My first time using Plasti dip. I thought I would try it on my laptop before I do anything on the car.
Жүктеу.....
Пікірлер: 122
@jatindersinghbhatti43089 жыл бұрын
he sounded very sad at the end...
@clintonreed910 жыл бұрын
Next time when applying a bright blue to a black laptop is putting down a couple coats of white on. that will make it where the blue is brighter and wont take 50+ coats
@SWFCite
4 жыл бұрын
@@max4865 your base cost affects the final colour
@max4865
4 жыл бұрын
cost?
@saadomar1101
4 жыл бұрын
@@SWFCite cost man >? cost ? huuunhh !!??
@echangwang18217 жыл бұрын
Thank you for not putting super loud obnoxious music over the video.
@stefantrajkov908510 жыл бұрын
Once you are done with the white, make sure to let it dry completely before applying the blue. Good luck!
@bardos4 жыл бұрын
What did you use to remove the paint from the acer emblem?
@abuavictor4329
2 жыл бұрын
I wanted to ask either
@Pennicito7 жыл бұрын
lol, stumbled on your vid as I am looking to repaint my acer too. Good shade of blue.
@stefantrajkov908511 жыл бұрын
I don't know if spraying down made a difference but there was clumps because the can was cold. The edge started to come off after rubbing on surfaces while I was using it, so I peeled it off.
@joed27496 жыл бұрын
the finished part looks like it was made from a carbon fiber vinyl sticker. lmaooo
@ecnebiefe996
3 жыл бұрын
yes, it is, check the corners of the laptop, this video is totally a lie.
@Anothergames8 жыл бұрын
Really beautiful man!
@hyun80810 жыл бұрын
Hey how do you get a lighter shade of blue with this one ?
@GravityGamerXCII9 жыл бұрын
He should have painted it white, then blue that way it doesnt come out so dark.
@iNarwhaled11 жыл бұрын
how much time did you wait in between each coat?
@jerryx200010 жыл бұрын
how is the state now? Any scratches?
@atharalishah91466 жыл бұрын
VERY NICE IDEA.........VOW!!! I LIKE IT
@ZacharySound3 жыл бұрын
I know this is a very old video but I think it looks good..
@BIGNASTY-my1pj8 жыл бұрын
what modle was your laptop?
@GTXNate11 жыл бұрын
I think that it turned out great! :D
@stefantrajkov908510 жыл бұрын
You can try 1 or 2 coats of white underneath it. I did that with green in another one of my videos.
@hyun80810 жыл бұрын
Oh I think I'll just use white as base paint,like 3 coats and maybe 2 coats of blue so its ligther,since they're the same paint after all.
@stefantrajkov908511 жыл бұрын
I find plasti dip is quite a bit easier to use. Just do lights coats and overlap your pattern about 50%.
@stefantrajkov908511 жыл бұрын
I waited 30 minutes between each coat.
@enriquesoteldo74328 күн бұрын
how do you clean the logo after painting?
@ThePsphakr11 жыл бұрын
How many spraypaint cans did it take to paint your car?
@newazkhan3055 жыл бұрын
can you tell me It's colour code??
@cayhanaydin69976 жыл бұрын
Krom yazıyı nasıl temizlediniz
@faridwakim8 жыл бұрын
Yo stefan what is the laptop you used in this video, because i have an acer 5742 (close to this one) and it has a grooved cover like the one in this video and i was wondering if i tried to spray painted it with normal paint, will it ruin the paint? Because i dont have plasti dip and i am not sure if paint shops have them.
@stefantrajkov9085
8 жыл бұрын
+Farid Nicolas Wakim Painting it would be a more permanent thing to do. You can't just take it off when you want. It is also a lot more involved and required sanding, prepping and a more careful application. You also might need to spray down primer or clear coat depending on the paint you choose and the type of finish you are looking for.
@Kcimor786 жыл бұрын
I got white cans and thankfully its "matte", not shiny, will look great. I never say i buy expensive things, what i say is that they are expensive FOR ME cuz im broke, thats different!! Now have to decide if i should go coolermaster or corsair on the fans, CM would save me money, but corsair will look better, not sure.
@blacksteak7676 жыл бұрын
No se despega o se raya o algo?
@asmsk8911 жыл бұрын
how do u think this would turn out if i plasti dip my keyboard keys? Obviously I would remove them 1st.
@sandrarg64018 жыл бұрын
is it safe for the keyboard coverage? I'd like to paint it
@TroyGrimes
8 жыл бұрын
+Sandra Rg fi your saying you want to paint the keyboard take all the keys off then spray each one individually
@hyun80810 жыл бұрын
Yeh thanks :D
@danielsarntzen11 жыл бұрын
Did you use more than one can? It looks really good!
@nopowerlaboratory7 жыл бұрын
beautiful lap top only one color useing? that is the color
@maztergee6 жыл бұрын
good job
@Edman_797 жыл бұрын
Nice work. Ragarding the edges - I guess it would be better to remove the lcd cover and dip it separately. The removal is rather simple.
@larmishing
7 жыл бұрын
Edman or spend $10 and get a skin or shell for the laptop
@ardonitron2871
4 жыл бұрын
Tanner 1126 It’s kinda hard to get a skin for a laptop. some laptops aren’t very popular so they have no skins available.
@amant91969 жыл бұрын
30 latas después ya pudo pintar toda la tapa de la laptop.
@worldofz006 жыл бұрын
World Rally Blue right there!
@stefantrajkov908511 жыл бұрын
I used about 3/4 of a can
@joopvanbree39548 жыл бұрын
how did the cote hold up? i'm thinking of plasti dipping my laptop but i take it with me in my backpack almost daily, it has a seperate compartiment for the laptop but still. dont want the dip to scratch or come lose after a few weeks or months.
@stefantrajkov9085
8 жыл бұрын
+Joop van Bree I never tried putting in in a backpack but I would assume that the rubbing might start lifting the edges of the plasti dip.
@joopvanbree3954
8 жыл бұрын
+Stefan WRX okay thanks. Probably going to give this a try in a few weeks.
@EBCorporations
8 жыл бұрын
Curious, how did it go?
@ivanparada54867 жыл бұрын
It's not easier to put a vinyl on it than crazy
@isaiasdossantos14310 жыл бұрын
How did you got the logo "clean"again?
@timpos546
10 жыл бұрын
I guess he cut around the letters and peeled of the Plasti dip :)
@GabrielMillerd
10 жыл бұрын
exacto knife here and there and it peels off easy
@NickHarmel
10 жыл бұрын
***** nope, it's really easy, literally just rub it hard and peel and it comes off.
@utkarshpaliwal7222
6 жыл бұрын
Just sand it down with a 5000 grade sand paper
@june-ih1es7 жыл бұрын
Hey Stefan^^ how long did the plasti-dip last? also, did you carry it in a bag or just so? I already asked this on /r/plastidip but maybe you know an answer, I also want to dip the inside, but there are some deep holes(3mm) what material would you recommend for filling these? After that I though, I just repolish and dip it? Thanks! :D
@gustavosalinas17907 жыл бұрын
No sé, pero no te creo. :-p
@stefantrajkov908511 жыл бұрын
If applied correctly, there should be no streaks.
@kareemlondres37542 жыл бұрын
Good job bro, 👍
@samuelnedelec199 Жыл бұрын
bonjour existe t-il différentes peinture de couleurs d'ordinateur portable dans le commerce voir des peinture phosphoressentes qui se voie dans le noir de la nuits ? merci ++
@BIGNASTY-my1pj8 жыл бұрын
what modle is your Acer laptop beacuse I'm getting one from my friend and he doesn't know what modle it is but it looks exactly like yours
@stefantrajkov9085
8 жыл бұрын
+BIGNASTY 1000 I don't remember what model that laptop was but Acer has used that style casing for many models in the past.
@jainersonacevedo3589
7 жыл бұрын
hola brother esto quita rayas
@ThatFirstBaseMan9 жыл бұрын
I need help. I did this yesterday with my girlfriend and we did like 4-5 HEAVY coats of black and it looks awful right now. Keep in mind that we didn't go THAT heavy like making it drip each time, just making it wet. The first coat i guess we should've only made really light and then the rest of the coats heavy. I don't know. We did it in my garage with the door open for ventilation since we don't have face masks and it got loads of dust and small pieces of grass on it. it looks bad. Any help on how to do it for the next time we try? probably gonna do black again and then sometime do blaze orange or green. Any tips for the matte black though?
@7stefan7vn
9 жыл бұрын
Keep your coats fairly light. Do many coats for durability and keep it in a clean place. Make sure you clean it nicely before you apply plasti dip. Also if you must keep a door open, get it as far away from the doorway as possible.
@ThatFirstBaseMan
9 жыл бұрын
okay sounds good. i think i will do it in my screen room next time and use some more glass cleaner and a microfiber cloth to clean it
@robinrai4973
9 жыл бұрын
Lots of thin coats is far better than a few thick coats.
@unluckynumbersleven
8 жыл бұрын
+ThatFirstBaseMan the first coat thin is always good as a tack coat, depending on the surface (i always do wet coats, just not to the point of runny) but towards the end you will want to use heavy, wet coats or you'll have texture...it wont be the flat, matte black you want, rather textured, kind of like rhino liner.
@czarinajoypena77164 жыл бұрын
did you sand your laptop first? or directly applied the paint?
@stefantrajkov9085
3 жыл бұрын
No sanding.
@Fareke26 жыл бұрын
Dope
@AayZeeHacks3 жыл бұрын
how do you removed the paint from acer logo the final product is a proper coloured skin not painted
@stefantrajkov9085
3 жыл бұрын
You just peel that section off
@AayZeeHacks
3 жыл бұрын
@@stefantrajkov9085 that's ok but you didnt show us the tape or sticker you pasted on the logo and just started painting . By the way thanks for replying
@stefantrajkov9085
3 жыл бұрын
@@AayZeeHacks No need to tape or sticker. Plasti dip will separate at hard edges, if anything, a little persuasion with a sharp blade might be needed.
@AayZeeHacks
3 жыл бұрын
@@stefantrajkov9085 ok I liked the video and final result was amazing
@jainersonacevedo35897 жыл бұрын
una pregunta esto quita rayas
@balderoine7 жыл бұрын
I have the same laptop
@o_xtanjax_o7674 жыл бұрын
hm like no one ever takes their laptops apart to spray
@motoXcR8 жыл бұрын
masks it off outside, paints it inside... subbed
@SeanHyland
7 жыл бұрын
He likes to live dangerously
@dans816710 жыл бұрын
What kind of pizza is that?
@akshayyadu4391
3 жыл бұрын
Pepperoni with blue cherry
@Kimbelina8 жыл бұрын
Is this safe for the laptop? It doesn't damage it?
@7stefan7vn
8 жыл бұрын
+LadyCakes AJ This is completely safe to use on a Laptop cover. It does no damage at all and can be taken off at any time.
@Kimbelina
8 жыл бұрын
What if I just sprayed it right on top of the laptop? I can't find any covers for my laptop (Unless I want crocodile leather, which um no lmao)
@genco2943 жыл бұрын
good
@BnMohsnn5 жыл бұрын
Waaaw
@jhon8 жыл бұрын
I Liked!
@sk8infreek11 жыл бұрын
10 to 15 is fine also
@Samullarhymes5 жыл бұрын
I tried that with my MacBook but I didn't love the results ☹️
@anonnadiary003 жыл бұрын
Vai spay nam ki
@cptv41796 жыл бұрын
mate...................
@DeyseCarol2 жыл бұрын
Nossa ficou muito bonito
@bryceanglin622210 жыл бұрын
I was hoping the can exploded when you heated it up.
@DxBlack
9 жыл бұрын
Bryce Anglin Because a blow dryer can heat a can to over 300F/148C like a fire can... Go fuck yourself.
@jeevankrishna23662 жыл бұрын
Now tell me how many of u have dare to do this🤪
@teimuhevonen79575 жыл бұрын
I don't know can't believe you
@HopeAbstracts10 жыл бұрын
Do you have to take the laptop apart? And is there any risk of it failing
@stefantrajkov9085
10 жыл бұрын
Did not have to take it apart. Just cover any area you don't want to plasti dip. Make sure you clean the surface well
@Raasvlog3 жыл бұрын
First use white spary then use blue one
@shahanazparvin37906 жыл бұрын
nana light deben
@MrGrowingShit9 жыл бұрын
ja so is gut! immerschön im kreutzkang :)
@GabrielMillerd10 жыл бұрын
/* warning about using a mask here */
@daadirmeeteofficialchannel8746 жыл бұрын
Woow soomalia
@rosanapaula52657 жыл бұрын
😲😲😲😲
@vascopaulo69169 жыл бұрын
podia ficar melhor
@LamGorYun5 жыл бұрын
Too many coats
@albertoraulosores70593 жыл бұрын
SON DOS COSAS DIFERENTES JAMAS TE QUEDA ASI CON UN AEROSOL...JAJAJAJAJAJAJAJAJ
@supermancarlean2 жыл бұрын
Otro mudo
@danielchavezviruez6103 жыл бұрын
hubieras gastado 5 $ en usar un adhesivo en vez de 15$ usando plastidep. LOL
Пікірлер: 122
he sounded very sad at the end...
Next time when applying a bright blue to a black laptop is putting down a couple coats of white on. that will make it where the blue is brighter and wont take 50+ coats
@SWFCite
4 жыл бұрын
@@max4865 your base cost affects the final colour
@max4865
4 жыл бұрын
cost?
@saadomar1101
4 жыл бұрын
@@SWFCite cost man >? cost ? huuunhh !!??
Thank you for not putting super loud obnoxious music over the video.
Once you are done with the white, make sure to let it dry completely before applying the blue. Good luck!
What did you use to remove the paint from the acer emblem?
@abuavictor4329
2 жыл бұрын
I wanted to ask either
lol, stumbled on your vid as I am looking to repaint my acer too. Good shade of blue.
I don't know if spraying down made a difference but there was clumps because the can was cold. The edge started to come off after rubbing on surfaces while I was using it, so I peeled it off.
the finished part looks like it was made from a carbon fiber vinyl sticker. lmaooo
@ecnebiefe996
3 жыл бұрын
yes, it is, check the corners of the laptop, this video is totally a lie.
Really beautiful man!
Hey how do you get a lighter shade of blue with this one ?
He should have painted it white, then blue that way it doesnt come out so dark.
how much time did you wait in between each coat?
how is the state now? Any scratches?
VERY NICE IDEA.........VOW!!! I LIKE IT
I know this is a very old video but I think it looks good..
what modle was your laptop?
I think that it turned out great! :D
You can try 1 or 2 coats of white underneath it. I did that with green in another one of my videos.
Oh I think I'll just use white as base paint,like 3 coats and maybe 2 coats of blue so its ligther,since they're the same paint after all.
I find plasti dip is quite a bit easier to use. Just do lights coats and overlap your pattern about 50%.
I waited 30 minutes between each coat.
how do you clean the logo after painting?
How many spraypaint cans did it take to paint your car?
can you tell me It's colour code??
Krom yazıyı nasıl temizlediniz
Yo stefan what is the laptop you used in this video, because i have an acer 5742 (close to this one) and it has a grooved cover like the one in this video and i was wondering if i tried to spray painted it with normal paint, will it ruin the paint? Because i dont have plasti dip and i am not sure if paint shops have them.
@stefantrajkov9085
8 жыл бұрын
+Farid Nicolas Wakim Painting it would be a more permanent thing to do. You can't just take it off when you want. It is also a lot more involved and required sanding, prepping and a more careful application. You also might need to spray down primer or clear coat depending on the paint you choose and the type of finish you are looking for.
I got white cans and thankfully its "matte", not shiny, will look great. I never say i buy expensive things, what i say is that they are expensive FOR ME cuz im broke, thats different!! Now have to decide if i should go coolermaster or corsair on the fans, CM would save me money, but corsair will look better, not sure.
No se despega o se raya o algo?
how do u think this would turn out if i plasti dip my keyboard keys? Obviously I would remove them 1st.
is it safe for the keyboard coverage? I'd like to paint it
@TroyGrimes
8 жыл бұрын
+Sandra Rg fi your saying you want to paint the keyboard take all the keys off then spray each one individually
Yeh thanks :D
Did you use more than one can? It looks really good!
beautiful lap top only one color useing? that is the color
good job
Nice work. Ragarding the edges - I guess it would be better to remove the lcd cover and dip it separately. The removal is rather simple.
@larmishing
7 жыл бұрын
Edman or spend $10 and get a skin or shell for the laptop
@ardonitron2871
4 жыл бұрын
Tanner 1126 It’s kinda hard to get a skin for a laptop. some laptops aren’t very popular so they have no skins available.
30 latas después ya pudo pintar toda la tapa de la laptop.
World Rally Blue right there!
I used about 3/4 of a can
how did the cote hold up? i'm thinking of plasti dipping my laptop but i take it with me in my backpack almost daily, it has a seperate compartiment for the laptop but still. dont want the dip to scratch or come lose after a few weeks or months.
@stefantrajkov9085
8 жыл бұрын
+Joop van Bree I never tried putting in in a backpack but I would assume that the rubbing might start lifting the edges of the plasti dip.
@joopvanbree3954
8 жыл бұрын
+Stefan WRX okay thanks. Probably going to give this a try in a few weeks.
@EBCorporations
8 жыл бұрын
Curious, how did it go?
It's not easier to put a vinyl on it than crazy
How did you got the logo "clean"again?
@timpos546
10 жыл бұрын
I guess he cut around the letters and peeled of the Plasti dip :)
@GabrielMillerd
10 жыл бұрын
exacto knife here and there and it peels off easy
@NickHarmel
10 жыл бұрын
***** nope, it's really easy, literally just rub it hard and peel and it comes off.
@utkarshpaliwal7222
6 жыл бұрын
Just sand it down with a 5000 grade sand paper
Hey Stefan^^ how long did the plasti-dip last? also, did you carry it in a bag or just so? I already asked this on /r/plastidip but maybe you know an answer, I also want to dip the inside, but there are some deep holes(3mm) what material would you recommend for filling these? After that I though, I just repolish and dip it? Thanks! :D
No sé, pero no te creo. :-p
If applied correctly, there should be no streaks.
Good job bro, 👍
bonjour existe t-il différentes peinture de couleurs d'ordinateur portable dans le commerce voir des peinture phosphoressentes qui se voie dans le noir de la nuits ? merci ++
what modle is your Acer laptop beacuse I'm getting one from my friend and he doesn't know what modle it is but it looks exactly like yours
@stefantrajkov9085
8 жыл бұрын
+BIGNASTY 1000 I don't remember what model that laptop was but Acer has used that style casing for many models in the past.
@jainersonacevedo3589
7 жыл бұрын
hola brother esto quita rayas
I need help. I did this yesterday with my girlfriend and we did like 4-5 HEAVY coats of black and it looks awful right now. Keep in mind that we didn't go THAT heavy like making it drip each time, just making it wet. The first coat i guess we should've only made really light and then the rest of the coats heavy. I don't know. We did it in my garage with the door open for ventilation since we don't have face masks and it got loads of dust and small pieces of grass on it. it looks bad. Any help on how to do it for the next time we try? probably gonna do black again and then sometime do blaze orange or green. Any tips for the matte black though?
@7stefan7vn
9 жыл бұрын
Keep your coats fairly light. Do many coats for durability and keep it in a clean place. Make sure you clean it nicely before you apply plasti dip. Also if you must keep a door open, get it as far away from the doorway as possible.
@ThatFirstBaseMan
9 жыл бұрын
okay sounds good. i think i will do it in my screen room next time and use some more glass cleaner and a microfiber cloth to clean it
@robinrai4973
9 жыл бұрын
Lots of thin coats is far better than a few thick coats.
@unluckynumbersleven
8 жыл бұрын
+ThatFirstBaseMan the first coat thin is always good as a tack coat, depending on the surface (i always do wet coats, just not to the point of runny) but towards the end you will want to use heavy, wet coats or you'll have texture...it wont be the flat, matte black you want, rather textured, kind of like rhino liner.
did you sand your laptop first? or directly applied the paint?
@stefantrajkov9085
3 жыл бұрын
No sanding.
Dope
how do you removed the paint from acer logo the final product is a proper coloured skin not painted
@stefantrajkov9085
3 жыл бұрын
You just peel that section off
@AayZeeHacks
3 жыл бұрын
@@stefantrajkov9085 that's ok but you didnt show us the tape or sticker you pasted on the logo and just started painting . By the way thanks for replying
@stefantrajkov9085
3 жыл бұрын
@@AayZeeHacks No need to tape or sticker. Plasti dip will separate at hard edges, if anything, a little persuasion with a sharp blade might be needed.
@AayZeeHacks
3 жыл бұрын
@@stefantrajkov9085 ok I liked the video and final result was amazing
una pregunta esto quita rayas
I have the same laptop
hm like no one ever takes their laptops apart to spray
masks it off outside, paints it inside... subbed
@SeanHyland
7 жыл бұрын
He likes to live dangerously
What kind of pizza is that?
@akshayyadu4391
3 жыл бұрын
Pepperoni with blue cherry
Is this safe for the laptop? It doesn't damage it?
@7stefan7vn
8 жыл бұрын
+LadyCakes AJ This is completely safe to use on a Laptop cover. It does no damage at all and can be taken off at any time.
@Kimbelina
8 жыл бұрын
What if I just sprayed it right on top of the laptop? I can't find any covers for my laptop (Unless I want crocodile leather, which um no lmao)
good
Waaaw
I Liked!
10 to 15 is fine also
I tried that with my MacBook but I didn't love the results ☹️
Vai spay nam ki
mate...................
Nossa ficou muito bonito
I was hoping the can exploded when you heated it up.
@DxBlack
9 жыл бұрын
Bryce Anglin Because a blow dryer can heat a can to over 300F/148C like a fire can... Go fuck yourself.
Now tell me how many of u have dare to do this🤪
I don't know can't believe you
Do you have to take the laptop apart? And is there any risk of it failing
@stefantrajkov9085
10 жыл бұрын
Did not have to take it apart. Just cover any area you don't want to plasti dip. Make sure you clean the surface well
First use white spary then use blue one
nana light deben
ja so is gut! immerschön im kreutzkang :)
/* warning about using a mask here */
Woow soomalia
😲😲😲😲
podia ficar melhor
Too many coats
SON DOS COSAS DIFERENTES JAMAS TE QUEDA ASI CON UN AEROSOL...JAJAJAJAJAJAJAJAJ
Otro mudo
hubieras gastado 5 $ en usar un adhesivo en vez de 15$ usando plastidep. LOL
fack video
fake