Hemp can work as a backing. I backed a few bows with it ,using ordinaire white woodglue. The result is a higher lb and a ferm backing.
@Helmbowman
25 күн бұрын
Thats good to know, i will try with wood glue, thanks!
@EB-rn3qb
24 күн бұрын
@@Helmbowman here is what I did. Soak the hemp in water. Like sinew. Squeeze out the excess water and lay it flat on a board. Comb the hemp ,like sinew, and then soak it with woodglue. Run of excess glue and put the hemp on the back of the bow. Same like sinew. Let dry for a few days. Hope it helps.
@Helmbowman
24 күн бұрын
Basically like sinew backing, thanks a lot for advise, i will try your way!
@JasonHurricane25 күн бұрын
I was thinking about this the other day at the hardware store Great job!
@Helmbowman
25 күн бұрын
Thanks a lot! I think it can be good!
@misiorro519625 күн бұрын
Another way to backing a bow… not the best as you prove. Thanks for this experiment.
@Helmbowman
25 күн бұрын
Thanks a lot!
@user-nj4cm1lf9h25 күн бұрын
Я пробовал клеить Лён, у меня не ломался лук, тилер плохой значит... Так же клеил в ряд льняную верёвку, тоже хорошо держит 😊
@Helmbowman
25 күн бұрын
Nice! Thanks for comment!
@jarchdm25 күн бұрын
You are prolific. I'm still working on my testing jig. Making progress but had to cut it apart because errors. Getting close to finishing.
@Helmbowman
25 күн бұрын
Thanks! Just be patient, it never goes according to plan…Good luck!
@jarchdm
25 күн бұрын
Thanks, I'm getting there albeit slowly
@halissonukan488512 күн бұрын
Talvez você possa fazer fibras de bambu para esse seu projeto e usar outro tipo de cola Tek Bond 3 e depois enrolar um outro tipo de fibra principalmente nas juntas de seu arco
@Helmbowman
11 күн бұрын
That is good idea, i will try that, thanks for watching friend!
@jarchdm25 күн бұрын
That hemp looked difficult to work with
@Helmbowman
25 күн бұрын
Its weird, does not wet as easy as fiberglass or sinew, but i think it can be done with some changes
Пікірлер: 21
Hemp can work as a backing. I backed a few bows with it ,using ordinaire white woodglue. The result is a higher lb and a ferm backing.
@Helmbowman
25 күн бұрын
Thats good to know, i will try with wood glue, thanks!
@EB-rn3qb
24 күн бұрын
@@Helmbowman here is what I did. Soak the hemp in water. Like sinew. Squeeze out the excess water and lay it flat on a board. Comb the hemp ,like sinew, and then soak it with woodglue. Run of excess glue and put the hemp on the back of the bow. Same like sinew. Let dry for a few days. Hope it helps.
@Helmbowman
24 күн бұрын
Basically like sinew backing, thanks a lot for advise, i will try your way!
I was thinking about this the other day at the hardware store Great job!
@Helmbowman
25 күн бұрын
Thanks a lot! I think it can be good!
Another way to backing a bow… not the best as you prove. Thanks for this experiment.
@Helmbowman
25 күн бұрын
Thanks a lot!
Я пробовал клеить Лён, у меня не ломался лук, тилер плохой значит... Так же клеил в ряд льняную верёвку, тоже хорошо держит 😊
@Helmbowman
25 күн бұрын
Nice! Thanks for comment!
You are prolific. I'm still working on my testing jig. Making progress but had to cut it apart because errors. Getting close to finishing.
@Helmbowman
25 күн бұрын
Thanks! Just be patient, it never goes according to plan…Good luck!
@jarchdm
25 күн бұрын
Thanks, I'm getting there albeit slowly
Talvez você possa fazer fibras de bambu para esse seu projeto e usar outro tipo de cola Tek Bond 3 e depois enrolar um outro tipo de fibra principalmente nas juntas de seu arco
@Helmbowman
11 күн бұрын
That is good idea, i will try that, thanks for watching friend!
That hemp looked difficult to work with
@Helmbowman
25 күн бұрын
Its weird, does not wet as easy as fiberglass or sinew, but i think it can be done with some changes
Oops exploding bow😮
@Helmbowman
25 күн бұрын
Bows always find a way to shock me 😂
@jarchdm
25 күн бұрын
@@Helmbowman 😁😆😜