After using the Pokit Pro in a commercial hvac environment for several months this is a review of our opinions. Spoiler alert, I actually like this meter! get yours here amzn.to/3B4Asd4
Жүктеу.....
Пікірлер: 23
@PokitInnovations Жыл бұрын
Glad we could clarify a few things for you, and for sharing your thoughts! We've shared your review with our team to look over and see where we're able to make any improvements. As you mentioned in your review, we are constantly at work refining the Pokit App to make sure that it runs as smoothly as possible, and we're looking to include some new features in the coming months.
@TheRenaissanceBuilder
Жыл бұрын
Thank you. I think you guys have developed a great product. If there is any way i can be helpful or if theres any way to work with yall, id be happy to. Again thank you
@TechNickSecurityАй бұрын
Appreciate the review! Specifically that you covered the accessory clip pack. There aren't a ton of pictures of the accessories so it's really tough to get an idea of fit or even a general sense of build quality. Thanks to your review I've ordered (2) Pokit Pro's and (2) accessory packs. Keep up the good work!
@TheRenaissanceBuilder
Ай бұрын
Thank you very much for the kind words! I hope you really enjoy your meters!
@NytefogNJ2 ай бұрын
I love magnets too HVAC brother! I’ve got magnets on so many of my tool and test equipment! I love the ProHold from fastcap for holding screws & fasteners on my M12 Fuel drill/Driver and tool bag.
@TheRenaissanceBuilder
2 ай бұрын
Proholder huh, imma look into that. Thank you!
@thogevollАй бұрын
A third type of auto-tech uses both. A high input impedance multimeter won't put a load on anything. This is essential for verifying powers and grounds.
@ruudbrokmann9815 Жыл бұрын
Awesome review after using it for a good time.
@TheRenaissanceBuilder
Жыл бұрын
Thank you Ruud!
@shortedtoground Жыл бұрын
You said small tool bag, LOL. Have a happy birthday Mr. Builder!
@TheRenaissanceBuilder
Жыл бұрын
🤣 thank you Staas!
@mikehc Жыл бұрын
This is a great review.
@TheRenaissanceBuilder
Жыл бұрын
Thank you Miguel!
@roopalee78 Жыл бұрын
Great video!!!
@TheRenaissanceBuilder
Жыл бұрын
Thank you
@691lucian Жыл бұрын
The magnets, you should totally get a commission for developing that for them! I'm eager to get my paws on one!!!!
@TheRenaissanceBuilder
11 ай бұрын
Thank you for the kind thoughts but im just in it for a good time! You will definitely like the meter it is a great device!
@shortedtoground Жыл бұрын
That Pokit Pro looks like a cool tool. I would like to see you demonstrate the oscilloscope function, if you do a video on that let me know!
@TheRenaissanceBuilder
Жыл бұрын
Actually i was trying to reach you, i wanted to do a video with you for the automotive opinion side
@camaileexd3055 Жыл бұрын
How did you install the magnet on the Pokit Pro? Great video btw!
@TheRenaissanceBuilder
Жыл бұрын
Hi thank you so much for watching and asking! So yea its just double stick tape. I used 3m trim tape but it doesn’t need to be that strong. I have it on good authority that Pokit is working on a protective sleeve that has magnets built in so keep a look out for that!
@thogevollАй бұрын
Are you sure how you are pronouncing its name? I think they pronounce it like pocket-pro because it fits in your pocket.
@TheRenaissanceBuilder
Ай бұрын
I think you are correct, since working with there developer team i have changed how i say that way now aswell
Пікірлер: 23
Glad we could clarify a few things for you, and for sharing your thoughts! We've shared your review with our team to look over and see where we're able to make any improvements. As you mentioned in your review, we are constantly at work refining the Pokit App to make sure that it runs as smoothly as possible, and we're looking to include some new features in the coming months.
@TheRenaissanceBuilder
Жыл бұрын
Thank you. I think you guys have developed a great product. If there is any way i can be helpful or if theres any way to work with yall, id be happy to. Again thank you
Appreciate the review! Specifically that you covered the accessory clip pack. There aren't a ton of pictures of the accessories so it's really tough to get an idea of fit or even a general sense of build quality. Thanks to your review I've ordered (2) Pokit Pro's and (2) accessory packs. Keep up the good work!
@TheRenaissanceBuilder
Ай бұрын
Thank you very much for the kind words! I hope you really enjoy your meters!
I love magnets too HVAC brother! I’ve got magnets on so many of my tool and test equipment! I love the ProHold from fastcap for holding screws & fasteners on my M12 Fuel drill/Driver and tool bag.
@TheRenaissanceBuilder
2 ай бұрын
Proholder huh, imma look into that. Thank you!
A third type of auto-tech uses both. A high input impedance multimeter won't put a load on anything. This is essential for verifying powers and grounds.
Awesome review after using it for a good time.
@TheRenaissanceBuilder
Жыл бұрын
Thank you Ruud!
You said small tool bag, LOL. Have a happy birthday Mr. Builder!
@TheRenaissanceBuilder
Жыл бұрын
🤣 thank you Staas!
This is a great review.
@TheRenaissanceBuilder
Жыл бұрын
Thank you Miguel!
Great video!!!
@TheRenaissanceBuilder
Жыл бұрын
Thank you
The magnets, you should totally get a commission for developing that for them! I'm eager to get my paws on one!!!!
@TheRenaissanceBuilder
11 ай бұрын
Thank you for the kind thoughts but im just in it for a good time! You will definitely like the meter it is a great device!
That Pokit Pro looks like a cool tool. I would like to see you demonstrate the oscilloscope function, if you do a video on that let me know!
@TheRenaissanceBuilder
Жыл бұрын
Actually i was trying to reach you, i wanted to do a video with you for the automotive opinion side
How did you install the magnet on the Pokit Pro? Great video btw!
@TheRenaissanceBuilder
Жыл бұрын
Hi thank you so much for watching and asking! So yea its just double stick tape. I used 3m trim tape but it doesn’t need to be that strong. I have it on good authority that Pokit is working on a protective sleeve that has magnets built in so keep a look out for that!
Are you sure how you are pronouncing its name? I think they pronounce it like pocket-pro because it fits in your pocket.
@TheRenaissanceBuilder
Ай бұрын
I think you are correct, since working with there developer team i have changed how i say that way now aswell