
Could somebody just replace the pinion bearing without removing the whole differential I hammer too hard on my roll pin and now hear noise in the front differential
@chudin47675 жыл бұрын
Good luck with those all balls bearings. They suck
@jasond12455 жыл бұрын
Good video but every time I look at a Polaris front diff I just think its poorly design.
@chudin47675 жыл бұрын
Stock sprauge is junk.....replace with niche brand....$78
Пікірлер: 52
Best video for this I could find. If you have trouble with the metal plate lining up then the cage is upside down.
Outstanding video.. Clearly can see everything very well explained good lighting to see small detail.. Thanks for video did mine was simple with this...
awesome video, very descriptive. thanks!
Perfect explanation. Thanks
Excellent video....... Thanks.
This is a really great video. I like the sprag clutch demonstration, roller engagement, and hub hornet should link to your video and sponsor you with a free kit. Because your video is way better than what they put out. Your vid actually explains to me the how and why so much better. Tyty
@Solitude313
6 жыл бұрын
zoedorarey Thank you very much for the words. Glad I could help you out, as this diff really is kind of tricky compared to just gears
@zoedorarey
6 жыл бұрын
SolitudeCustoms i have rebuilt posi and limited slip diffs in the old hotrods that are so much simpler. I was afraid to tackle the job when i saw the blowup diagram of the thing. And the sprag instructions i got were absurd. Now i'm not worried. Thanks. Wife and i have ace 900's and we pound the snot out of them. Demand drive is the weak link.
Excellent video thankyou
Great video
Thanks for sharing good video
I did a rebuild & the ring gear creates a lot of noise now when being turned by hand. What should I look for to eliminate this noise? Sounds similar to rocks rattling in a can.
loved the video and thanks. but i never found the short video on how to test the electrical to see if it actuates before putting it back in the machine. Did you ever make the video?
What size bolt did you use for front drive shaft?
The nylon nut problem was fixed in 2014 I believe.. Correct ?
did this diff die all together or was the 4wd just kicking out randomly and making noise?
I need to talk to you man!!! I had an axle break and tear the wires off and out of the differential. How do I fix that??
Is this the same unit or at least very similar to the front diff in my 2011 800rzr?
Where are you located? If I send you my transmission what would you charge to rebuild it for me?
Always replace armature also.
11-14 rzr right?
Oil changes help..
How can I tell it is being energized when I apply voltage?
@Solitude313
6 жыл бұрын
It should lock in and spin the Axle Hubs when 12v is applied and then not spin when unhooked.
I know this is an older video, But did you ever figure out why the armature plate wouldn't work? I'm having the same problem.
@Solitude313
6 жыл бұрын
Links at Columbia Super As far as it not fitting? I think they said it was for a 1000
@linksatcolumbiasuper5503
6 жыл бұрын
Ok, Thank you
the covert with a 7 bolt rub on the differential gear when i torque it and the pinion does not turn what the problem, i tried everything
@Solitude313
5 жыл бұрын
There is something going on with your armature plate, it has to sit down into the cut outs. If you can, message me some pictures on Solitude Customs Facebook Group or on the main page.
Can I assume this is same or extremely similar for ranger 900??
@Solitude313
5 жыл бұрын
Yes, its should be very similar if not the same.
@Dalej99
5 жыл бұрын
Thanks!
What state are you in
good job but I need torque spec for all bolt please
@Solitude313
7 жыл бұрын
francois simard 7-11 ft.lbs
@franktank801
7 жыл бұрын
I dont wait too long.... thank you very much.... and your video help me a lot.... thanks
@Solitude313
7 жыл бұрын
I had it close by.. not sure why there is a range but it's what's listed. Unless the 2 big ones are 11 ft.lbs and smaller is 7 ft.lbs
Is this the same for a 2016 Polaris sportsmen 450 ?
@Solitude313
3 жыл бұрын
It should be very close if not the same
@mikebottorff593
3 жыл бұрын
Thank you for reply that's cool to know how it works
How did you get the flat stock between the bearing and nylon spacer
@Solitude313
5 жыл бұрын
Just kept stacking flat bar until it got more and more
why fo the rzr diffs go out so much?
@Solitude313
7 жыл бұрын
Keyton Davis Because they come factory with Plastic Internals and they need upgrading.
Would it be the same on a Kawasaki mule?
@Solitude313
6 жыл бұрын
Honda 420 Dude No. Not at all, Polaris is specific. That would be closer to a Yamaha Id imagine
@singlepistonproductions3232
6 жыл бұрын
SolitudeCustoms okay because I need to rebuild mine and not sure what I need to buy for it to be rebuilt
Could somebody just replace the pinion bearing without removing the whole differential I hammer too hard on my roll pin and now hear noise in the front differential
Good luck with those all balls bearings. They suck
Good video but every time I look at a Polaris front diff I just think its poorly design.
Stock sprauge is junk.....replace with niche brand....$78