Here from My Mate Vince

@AndrewPaul

5 жыл бұрын

Welcome and many thanks for watching :)

@MrJ0mmy

5 жыл бұрын

me too

@gibbo9089

5 жыл бұрын

And me!

@RogerBarraud

5 жыл бұрын

Moi aussi! Honhonh! :-)

@JustMe-sq1vh

5 жыл бұрын

me thrice!

Just wanted to say thank you for this video, I purchased a ps4 off eBay and with the help of this video and another youtuber that also does ps4 repairs I was able to get it working. Not only did I have to replace the HDMI port, but also the blu-ray connector on the motherboard, also a missing component from under the motherboard and a blown filter on the hdmi line.

Love your videos, had issues with the my PS4 disk drive and managed to fix it. My fix was not as complicated as yours but your video's gave me the courage to attempt mine. I'm surprised that your subscriber base is not higher! I have watched lots of your video's even though I dont have other faults on my console but who knows maybe one day. All the best and thanks for sharing your knowledge. Top man !!

Understand that all disk drives (I say 'all' because this is what I have found so far...) have one thing in common: a read head that travels to and fro on 2 rods. Over time those rods will pick up very fine dust in most cases but in some cases much more trash like animal hair etc due to the unit being used in a less than clean atmosphere. Smoke from tobacco, cooking vapors etc are slow death to disk drives so keep that in mind. The motor that drives that head is tiny and as trash builds up on the guide rods, the motor has to work harder and after a certain time can no longer move the read head resulting in errors like 'failed program installation', 'bad disk' etc. The solution is very simple and has worked every time I have run into failed disk/disk drive situations. Clean the rods with appropriate swabs using a little alcohol then follow up with a light, synthetic oil followed by wiping the rods again. I just used this procedure on my PS4 Pro (original) that would not read the disk and it now works like a charm and probably will for several years to come. The console, BTW, has been in medium to heavy use for about 13 years and after cleaning the drive as described here, replacing the fan and giving it a good cleaning is back in normal operation. PS A good source of parts is gamersrepair dot com.

Hello, just wanted to tell you your video helped me to figure out what that white dog bone thing was that was in a PlayStation I took apart. Lol I thought it was a piece of my grandkids toys. Thanks, keep up the good work. I also enjoyed the fix it competition between you and My Mate Vince.

Thank you for this professional, in depth and good diagnosis ill look for one on the BDP - 015 Thanks

good video on ps4 repair seen loads of videos but yours is about the cleared iv seen so far 🎮🎮

Thank you sir your video saved me from having to replace my ps4!

I've had a few of these come in. Pain in the ass when you hope it's the BRD PCB and it always ends up being the MOBO IC's. Great work again Andrew. You're a natural.

@cairnserelli72

7 жыл бұрын

Oh....and the fume extractor eating parts is just awesome, isn't it lol. I wasn't going to say anything after the first one got sucked away...but after the second I just had to stop the video and comment on that......I did have a good laugh...and I feel your pain all the way over the Atlantic lol...

@AndrewPaul

7 жыл бұрын

Absolutely lol - so annoying :-) Still, at least I know it's working ha ha!

@cairnserelli72

7 жыл бұрын

Andrew Paul you're a good man. keep it up!

@AndrewPaul

7 жыл бұрын

Cheers mate :-)

@Infiniti25

5 жыл бұрын

@@AndrewPaul You should copy Rossmann and use some mesh/netting over your exhaust pipe to catch some of the bigger things like these 6-legged beasts.

really helpful without directly pointing out my issue. my disks would not go all the way in the drive, but you pointed out some micro switches attached to the motor, in my case one of these micro switches had burnt out. i had a donar drive to replace that motor pcb, problem solved.

Gotta love that reflection on the multi metre

So I had the same problem you did but instead of replacing the chips I just refloated all the legs on the four chips you replaced. But thanks for showing me that I had no idea where to look next.

Those z809 ICs appear to be maybe an optocoupler or latch/gate. Seen a lot of them repairing bowling alley circuit boards. If so they are used for a type of switch for voltage controlling to specific functions.

Thanks it was a fuse on the drive logic board on mine appreciated.

Hi Andrew, Thank you!! I love your vids!! You have helped me a lot!!

You ROCK! Just subscribed and liked!!!

thanks Andrew, you guide save me some time today !

@AndrewPaul

7 жыл бұрын

Glad I could help mate.

Great videos. The 6 pon chips are FETs. Gate drain and source

@Luis_Mansilla

Жыл бұрын

Hola, abra datasheet del ic 608 o algún reemplazo? Saludos

Hey, I had the exact same problem on a console. Then I replaced the components like you did in the video and the console is now running again. I was already despairing. Thanks so much

@AndrewPaul

Жыл бұрын

Glad I could help

Nicely done

Andrew .. You make videos that Actually help --I have had 6 of these in my store -Sold them on ebay . and im selling another as we speak on ebay --Next time i will try --Ive been Watching your Reball videos - I have troubles..Such as ,, What is a good temp Solder gun ----What type of flux to remove chip --What type of flux to re-apply balls -----HOW DO I GET THE SOLDER BALLS TO STAY ON CHIP once the cleaning has been complete ? you make it seem so easy - but never the less ., your videos have taught me alot .. even if you dont have time to answer the questions --Please continue to put out these type of videos -

@AndrewPaul

7 жыл бұрын

No problem - I handed one back myself a good few months ago which is annoying ha ha! I have some videos which might be of some use as below: The basics of creating BGA Rework Profiles: kzread.info/dash/bejne/lH-CtbeGhKu6kdY.html Equipment Requirements for BGA Rework: kzread.info/dash/bejne/rGWWxsZxXafFlrQ.html BGA Reballing - how to correctly apply flux and solder balls for a successful reball kzread.info/dash/bejne/lGeuk5SocafFk6Q.html The key is use as minimal amount of flux as is possible - seriously a pea sized amount is enough when applied properly - that video above should show you the way. It's a shame we lost the original after someone hacked my account as it's not as clear these days but next time I do one I may well re-make it.

thank you man, i repair one with a broken transistor. Greatings from italy!

great video very helpful thanks.

Great video - what microscope and camera are you using, the pictures are very clear and crisp

Good job man

@AndrewPaul

7 жыл бұрын

Cheers mate.

My hero! Thanks a lot!

i do know i took it apart and had a disk loaded and ready to run the gears all run well. once i powered the ps4 on it did run how ever i do not get the disk to feed in or eject . the PS4 did not power on when i tried to put the disk in

Thank yoy I have realise I have no power to the disk drive. Not sure how to proceed but this is a step in the right direction.

Nice vidéo thank you it hoped me with a customer console

Hey Andrew ur videos the best sir! Can u tell me what fuse tester i can buy for this kinda errors? thanks model brand ect.., link?

where do you get that FET details and alternative for that chip

This tutorial saved my life! Thanks a lot, bro

GOOD, IT WORKED FOR ME. i FOUND A BLOWED FUSE.

Good work,I have seen a couple of your videos,the people doesnt apreiciate this kind of troubelshootign as it should be. I saw you test the semiconductros on OHMS range,make your life simpler in the future and test all the semiconductros on the DIODE range as it should be tested(measuring the drop acros the device bjt,mosfet,diode) The circuitry you were fixing,I would say that its a a two seperate Ldo regulators for the bd drive 5v and 3v3 maybe,measure it for future reference,I first thought that its a synchronus buck converter but I don see any inductor so its an ldo regulator or more so a pwm regulator beacause of the switching transistor in the gate of the mosfets.Oscilloscope would ease your work if you have it and give it a try its not hard to learn how to use it. You definitly know how to troubleshoot a ps4,keep up the good work.I wish you all the best.Cheers

@AndrewPaul

7 жыл бұрын

Many thanks mate and cheers for the tips / extra info. :-)

@halidhalilovic1866

7 жыл бұрын

No problem,my english is prety nasty hah,but I think u see the point :)

why couldn't you do comparative resistance reading between the two motherboards for the 6 pin ic's like you did for the resistors? wouldn't you get some kind of resistance over certain pins which would be the same providing both ic's were working

Do you have a video of you swapping the motor controller?

Hi Paul! Thank you for your video! This component is not mentioned anywhere. Are you sure his code is right? I would need it to repair a Ps4. How to do it to understand the exact model well. I am convinced that the world is full on the outside. You just need to know the right initials. Or equivalent.

you are a god ... man

Thanks for the video, great as always Andrew. I found f501 and f203 blown; replaced them and the drive is working again but the BD7763EFV driver IC is quite noticeably hot to touch, is that normal or is there something else I need to look at?

@AndrewPaul

7 жыл бұрын

+Justin Regier providing it's working mate all should be fine.

Have you ever dealt with a Ps4 pro psu that starts losing voltage as soon as the power is turned on? Measures constant 5v at the small plug but then as soon as it's turned on, both the 12v and 5v will drop .01v at a time. Thank you

Thank you for the detailed video! I have a Destiny Edition ps4 that had a damaged HDMI port. I replaced the port but the drive would not load or eject. Tried it with a different logic board from a dead system and it loaded fine. The third fuse you tested on the BD logic board turned out to be bad. swapped it with the fuse from the donor board and my console is now working 100%! And I only spent $20 on the broken consoles and about $5 for the port. Had I not found your video i would gave given up on it!

@AndrewPaul

7 жыл бұрын

Excellent news and congratulations on the successful repair! :-)

Works for me thanks

Where to find the components "608zt", "26", and small resistors? I can't find a standard reference

Which ribbon cable of the 3 is the one for the eject button?!

what is the name of the mesuring tool u used on da transistors? n the liquids u used as well?

Hi! what do you call the ribbon in the BD Drive that's responsible for the mechanism? Thanks for the reply in advance!

Have a question I tested the fuse that read 200k on your video mine was dead I replaced it but i took it out from a laptop and now it's reading around 20k is there something else wrong with it or is it not the right fuse I used a fuse identical to the ps4 fuse I don't know much about smd and stuff

hi i have a ps4 with a faulty drive all 3 sensors do as they should, but there is no power the the eject motor. so it wont accept a disk although it does beep and power the station. If you manually push the disc the laser begins to seek. Check the motor is fine as is the small flex and plugs on both sides so guessing its the power to the motor. Problem is i have no idea where it runs on the logic board

Andrew , another great video.Can I make a request? Could you show us some corrupt software fixes. I'm referring to the endless update loop. I have seen your NOR chip dump and rewrite but is there anything else if that isn't the cause or fix.

@AndrewPaul

7 жыл бұрын

In many cases sadly it's not that simple as much of the flash is encrypted. If anything changes however then it'll be posted up.

I had one of these recently. Was a faulty logic board. Let's just say I took a different route in my attempt to repair and failed. After watching this video, I realize the fuses were most likely the issue. What are the ratings for each fuse?

Hi! I’ve a problem with PS4 FAT. I finded the fuse burned F203 in board pcb BDP-020. I changed this fuse and it burns again. I change all dvd (motor, lens etc.) and it burns again! Why the fuse burns?

Do you have links where I can buy the parts you fitted? I have a broken ps4 with bad drive arriving in a couple of days and just in case it is this at fault so I can order the parts when I test it. thanks!

Some sort of screen could be used on the exhaust chute to stop such stuff

What exactly are the components you replaced.

Took mine apart and watched this video as I did it.cleaned it well and then after all that I got an unrecognized disk...my dumb ass put it in upside down...lol.so clean as a whistle PS4 now and she works great.even put a tin foil square by the antenna underneath of it before screwing it in and it has great range for wifi as well.thanks for helping me kill time.hope this helps others or people who are tearing down....put that tin foil piece under the antenna.youll get great reception afterwards if you use wifi,🏆👍

Hi mate just wanting some advice my ps4 had problem with runners in drive which i fixed really easy everything is back together exactly how it was with no problems but my problem now is i turn the ps4 on it accepts disks and starts spinning but ps4 dont pick the disk up or anything it just keeps spinning as if its loaded but ps4 dont recognise anything if i press ejecr it stops spinning and puts it out normal im really at a loss as to what to do

Hello. I need to change a fuse on a PS4 slim. How hot should the (heatgun?) need to be? Hope for an answer. Thanks :)

Hi Andrew, Quick question, ps4 powers up when inserting the disc. ( so as you mentioned, there is power coming in ) But manually screwing disc in, disc drive does not react. Any ideas?

I cant insert a disc on ps4 fat first model. And there unrecognized disc on ui even though there no disc in it. What the problem is?. Should i change dvd drive?. Thank in advance.

This worked!!

Bro the thing at 10:00 where you push it down the white thing fell out and ive been trying to get it back in for 10 minutes please help!

What if there is no power to the eject button? I offer a disc up but doesnt power on

Hi, I also have a blu-ray drive that doesn't take disks in, after testing, the drive itself works (at least mechanically and electrically) when i put it in another PS4. It turns out, on this PS4 i have, one of the 3 pin transistors (the right hand one of he two in this video) is actually missing off the board. Do you know the spec of what that device is? im trying to find one to replace my missing one but i cant find what it is when searching ebay etc. And advice would be very much appreciated. I absolutely love your videos and the amount of detail you go into, very impressive indeed :-D

I love your videos, but they cannot solve my actual problem. I've got a faulty bd-drive, but nothing seems to help. I changed the drive, the board (still knowing the ps4 won't work fully), the transistors on the mainboard, the cables and the powersupply. Everything i got from the drive is starting the ps4 and doing a little sound like the drive wanting to start, but just for a second. Do you have an idea? THX!

hey, i have this problem tho on my ps4 tho... everytime i restart my ps4, it wont restart it will just turn off.. can youhelp me whats wrong to my ps4?

Hi Andrew another great video how do you remove the moisture from a motherboard to stop the bga from popcorning any help would be appreciated thanks

@AndrewPaul

7 жыл бұрын

Ideally you need a pre-heater oven - personally I use a T962A which will hold the board at a comfortable temperature ~100C for around 20 minutes before performing any BGA rework.

thx you so mush

you very good

@AndrewPaul

7 жыл бұрын

Thank you :-)

in 19:17 is it resistor or fuse and what is it value because I need to replace it

hello beautiful work it is the piece 608ZT ??

@AndrewPaul

4 жыл бұрын

It is.

I leave my Disc inside the Drive only time i remove it is when i have finished playing the whole game, Ive never had any trouble with the Drive, I bought my console on day one Brand New and it is still working like a Charm

I think I might have the same issue, I've tried as far as taking the disc drive out and fixing the small white piece of plastic but I don't have the equipment to replace ic's and transistors etc, any advice would be greatly appreciated. Thanks. Great video btw.

@AndrewPaul

5 жыл бұрын

Hi John, Where are you located bud? If you're in the UK or EU then we can arrange a repair for you. If you're interested just drop me a message to my business email address - ytandrewpaul@outlook.com. Cheers, Andy.

Great work as always! Do you happen to have a video or information on what chips need to be replaced in the event that the board is the problem? I have the same issue with a console but the board is the issue (doesn't work in another console and a new board works in this one with error CE 35888-2). Thank you for your videos and advice!!

@AndrewPaul

6 жыл бұрын

Which board? What symptoms is your console / drive displaying?

@mshockey22

6 жыл бұрын

The board is a BDP-025. The drive won't take or eject a disc. The drive will read a disc if you insert it manually. The console will also turn on if you try to insert a disc but won't ever take it. I've found your video for swapping the Renesas IC to a new board, and that may be the best option here, but I figured it was worth looking into repairing the original board if possible. Another weird issue that I noticed with this one is that it doesn't give me the "static electricity" beep after the console has been unplugged and the power button is pressed. Not sure if that is related to the issue, but I've noticed that most other PS4's will beep and flash a blue light after being unplugged. That's been said to fix the "disc not ejecting" issue for other people even though I'm sure it's only a temporary fix.

@AndrewPaul

6 жыл бұрын

If it's not taking or ejecting discs check fuse F203 for continuity on the original BD-ROM logic board.

@mshockey22

6 жыл бұрын

You are awesome!! Such a weird issue to have. Is it pretty much the same issue with the BDP-010? I've had someone call me about that one and was looking to have the board swapped but if it's a simple fix like that then that would be even better!

@AndrewPaul

6 жыл бұрын

Yes mate - same on all BDP-010 / 015 / 020 / 025. The only differences really is that some don't have an F501 but they all have F201 / 202 and 203. Drive feed is usually down to a blown F203.

hi bro can u fix error su-41674-2 or any solution...?

The most common optical drive problem I deal with is greasy rollers that result in the disc not inserting or ejecting properly. I suspect the prime cause of this may be kids handling discs shortly after eating something like a bag of crisps or adults doing the same thing, maybe after a kebab :) All the grease or oils from your hands gradually builds up on the discs which, when inserted into the drive, ultimately gets transferred to the rollers. The only solution then is to strip down the drive and wipe the rollers with some IPA. Moral of the story? - KEEP YOUR DISCS CLEAN & SCRATCH-FREE PEOPLE :)

@dazecm

7 жыл бұрын

Also regularly find that younger kids tend to treat the PS4 disc drive like a piggy bank. Can't tell you how many times I find coins in drives when opened up.

The ps4 doesn’t power on when inserting the disc

hi Andrew, my problem is kind off similar but instead off a drive feed fault it's the the disk main motor refuses to spin after reloading the disk , every thing else beed checked and seems to work normally? thx

@AndrewPaul

7 жыл бұрын

If the BD Logic board fuses are OK, replace the BDV7763 (Rohm Motor Controller) IC.

Andrew, so full detailed video, thank you for sharing your knowledge and experience. I´ve had this issue, The unit loaded the disk, but the message was it didn´t recognize the disk, so push the eject buttom and disk out. I dissasembly the unit to clean the lens, and after reassembling, both the power and the disk buttom doesn´t work, the unit can be turned on an off using the remote control. If I put the disk in the slot, there is no sound at all. I´ve seen the conectors and everything looks good. Can you help me?

@AndrewPaul

5 жыл бұрын

Does the console now appear to be completely dead?

@henrytovar4863

5 жыл бұрын

Yes it does, it only can be turned on with the control, even so, the disk unit is still dead.

@henrytovar4863

5 жыл бұрын

Andrew and all the folks, I checked the ribbon cable with the black tab, and the latch in the connector must be in position, of course, if you do it well when disconnecting there is no problem, but in my case I broke the two ears of the cable and the latch didn´t returned to the conn position. So with a plier I lifted the latch and voila, it worked, and the cleaning of the lens worked ok.

I have a BDP-010 that reads discs, pulls in, and ejects, but the touch pad on the board is non responsive, despite having continuity. any ideas where I should be looking?

@AndrewPaul

5 жыл бұрын

There is a small IC just down from the pad (an STM chip IIRC). This is a touch micro controller - seen them die occasionally. Will just need replacing most likely. Take one from a spares donor, or failing that you can perform a Renesas swap across to a new board, whichever you prefer.

Where is this regulators , transistor located?

What's the name of these components, cause I need to buy them. I'm having difficult to buy the same ones. Pls could someone help me?

Hi. On a SAA-001 board I have the 6pin ic labeled SD7 instead 608ZT, and can't find them anywhere, can you help?

@AndrewPaul

4 жыл бұрын

They're a FET but I'm unsure as to a model number. Someone did say a while back but I couldn't track them down from the number given. I'll try and probe them to work out some specs and identify some potential replacements.

Was originally diagnosed with hdmi issue the two traces were missing took it to polish shop here they said we fixed it took home. Nothing no signal. Contacted them they said take back we reflow it later call said collect the machine will never work 'we dont know what the issue is' doesnt even power on now

@AndrewPaul

7 жыл бұрын

What's wrong with it my friend?

Hi Andrew, do you replace the fuses on the logic board? Thanks to your videos I was able to discover that one of the fuses on my logic board is blown but the rest of the drive and the ps motherboard are ok. It’s just too small for me to do the repair.

@AndrewPaul

6 жыл бұрын

Hi Carl, Yes mate I do - drop me an email to ytandrewpaul@outlook.com and we can sort out the repair for you there :)

@carlwilliams3488

6 жыл бұрын

It’s the fuse at 19:17 and we’ve checked on the multimeter and under the microscope it’s obviously melted.

@AndrewPaul

6 жыл бұрын

F203 - yeah that's the usual suspect 95% of the time in these cases. With shipping, the cost of repair is £14.99 to a UK Mainland address. If you drop me a message to the above email address with your address details etc then I can get the mail-in address etc across for you. Cheers, Andy.

Could you share the tools you use repairing this ps4, where did you buy all your stuff (soldering blower, ICs,etc). Thanks a lot.

@AndrewPaul

7 жыл бұрын

A big part of my equipment used can be viewed here: kzread.info/dash/bejne/aqSbp5SiY5OqoNo.html These 6-Pin FETs can be quickly and easily removed from a donor board which can be had cheaply from eBay / AliExpress etc. I believe they're Fairchild / ON-Semi FDC608PZ.

@anthonysouby4136

7 жыл бұрын

Hier Andrew you are a life savier ! Your video are really really great ! Could you provide me reference for fuses and transistors rating plz ? I already found ic's on mouser.com . Thx

Andrew, I'm looking to order a large amount of the PS4 daughter board fuses that go bad. Typically the F203. I was hoping to just order a large quantity of them from someone like mouser. Can you point me in the right direction? I just don't know the values to look for.

@aliahmed-ew8hs

5 жыл бұрын

Thanks bro i sow your video my problem became solve .I have PlayStation switch model I checked the power espla is good still the blue light is died give me solution of it

what then transistor 41 or 26 original ?

Hey when you show the underneath of the motherboard you're working on you never zoomed out so I'm not a hundred percent sure where you were working underneath the board I know it's near the power for the Blu-ray drive but if you could have a zoomed-out picture and maybe circle where you were working that would really help

@AndrewPaul

Жыл бұрын

I'll make a note for any future videos. Thanks for the feedback :)

Great Video really, i see you watch Hindi movies :)

@AndrewPaul

7 жыл бұрын

Cheers mate - the DVD is my friends he left in the office when he let me use the space - if I need a disc for testing it's usually the one to hand ha ha! :-)

Hi Andrew your vids are so helpful, i have a board with a blown F203 fuse any idea where to get one from, I have a few old consoles would that be ok, thank you.

@AndrewPaul

6 жыл бұрын

IIRC It's either F5102 or F5101 on a scrap PS4 board which will suffice - whichever one of the pair is the same size as F203 itself (that bit I can't remember off the top of my head).

@jameswest4881

6 жыл бұрын

Sorry should have said old consoles are ps3/xbox360, thanks for your quick reply Andrew.

@AndrewPaul

6 жыл бұрын

Honestly not sure on those bud - I've only ever nicked them off PS4 motherboards or donor BD-ROM daughterboards.

@jameswest4881

6 жыл бұрын

Would you happen to know the rating of the F203 fuse Andrew.

@AndrewPaul

6 жыл бұрын

I'm not sure on that I'm afraid.

Thats another pint i owe you m8.

I have the same probkem on 1215 model :( what should I check?

@AndrewPaul

7 жыл бұрын

I have one to look at myself shortly. Video will follow.

Great content Mr Paul......but for the love of God stop staring most sentences with almost a shout and then very quickly drop the volume level to almost a whisper! Thank you very much!

Can anyone tell me what this ribbon cable is for?? 5:08 seconds

Hello andrew I have a ps4 slim that won't take any discs. Any idea maybe?

@AndrewPaul

6 жыл бұрын

kzread.info/dash/bejne/fKyZ05ecZs7QZNo.html

Same problum same model.. I tried replacing bdp 020 with new 020 board nothing.. Happend. What you think What should i do ???

@Harmansnation

3 жыл бұрын

bhai hua theek?

do you guys clean out ps4 I was recommended by trons fix

@AndrewPaul

7 жыл бұрын

Indeed I do - where are you located my friend?

thnx

Hi Andy, I have interesting issue here. PS4 CUH-1116A does not eject/feed discs. I've started from replacing fuse on BDP-025 board ('3rd fuse' - below big BD7763 IC ). I didn't have exact fuse so I took a little bigger one from ps4 logic board (my bad). BD-drive still didn't work after that. Later on I've checked this BD-drive on other PS4 console and it didn't work. Further I've replaced four ICs on PS4 logic board (SAB-001 motherboard) below connector. Resistors were OK. Still no effect. So I've took BDP-025 board from other working CUH-1116 console and installed it on BD drive I'm having problem with. Effect - It blown the 3rd fuse (below BD7763 IC) and probably damaged that IC as well. Oh fun, fun fun. I came back to original BDP-025 board and replaced BD7763 IC) and fitted it into original BD drive. At the beginning of the test I saw a little bit of smoke coming from just replaced IC. This repair is being costy. Faulty BD-drive motor? Something is burning fuses and ICs on that BD drive.

@AndrewPaul

7 жыл бұрын

Hi, Yes could be a bad motor - replace the driver IC and then the motor - see what that does. It may have taken out the fuses again so check these and the driver FETs again on the mobo just in case. Also check for any shorts on the BD-ROM cables and connectors themselves particularly on flat-flex as people tend to bugger them up by forcefully removing the cable.

@piotrnowak1302

7 жыл бұрын

Thank you for reply. I've checked ribbons from both motors (disc eject motor and 'disc spinning' motor). No shorts. No shorts on connector of 'disc eject motor'. New BD drive ordered along with two boards (donor boards), as at the moment I need to repair two BDP-025 boards. Just want to confirm that I have power coming to the drive, but feeding mechanism doesn't work. Rollers and gears checked. Will update you shortly.

@piotrnowak1302

7 жыл бұрын

Small update. After replacing BD7763 IC on both boards + replacing faulty BD-ROM (which used to fry logic boards) the disk feed/eject mechanism started to work. However on both consoles (with repaired logic boards) I'm getting "unrecognized disc" message and I can hear that disc drive is struggling to read the disc. No errors, just that message. When I plug 100% working BD ROM from the other PS4, the blu-ray disc can be read without any problem, but of course I'm getting error because of "not-married-IC". My thoughts: that faulty blu-ray fried not only BD7763 and fuse, but also some surface mount components. Hopefully Renesas IC is OK. OR maybe its just faulty laser in both consoles (fried by logic boards... previously fried by bad blu-ray drive). I will update you shortly.

@AndrewPaul

7 жыл бұрын

Was just going to suggest fried lasers - if changing laser gives no result then swap Renesas onto an otherwise good donor. Failing that then it may have done some damage to the logic side of the Renesas IC. Let's hope not!

I have a slim that has this problem. But, it won't update and gives an error code. I don't think it would be this problem if I'm getting a failed update. Am I right? I was going to replace the disc ribbon (Big one) until I saw this. It turns on from rest mode when trying to feed disc. So it has power

@AndrewPaul

6 жыл бұрын

What error is it giving bud when you try and update?

@ireilly91

6 жыл бұрын

SU-42118-6 Think that's the error I was getting when updating via safe mode I believe