Holy cow Lou! 100 degrees in the cabin?! You've made that thing into an all weather beast! Great video.

That method for bleeding the coolant, GENIUS!!

I seen this video n did the front , side, rear , now awaiting for the heater u put in the description, thanks again🤘🤘

Great vid!!!!! Now to go get parts!!!! Thanks

We have one of these installed on our rig. We removed the unit and back flushed it but there’s no heat coming from the unit. Any ideas?

Thanks

Hey, really good video. One question where did you get the radiator hose wire pipes

@HowToLou

Жыл бұрын

I got mine from ebay, but here they are on Amazon GRT A Pair 1 INCH to 5/8 CAB Heater Y Fittings UTV SXS RZR CAN AM Polaris Made from Aluminum a.co/d/bS0yFtC

Why only shut off one heating tube for the summer? Wouldn't you have to shut off both tubes with a valve?

@HowToLou

Жыл бұрын

Its a liquid loop. If you shut off a valve anywhere in the loop, no hot liquid flows at all.

Hey Lou. Did you end up having to run 2 vet hoses to the windshield for defogging? Your rzr build is exactly what I was planning to do

@HowToLou

Жыл бұрын

I have not had any fogging issues. There are still enough leaks to circulate in outside cold dry air to keep humidity down.

Where would I buy the 6mm coarse thread 2 inch bolt at from the make your mini bike faster torque converter vid?

@HowToLou

2 жыл бұрын

Any hardware store in the fastener aisle. They are in those pull out tray drawers. They come in a little bag of one or two bolts, not a big box.

@cheesesteak7196

2 жыл бұрын

@@HowToLou dose it need to be completely threaded?

@HowToLou

2 жыл бұрын

Yes it needs to be threaded all the way, because you will screw it in most of the way. Ask at the hardware counter. I got mine at Menards. I am sure Lowes would have them too. I think this is the correct bolt on Amazon. M6 x 50mm Flanged Hex Head Bolts Flange Hexagon Screws, Stainless Steel A2, DIN 6921, 15 PCS www.amazon.com/dp/B08CZ97CPK/ref=cm_sw_r_cp_api_glt_i_Y4C5GR046EJZMSEY99TP?_encoding=UTF8&psc=1

@cheesesteak7196

2 жыл бұрын

@@HowToLou thanks

When hooking up the heater hoses does it matter witch one goes we’re on the heater

@HowToLou

Жыл бұрын

No. The hot liquid can flow either way.

@tylerburnworth6815

Жыл бұрын

Okay just making sure because mine is overheating now don’t know why

@HowToLou

Жыл бұрын

I guarantee you still have air to bleed out of the lines. Mine overheated for a while also until I got it all out. You can try filling the entire heater core with coolant, before attaching it to the hoses, so you don’t have so much air in the system. Park your razor up a hill, and keep bleeding it. That was literally the hardest part of the whole project.

@tylerburnworth6815

Жыл бұрын

@@HowToLou how did you bleed yours

@HowToLou

Жыл бұрын

I filled the core with coolant, connected it into the system, and ran it with a bottle (big funnel) of extra coolant sealed in the fill hole. Squeeze the hoses, rev the engine, repeat. Parked uphill. Just like in the video.

Is this heater still working? And also is it waterproof?

Awesome video. Would you need valves on both hoses? Or 1 good enough? Thanks

@HowToLou

Жыл бұрын

Its a liquid loop. One valve is enough to stop all flow.

@brentglass5998

Жыл бұрын

@@HowToLou great thanks. I’m in process of ordering stuff. Roughly how much 5/8 hose did you use?

@HowToLou

Жыл бұрын

I don’t remember exactly, but 6 total feet should cover it for sure.

@brentglass5998

Жыл бұрын

Thanks for the info. Appreciate it

Hey there do you mind telling me how you got upper windows?

@HowToLou

Ай бұрын

See my other video on building full rzr doors

Sorry one question. Do I need to add that off valve? Or would it help the coolant stay cooler in the summer now that it has an extra radiator to go through

@HowToLou

Жыл бұрын

You don’t need the valve, but trust me, you will want it in the summer. Even with the fan off, hot liquid circulating under your dash will make you hotter.

@gskills

Жыл бұрын

@@HowToLou thanks makes sense. I'll add a valve. Excellent work

Your DIY explanation is awesome. You need more views! Subscribed?

Sorry have one more question about the torque converter I did the throttle lock thing and the belt on my torque converter still won’t go up. What do I do?

@HowToLou

2 жыл бұрын

Your engine must not be hitting very high RPMs. Check it with a spark plug tachometer, like this. www.amazon.com/dp/B07PMJH7QV/ref=cm_sw_r_cp_api_i_TR3H8PX23FGQ3S8PYEHA Email me at HowToLou@gmail.com

@cheesesteak7196

2 жыл бұрын

I set it up on a bucket and the belt goes up but when I ride it on the ground the belt doesn’t go up forgot to mention that

@cheesesteak7196

2 жыл бұрын

I have a ct200uex with stock Every thing 196cc Engine btw the wheel feels stuck and it’s hard to push