Would this fit another 2011 style threaded barrel? I am looking at getting the Tisas Nightstalker and I want to put a comp on the threaded barrel it comes with. Thanks.

Real question here is will is work on the cs or potentially cause issues because the shorter barrel length?

Will this fit only the staccato or can I put this on any 2011 that has a bull barrel

this thing will not crank on from hand tightened to 15 degree under-clock to perfect clock like what aligns with the muschi and can be done with other barrels/non-staccato’s. Am I wrong about that? I tried it and got stuck about 5 deg from perfect clocking and was a heck of a time getting the comp back off. Used a second set of the shins and hand tightened to about 7.5 degree under-clocked and then tightened with wrench from there. If I’m right, might be worth changing the staccato specific muschi. If I’m wrong, I guess I’ll try again from 15 degree/muschi alignment if this one comes loose during use 😅

@ParkerMountainMachineNH

11 ай бұрын

Your best bet would to be email customer service with pics of where it’s landing with no shims and our armorer can assist with proper installation

Does it only fit on the staccato p and c2??

Do you think you will end up making a comp for the CS? Not sure what is possible.

@ParkerMountainMachineNH

Жыл бұрын

Honestly we don't know yet. We only have a P and C2 in house.

@CookbookAdventures

Жыл бұрын

@@ParkerMountainMachineNH Ok cool. Thanks for replying.

Have you guys considered making a longer frame for the C2 so that it extends flush with the comp?

Is rockset or any Thread lock recommended?

@ParkerMountainMachineNH

Жыл бұрын

We supply red locktite 272 with the comp

is it possible to send in a barrel for you guys to install it

@ParkerMountainMachineNH

3 ай бұрын

Yes of course. We have that service on the website. Just search comp install

@shizuos8056

3 ай бұрын

@@ParkerMountainMachineNH awesome thank you very much

Do we remove the o-ring?

@ParkerMountainMachineNH

Жыл бұрын

Yes, remove the o-ring

@r1raulito

Жыл бұрын

Thank you

@r1raulito

Жыл бұрын

I am making this more difficult than it should be. When I add the shims, I shouldn't be able to turn past hand tightened torque?

@r1raulito

Жыл бұрын

Got er done. Ez pz.

No video of the comp in action?

@ParkerMountainMachineNH

11 ай бұрын

We have plenty of videos on our social media platforms of the comp in action

@nedflanders5649

11 ай бұрын

@@ParkerMountainMachineNH sorry I’m one of those people that doesn’t have a social media account. I rely on YT for information on products.

@Rainierarms

2 ай бұрын

@QVOTactical just put out a good one today!

Just get the dawson precion ice compensstor. No loctite nor vice needed.

@jmarmstrong23

6 ай бұрын

But it’s ugly as hell

@Embarrassed4U

Ай бұрын

It's ugly af