I am presently doing this also in Ireland 🇮🇪 in a forest in the mountains, our diesel price has gone up to 2.15 Euros a litre, our neighbour who owns a forest is a lovely lady and she loves to know the fact that we are recycling ♻️ and I get lots of plastic from the local surrounding GAA sports clubs and the tidy towns, also I've started to undercut the local refuge garbage company, by collecting the recyclables bins for a discount, and I can burn the papers and cardboards from the mixed recyclables to heat the plastics in the plastic to diesel recycling process in this process, I told the lady who owns the forest not to tell anyone about the diesel distillery incase its stolen, but she's OK about it because we know we're doing our bit for the Environment and stopping global warming, God bless you guys for saving our planet.

@hamzaburghol5484

Жыл бұрын

Hello, please help. I have a plastic distillery. Today I made a first meal. When I drank the back, only the paraffin. I only got the paraffin. Is this normal? Or is the quality of the plastic the reason for this? Is also that every kilo of plastic gives a liter of distilled?

@patriotpioneer

Жыл бұрын

Stop Global Warming.....? What you are using as a heat source is far far worse.....

@landrytalom6997

Жыл бұрын

Je peux vous écrire en privé ?

Sincerely you deserve to be congratulated and encouraged. When I consider the ever-increasing fuel prices..., When I see the numerous plastic bottles that fill the gutters, block the bridges and cause floods during heavy rains..., Your activity not only answers the problem of household waste, but also constitutes a beginning of solution for an increased availability of fuel

@JohnSmith-egri

2 жыл бұрын

THANKS a lot

@JohnSmith-egri

2 жыл бұрын

THANKS a lot

@andzejish

2 жыл бұрын

Man years a go we had big quite industrial factories im Poland xD all closed ^^ not good for our rulers

@pwomosyonlangkreyol5394

Жыл бұрын

@@JohnSmith-egri Congratulation to you my friend. Can you help me to make astation in Haiti?

@nanaabenaamponsah

Жыл бұрын

I went to start that project . please can you help with that?

Really good job all of you. Not only are you cleaning up the local land, but you also have a near free source of plastic and you can power the operation with what you produce with enough left over to sell. It is very smart. I wish other people in poor area can do this to bring prosparity to their comunity as fuel is needed for everything. Wow.

@JohnSmith-egri

Жыл бұрын

Thanks

@JohnSmith-egri

11 ай бұрын

Thanks

Damn that a whole homemade refinery, very interesting invention and use of disposed plastic. Good job!

hi John I admire your talent and hard work, to produce fuel from plastic. i had this in mind and was going to do the same using tires, it is unfortunate that i did not continue with project you have my great respect for your devotion and talent. wish you all the best

@JohnSmith-egri

2 жыл бұрын

Thanks a lot

@Daboresa

2 жыл бұрын

@@JohnSmith-egriSir please can I have your WhatsApp number there is few things I would like to learn from your plant setup

@winstj7046

2 жыл бұрын

@@JohnSmith-egri please I need to discuss with you

@FirstLast-tx3yj

2 жыл бұрын

@@JohnSmith-egri when you heat the plastic how do yoi split the diesel from gasoline??

@JohnSmith-egri

2 жыл бұрын

@@FirstLast-tx3yj I could do another video on that if sponsor

This is so amazing! You are amazing! Solving the two big problems at one same time.

@andzejish

2 жыл бұрын

Man years a go we had big quite industrial factories xD all closed ^^ not good for our rulers

@davycoolboy4775

Жыл бұрын

So i want some explanation about your system cause it’s so simple n quiet but i want some more info?

Cheers from Romania 🇹🇩. Great job there, keep up the good work. 👍🏻

It's the future and I love that you are doing this! I want to start doing this myself

Putting that gasoline into the car might not be the best idea. It needs to have both detergents and an octane booster added to run well in a modern car. Without that, you will get carbon deposits on the injectors that could cause problems down the road, and the engine will likely also develop a knock. When you started the car, you had old gasoline in the fuel line so the result of the gasoline that you added to the tank were not clear yet. Knock should occur first while issues with carbon deposits should occur further in the future. Lucas fuel additive should avoid the carbon deposit problem while adding some MTBE or blending ethanol into it should avoid the knock issue.

@Tate.TopG.

2 жыл бұрын

Damn, you definately live in America and have been programmed to believe it. What do you think the rest of the world function? They dont have all those extra additives and I can assure you their odometer goes over 300k to 500k without engine issues. Carbon buildup will allow occur cuz carbon buildup is created by engine oil being burnt. It has nothing to do with fuel being burn. I never seen fuel being burnt on the open and leaving carbon deposit . That's why they use oil catch can , dry ice, walnut sand blasting to get rid off it.

@sanunitwaibu529

2 жыл бұрын

Hello I am interested with your chemistry on how to add some chemicals like ethanol. Can you please give me a volumetric analysis basing on ratio on how to mix them

@Kimtaehyung-we2fg

2 жыл бұрын

Thank you bro Iam fm india Iam great fan to you

@prodigalson2670

Жыл бұрын

He is just reading a script..

@Manes-Ancestrales

Жыл бұрын

Ooooo please 😏

Amazing setup! Excellent job!

All power to you for recycling otherwise unrecyclable hydrocarbons :) If you can sort off clean plastics by type and color you can extract much more value from them :) DIY Plastic Scanner is an interesting project that could help sort plastics.

Very proud of you.. You've set an amazing example and be safe!!

@JohnSmith-egri

11 ай бұрын

Thanks

I was looking forward to see the actual production process not to see the putting of the end product in a car but anyway good job guys

one man's rubbish, another man's treasure.

Its great to see that you made an idea into buissness. It not only helps the environment but is a good way to recycle plastic waste in your area. In our countries of northern Europe its beneficial to incinerate them and use heat to generate electricity and heat transfered trough pipes into our homes. Your start is crude and needs improvement but its a good start for something great in the future. A good idea. A good product and good environmental impact. Besides that your english is great. I can't speak english with such fluency like you. Plastic is and will be a problem. One which we can burn, recycle or make into useful products like fuel. After upping production of fuel and making this system more advanced I hope you will look into another ways in which you can make useful products out of waste plastic. It has still market potential as a raw material. With heat and molds its possible to make something useful out of them. Thats just my idea for side hustle after making this one profitable. Best of luck!!

@JohnSmith-egri

2 жыл бұрын

Thanks, we also look out for partner ship

Great job! Congratulations! Please make more videos! A lot of knowledge to share! You are so smart!

Show exactly what needs to be done to the plastic because I gonna start making it own file as well I’d like to see a octane test see what it reads as

Awesome job! We can make this happen everywhere.

The usa should do this and reduce its landfill buy 50%

Utterly splendid!

You guys will be rich and from other side you save nature!!! God bless you!!!!

Very very good! Congratulations of the Brazil!

What is the octane of the gasoline and what has been the long term effects of it in the car also how much energy is used to create the fuel per gallon and what other processes is used to create the gasoline

Man years a go we had big quite industrial factories im Poland xD all closed ^^ not good for our rulers

@conceptofeverything8793

Жыл бұрын

Po ile paliwo macie tam? :)

You guys could get a job at major refinery and become filthy rich for your country.. This is very cool... Much love to you guys stay safe...

Guys, damn, you have better quality gasoline than we do in Europe !!! May you continue to succeed!!! Good technology, what do you use to decompose plastics? Thanks Peter😉

@cathysandol3053

Жыл бұрын

I've seen pressure cookers

Donuts in the paddock basher wagon now 🎉, burnouts too ❤

if you blend it with ethanol you will get strong more efficient performance in your vehicle.

@Tate.TopG.

2 жыл бұрын

That's not true. Ethanol was a corruption system created by the lobbyist to get billion of dollars to the corn markets and ethanol manufacturers. Ethanol destroy engine overtime. That's why we need to had additives put in our system to clean our fuel system. Why do you think fuel gas is more expensive than gas mixed with ethanol?

What's the octane of the gasoline? 98 ,100 ?

I expect any person's capable of converting to use the tax free nongovernmental registration and regulation fuels to be as savvy as long as able please and WELL DONE ✅

Well done, Evergreen Enterprises!

Its been a year now but his car is still driving without a knock i guess

How do you differentiate diesel and petrol after burning those plastic materials? In other words, how to get petrol and diesel separately from burning?

@JARicafrente

Жыл бұрын

I think it was 3 process oil diesel and gas

nice setup`! i love it ! i cant wait 4 do it for myself, if i dont wrong, its one reactor for plastic oil, and one reactor for refinery exit from the furnance ?

Amazing brother

Very innovative. My only concern is the octane level and compatibility with the chemical needs of the modern engine. It may work for the initial time period but if it is detrimental to the valves, pistons, rubber hoses and other critical parts then . . . My having worked on cars of all ages for many decades I raise this question. As a matter of fact I even own a Nissan Pathfinder of this vintage, early 2000's.

@ericbeltrami2718

2 жыл бұрын

I think as long as it's a multi-port fuel injected engine you're good, Direct fuel injection not so much. As far as octane, it's probably higher than what we get at the pumps considering he's making diesel. Worst case scenario you swap the engine to a carburetor and run it a little rich so it douses those valves and keeps them clean.

@keesverhagen9227

Жыл бұрын

​@@ericbeltrami2718 carburator ? Diesel ? Explain please a bit more ?

how did you refine the initial oil from the plastic pyrolysis

Watching from Zambia,can you kindly share with me the drawing of your plant

Awesome job guys thanks

What about any toxic by products produced during the process?

Great job Congratulations 👏

Does your car is a diesel run car or normal gasoline car? Does the gasoline need to add any substance to filtered the gasoline to use in the car?

How do you prevent water corrosion or filter the microplastics before finishing the process towards diesel?

@patriotpioneer

Жыл бұрын

They don't & they are probably cutting down tons of trees to make firewood to make this happen...

@ADADIZZLE

Жыл бұрын

@@patriotpioneer I just realized this is a hoax because any distillery of moon shine or other fuels would produce diesel.

After the cooking process what waste are you left with? During the cooking process what are you using for fuel? Wood? Or diesel? Last question, if this is so affective why isn't it being done on a larger scale?

@mysticjaarse

2 жыл бұрын

I believe that they burn wood to heat up the plastic.

Great job guys! 😀👍

No smoking (bravo)

Isnt it that Billy Boy and his agenda wants you guys drive electrical vehicles? Thanks for the great vid

The website does not work, is there another way to reach you? I am interested in the plant.

How do you know what is to be used as diesel fuel or gasoline?

Nigeria here we come.... something is about to happen ....

wow, this is good, I like it a lot. I've been doing some research on transforming plastics into gasoline ⛽ and I'd like to learn more from you. If you don't mind.

Hi bro how to construct the processing system ?coz I have yearned to make my own diesel for long time but I need a coach......

@TheExplosiveGuy

2 жыл бұрын

You need a large steel tank that can be opened from the top that all your plastic waste goes into, which then gets a lid bolted over the top that has a pipe leading off to a distillation setup. You purge the tank with Co2 or Argon gas (to remove oxygen that would burn your product) then heat the steel tank with all the plastic waste in it by placing burners underneath it, which breaks down the plastic into a gas that collects on your condenser lines and comes out as crude oil. It has to be further distilled to get diesel from it so an additional distillation setup will be needed, and don't forget that many lighter gases like propane are created that won't condense in your collection tank, but they can be used to more efficiently heat the reaction vessel by piping the excess back under your tank. There is a ton of info online, the keywords you want to be searching for are "Plastic Pyrolosis Reactor" or "Plastic Pyrolosis How-To". And shredding your plastic before dumping it into the vessel will help with production quantities, if you're just pouring in whole bottles or other whole plastic waste, you're severely limiting how much fuel you can make at a time, by shredding the plastic you will be able to get much more density inside the reaction vessel.

@Daboresa

2 жыл бұрын

@@TheExplosiveGuy great thanks for the valuable information, I would like to ask after collecting the oil which we all suppose it will be the crude one so for further fractional distillation we will have to heat them again into another reactor in order to refine different substance or just one heating and we can collect that through fractional distillation just asking

@TheExplosiveGuy

2 жыл бұрын

@@Daboresa correct, the crude product will need additional fractional distillation to get clean and pure diesel.

@Daboresa

2 жыл бұрын

@@TheExplosiveGuyokay great thanks, this is what I was really keen to know about

How do you clean your reactor tanks

Can't you use solar electricity to heat your reactor

WOW, so good guys.

good job... keep going... cleaning de world...

How can I do this set up can you teach me.?

Please what are the methods used to prevent formation of char(black substance) at the bottom of the reactor?

How do you convert the plastic distilled oil into diesel? Distilling it again, or at a certain temperature range?

بلادنا معمرة بلاستيك.. يخصنا نعرفوا كيفاه العملية هذي

Нужно использовать Солнце .солнечный луч...🇱🇷🌍

Bro i really appreciate you because i just tried this in my country but i failed nd i watch ur video today nd feel it is outstanding please update ur page with latest videos nd also provide ur insta id so we support u nd stay attract with u 🎉💯💯

@JohnSmith-egri

2 жыл бұрын

THANKS, I'm working on it

Hi John, a great video. A good step to earn responsibly. What happens to carbon that is left? Where to you supply it or how do you dispose it off?

@JohnSmith-egri

2 жыл бұрын

We turn it into pavement tiles.

@iradqulizepo1672

2 жыл бұрын

Super cool... I need those structure plans... For my car fuel

@JohnSmith-egri

2 жыл бұрын

@@iradqulizepo1672 contact me on WhatsApp

@ibrahimconte105

Жыл бұрын

@@JohnSmith-egri hi John please can I have your WhatsApp number

@JohnSmith-egri

Жыл бұрын

@@ibrahimconte105 +231776261258

Can I ask a Question.? What if they solidified the plastic that you used as Gasoline . There would be a problem in a auto?

I wanted to ask does the refined product from the waste plastic make the distilled gasoline and diesel smell like gasoline and diesel as they are when refined from crude oil. As the smell of gasoline and diesel are undeniable chemical markers as to the compounds they are?

If you buy plastic from scrapers then it will be profitable or not?? to use fuel into vehicles is it necessary to refine or distillation?? Are you interested to work in india??

Thanks bro.

Good job❤

How u burn the plastic!? With tress fire or with solar panels and bateires

That's better than being a cannibal

Fantastic Great Man

How do you control the octane

Good job but at the end you use biodiesel or unleaded petrol (gasoline)? Thank youe

Would work flawless in an old tractor....

This amazing and i have never seen a such of simple system can we talk about it more?

@JohnSmith-egri

Жыл бұрын

Yes, you're welcome. Contact me on WhatSApp +231776261258

@nanaabenaamponsah

Жыл бұрын

@@JohnSmith-egri i went to start this project too . please help me

@JohnSmith-egri

Жыл бұрын

@@nanaabenaamponsah okay

Tell me one more time where the gas came from..

I went to start that project . please can you help with that?

Theirs a guy that showed how do this on youtube over 10 years ago.

Am happy this that this idea is been used across the world...but the biggest problem is that in some country's you need Meniral or petroleum licence to produce this product's...i have a company we looking to do the same but the problem is regulation in South Africa.

@mysticjaarse

2 жыл бұрын

I'm also interested in this and I'm South African. I was studying SA's fuel industry and I saw that one needs a licence to sell fuel. You can apply for fuel retailing if your fuel is good I think.

@Spacekriek

2 жыл бұрын

@@mysticjaarse Just don't tell the neighbours. ;)

@josephsennengmafatle3365

2 жыл бұрын

Yes one can apply for Retail or Wholesale Licence...

What’s the process??

I am very impressed on your achievements. I would also like to get in contact with you.

@JohnSmith-egri

Жыл бұрын

Hi thanks for the comment, you can contact me on this whatsapp number: +231776261258

Zajebiscie dobra robota nie tylko dla srodowiska ale idla ciebie Johan bo taniej pa Kris zPolski

Wow........... Can you explain how to make the apparatus

Badass

That's a 5 gallon jug of gasoline he's lifting and pouring into the funnel into that gas tank.. 56 lb.. how strong is this guy?

@kaseekendebenedict4857

Жыл бұрын

Petro is not heavy

Great chemistry if I won't learn can you teach me

How do you do it

How you did it ?

How did you make it bro

It need to be tested make sure it's not snake oils

I hope the temperature u gt is solar or from wind and not by cutting trees..

The method of containing, dispensing, managing the fuel is terrible. The actual making of the equipment and processing step by step would be interesting. I guess there is a major factor of working with available resources but the impact of spilling so much around and getting it on your skin could have such dire consequences.

You zre the boss all prod8ct for you

lovely

Beautiful

Super schlauer Mann

amazing

what quality is the fuel? diesel espacially.

What's the conversion rate? I'm very interested, but not understanding the method of process, looks like just Cooking it in a pressure cooker and distillation of the smoke/vapor.

@teahaul7897

2 жыл бұрын

plastic usaually converts about 90% weight so 1000 lbs of plastic makes 900 lbs of crude oil and the crude oil is refined down to the different stages of fuel just like in a bigoil refinery. Big oil is hiding this info. most people think plastic is waste. plastic is gold

@cranfillnathan7411

2 жыл бұрын

@@teahaul7897 okay, that's helpful, but is there a way to know how much it needs cooked so it doesn't solidify when cool? There's very few videos or instructions on this right now.

How do I contact you.