Plasma Cutter PARKSIDE PPS 40 B2 (149€) - Unboxing and Test
Тәжірибелік нұсқаулар және стиль
Unboxing and testing the cheapest plasma cutter I can afford. Bought it in LIDL(Slovenia) for 149€. It's suprisingly good... for the money. All you need is an air compressor and you're set to go. LIDL's plasma cutter will easily cut steel to 6 or maybe 8 mm, thicker than that I wouldn't recommend. I also tested cutting aluminum, brass and stainless steel(INOX). Enjoy!
Пікірлер: 1 600
If you want to make a donation or sponsor a video, you can contact me here: sponsored.unboxing@gmail.com
@abdenour3209
3 жыл бұрын
kzread.info/dash/bejne/aa2Oq7izZty0qLA.html&ab_channel=abdeNour
@sandumircea5719
2 жыл бұрын
@@abdenour3209 vreau sa cumpar
@sandumircea5719
2 жыл бұрын
Cum se face comanda
@najibzghayoud5624
Жыл бұрын
How match
@Zodliness
9 ай бұрын
I bought one of these today and I am amazed at it's cutting performance for the small size and price, making it very portable and useful for running on a small generator or inverter out in the field. Worthy of note: My variant has an 'integrate' air compressor, some models don't. I paid £149.99 and in my humble opinion, it's worth every penny, for an impulse purchase from Lidl. They're going pretty quickly too and they have a limited amount in stock per outlet. Thanks for sharing this video, it helped in my decision to purchase one. 👍
Вот каким должен быть обзор !!! Чётко по делу и без лишних базаров!!!
@endprg6477
2 жыл бұрын
Иногда и комментарии нужны...
You just made me buy a plasma cutter for reason
@MakeAndTest
4 жыл бұрын
You did the right thing
@shivarajuns3679
3 жыл бұрын
What's the price 🤔🤔
@rickghracing8839
3 жыл бұрын
@@shivarajuns3679 its in the title, €149
Thank you for this detailed video - showing the steel thickness before each cut is really helpful
@MakeAndTest
3 жыл бұрын
I'm glad someone appreciates this. Watch my latest video of another plasma cutter!
@paristo
2 жыл бұрын
@@MakeAndTest Thank You as well, I got this plasma cutter solely based your video. Lidl was selling it now for 169€ and I don't need it for more than maybe couple times a year for small things, and for that price it is more than I ever need. When commonly in other stores the models starts at 450€ up to 700€ for cheap models, that is too heavy price for capability get metal cut for required shape when it is so.
Now I will have to buy one next time i see it, Thanks!
Wow the quality of this unboxing is incredible. 😂 The way you slide everything out of the box and the camera angles
@abedalgaffar2250
2 жыл бұрын
رايد بلازما اشكد السعر
I want One and Will buy as soon as arrive at Lidl Portugal. Thanks for the video and explanation tought was more complicated but seems just need compressed air
Thanks for the video! I just bought one of these, but hadn´t been able to test it yet.
Super video. Alles gut dar gestellt. Ich habe mir vor zwei Tagen den Nachfolger gekauft. Ich war schon am überlegen es wieder um zu tauschen weil ich mir nicht sicher war, ob das Gerät was taugt. Jetzt behalte ich es. Diese tolle Video hat mich jetzt überzeugt. Danke für das Video 👍✌️
It works much better than I expected! I hope my local Lidl here in the US will sell those soon!
@leonardmcdermott7703
4 жыл бұрын
Have you purchased items from Lidl before Lee? Here in Ireland there are some great bargains to be had. I bought a mig welder from Lidl for €99, it is amazing.
Симпатичный и дизайнипроодуман и комплектующие неплохие ..видно что аппарат руками сделанный
Very good review, clear and concice, no words needs
Hi Enjoyed your video. Are the cuts you make testing the tip on the actual workpiece or are you holding it just a fraction above with the support of your hand? Thanks for helping.
Кто-нибудь отберите у Него резак , а то он начал полезные вещи портить.
@jackblack6414
4 жыл бұрын
😁
@user-zq6gq3pm4i
4 жыл бұрын
😂👍
@MakeAndTest
4 жыл бұрын
Я только начал. Следующее видео будет очень интересным.
@den8532
4 жыл бұрын
😂
@user-zq6gq3pm4i
4 жыл бұрын
@@MakeAndTest здравствуйте, ну и как аппарат? Хорошо режет?
just one word: WOW !
WOW I didn't expect it to be that good.
Thank you for detailed presentation. It would probably do better on thicker material with bigger compressor, it seems to run out of force.
This is one of those things I don’t need but really want lol, and for that price it’s very tempting..
@lolmoreland3605
3 жыл бұрын
lol go on dude treat yourself same here
@steveflatman
3 жыл бұрын
You'll be surprised how useful they can be. This unit is a bit 'hit & miss' on thicker material, but on stuff upto about 5mm mines been brilliant, especially if you lash up a few jigs, such as ones for cutting circles and tracking templates. I've turned an old gas cannister and a sheet of metal into an R2-D2 log burner which sold for about 8x the cost of the plasma cutter and welder so left me with the units for free and about £500! It's also been useful for modifying an old set of gates and literally saved me days (not to mention effort) on my ongoing campervan conversion project. I've been nothing short of amazed by the quality for such a low price!
@Ryderman2000
2 жыл бұрын
@@steveflatman oh dude that's such a great idea for a project ! I may have to have a crack at making one myself ! :D
@steveflatman
2 жыл бұрын
@@Ryderman2000 The campervan or the gas bottle R2-D2?
@Ryderman2000
2 жыл бұрын
@@steveflatman the R2-D2 gas bottle project. I heard they make good pot belly stoves, and ornamental pig garden decorations haha
Нищтяк! Появлось новая мечта
@user-vl8lm2wc9j
4 жыл бұрын
😩
Excelente herramienta el plasma, muy practica
nice and interesting, we would like to see more
Nice video. But I'd like to know what settings you used for the various thicknesses. What amperage, air pressure.
Brutaaaalll!!! Quiero uno 😭😭😭😭!!!!
Que maravilla.Nunca había visto una máquina como ésa . Muy buenos trabajos de demostración .
Sharp n clean👍
@MakeAndTest
4 жыл бұрын
Thats the way.
I don't know but i love welding. Never done single welding in my life.
@sharzanco
3 жыл бұрын
try weld you will love it
@someone-gb2ec
3 жыл бұрын
you must try 👍
Powerplasma cutters are the best. I really make good use of my everlast plasma cutter. You are going to have a lot of fun with that.
@MakeAndTest
4 жыл бұрын
Yeah, I'll mostly use it for sheet metal up to 3 mm. Make a couple of stencils for radiuses and holes and it'll be lika a CNC haha
Très bien ! Il a l'air de valoir le coup !
Tremendously informative video Sir. Thankyou.
€119 in Lidl in Ireland, bought it but havent tried it yet.
Классная вещь. Во сколько обойдётся?
Maravillosa herramienta. Gracias por el video!!! Estuvo genial
Beautiful machine
Hello my friend We asking where we can buy this machine and it is need aircomperson or no need Waiting your urgent reply
Looks like a nice machine but can't find online
Exelente trabajo amigo 👍😃🙋♂️
Why am I watching plasma cutter videos? Well anyways looks like it turned out ok for at home stuff. Kudos. 👍
У меня такой же. По кузавщине вообще кайф.
@user-ru5cr1ob7d
3 жыл бұрын
За скоко и где брал?
@user-wh8rr9zk7c
3 жыл бұрын
@@user-ru5cr1ob7d в южно сахалинске, а привазили с кореи.
@wubenny6777
3 жыл бұрын
@@user-ru5cr1ob7d Jiangsu Boda Plasma is the biggest Hypertherm OEM manufacturer from China. we make upto 600 cutting machines (including the gantry, cutting table, rails, dust connectors)per year. for more details, Please contact benny.wu@bnkmachinery.com
A really interesting video, thank you. I only hope Lidl will be selling the plasma cutter here in France.
@MakeAndTest
4 жыл бұрын
Thanks, glad you like it. I think it sells twice a year. I was waiting for it half a year and when it came to stores they were all sold in like 2 days. Like toilette paper these days.
@tonyhillyard1613
4 жыл бұрын
@@MakeAndTest That is very funny!!!!!
Beautiful welding machine and nice work
Добрый день, данный плазморез довольно интересный, подойдёт для автослесаря так и для домашнего использования, отрезать лист, трубу! А насчёт того, чтоб смазывать маслом поверхность или колпачок (защитный экран) не рекомендую! Да, первое время колпачок не прелипает но современем налипают окалины и есть возможность привариться до металла, знаю по личному опыту, работаю боле 5 лет на ручном плазморезе HYPERTHERM PAWERMAX 105!
I have tested the parkside perforator, it just worked 2 days. I bought a bosch, 3 years after, I still use it....
@samirazarzar6279
3 жыл бұрын
I bought a parkside perforator 8 years ago and it still works fine. Only its box has broken.
OK! What was your verdict and how thick was that rusty plate you cut through???
@MakeAndTest
4 жыл бұрын
11 to 12mm thick. I couldn't do it. But someone mentioned it might go if you use pure oxygen instead of just compressed air. And if you lift the torch 1mm off the surface. I'll try someday and let you know.
@paulirumbin1541
4 жыл бұрын
@@MakeAndTest user error! You go too fast and not steady movement!
Nice demo thanks
Top demais a máquina. Obrigado por apresentar.
Nice to see the different thicknesses. Thanks. Very instructive. Good to have a feel for the limits. The one thing I wonder about those Parkside tools is support, though. I looked for consumables (tips etc) for one of their welders and could not find anything. Is it better for the plasma cutter? If so, where do you get them? If not, are all those tools just expendables and throwaways when you need parts?
@MakeAndTest
3 жыл бұрын
I have the same problem. I cant find the tips. Someone said that they found them in some random online shop from china... Gotta do some more internet searching.
@colintinker7778
2 жыл бұрын
Just look up parts for AG60 plasma torch. They are the exact fit.
You have to wait the arc to cut before to go forward!
Very good product from lidl.. I'm from greece
Super nice machine plasma . ..ini sangat membantu perkerjaan ....🧑🏭👏👏👍👍
На 10ти милиметровом листе спешил ( полного продува небыло) с такой резкой будут сопла и катоды сгорать
@user-lm9xe3oc9t
4 жыл бұрын
Не сопла а аноды...
@Masterognennogoshva
4 жыл бұрын
@@user-lm9xe3oc9t вот именно, что в такой плазме сразу СОПЛО прогорит и, будет резать в бок
@user-lm9xe3oc9t
4 жыл бұрын
@@Masterognennogoshva Согласитесь,сопло в аноде?
@gorin4999
4 жыл бұрын
@@user-lm9xe3oc9t В катоде
@user-lm9xe3oc9t
4 жыл бұрын
@@gorin4999 не правда ваша,катод это штырь( если его так можно назвать), а АНОД наконечник с соплом...
Спасибі за обзор.Якщо є можливість зробіть обзор аккмуляторного інструмента
@MakeAndTest
4 жыл бұрын
kzread.info/dash/bejne/m2qCj8-kf9mXXdo.html
@skmovies9054
4 жыл бұрын
What price
@user-oy6qz1kp3j
3 жыл бұрын
@@MakeAndTest щщщл
I just saw a vid about the same cutter. The man demonstrate that it cuts 10 mm steel . Not so easy but he had a whole selection . Seems good enough . Are the power cables capabel for 40amp ? Reinhardt
i need a plasma cutter going to purchase this model due to your well made video
@MakeAndTest
3 жыл бұрын
Good to hear that sir. I hope you make the most out of it! :)
Плазменный станок с программным управление м вот это дело было бы😁
@MakeAndTest
4 жыл бұрын
это было бы прекрасно
Quanto custa a máquina?
Excellent videos bro
До 10мм сталь берет. Просто, а какой смысл что он на плите уголок срезал😊 если продольный рез не получается?
É os bicos de cerâmica há para manutenção
Так, компрессор у меня есть, надо брать.
@4ekist
4 жыл бұрын
Я вместо воздуха кислородом продувал))3 очка, КПД зашкаливает, 10 шинкует как огурцы и рез чистый
Классный плазморез.👍👍👍
Holy shit! Magic from the Lidl
@MakeAndTest
4 жыл бұрын
Yes indeed.
@Jandejongjong
4 жыл бұрын
They dont Sell it anny more:( was looking for one
What kind of gas did you use? Gas or oxygen?
@MakeAndTest
3 жыл бұрын
Just compressed air from air compressor.
Ein super Gerät, ich habe den Plasmaschneider auch im Einsatz (sieht man auch regelmäßig in Videos auf meinem Kanal). Viele Grüße Nico von Nico's Projects
Die 10mm Blech sind schon der Hammer.
رووعه ماكينة بلازما جميله جدا وعملية وسريعة هي دي العدد الصح تحياتي لكم
What's cost of plasma cutting parkside pps 40model in Indian rupees.
Отлично работает
Magical machine
У меня в гараже стоит профессиональный резак, новый продать не могу. 👍👍👍
3 дня спустя: срезал последнюю батарею и выход канализационной трубы, дорезаю отверстия в ложках, спасите меня...
Резачек держи перпендикулярно. Где будешь резать помаж маслом или любой смазкой И сопло тоже. И не спеши. Заметишь разницу.
@MakeAndTest
4 жыл бұрын
Thank you for your advice.
@555GROB555
4 жыл бұрын
Силиконовая смазка подойдёт?
@user-py8ll3vc7i
4 жыл бұрын
@@555GROB555 да, но само сопло надо чаще смазывать. Отработка дешевле😁(как то двусмысленный ответ получился)
@555GROB555
4 жыл бұрын
@@user-py8ll3vc7i благодарю за подсказку!!!
@Vit_Kh
4 жыл бұрын
@@user-py8ll3vc7i ну да, сопло лучше смазывать....
Ottima recensione, grazie
wow, plasma cutter is amazing . thanks
Хорошая вещь
5:00 you cut too fast, the sparks must go down because when they go up the material does not cut well and can destroy the nozzle in the cutter.
@MakeAndTest
4 жыл бұрын
I think I destroyed the nozzle yeah. Will try better technique next time.
Peço saber se essa máquina é possível soldar tig?
@MakeAndTest
3 жыл бұрын
No...its a plasma cutter not a welding machine. The other welding machine on my channel can tig weld.
Do you recommend this plasma Cutter? or any one used it. please advise ?thanks
Donde se.vende y cuanto cuesta
@MakeAndTest
4 жыл бұрын
LIDL 149€
Amazing, but still do not have medicine For coronavirus...😅😅😅
@peacebeuntoyou8934
4 жыл бұрын
Yes, it's called Nigella Sativa or Black Seed Oil. It's not only for Coronavirus.
Impressive!
Cái máy này cắt còn lẹ hơn gió đá. 👍Vĩnh Long.
Банкомата и сейфам хана!!!
@pohyist5219
4 жыл бұрын
Ага-нужен ещё -генератор,прицеп,компрессор!!!
Comprei uma essa semana estou testando ainda mais pelo pouco que usei e Boa. 10 mm ainda não cortei
@ataide2746
4 жыл бұрын
Boa noite ... Onde comprou ? E preço ?
@marcioribeiro6130
4 жыл бұрын
@@ataide2746 comprei na Florêncio de Abreu sao paulo 980 reais
@rabivimtchf
4 жыл бұрын
Qual é o tipo de gaz que é usado ? por outras , vivis em que país ? eu vivo em Angola
Ovo je nešto fantastično
Choose it but where got it ?
Where can I purchase a machine like this please comment back thank you very much very nice it works very well
@MakeAndTest
3 жыл бұрын
I bought it in Lidl
Great !! where can I find it at that price?
@gluc77
3 жыл бұрын
A Lidl Italia la compri a €129
You always cut. Doesn't merge with it?
Muy buena hace excelente trabajo
Интересно из под компрессора воздух используют или кислород?
@MakeAndTest
3 жыл бұрын
kompressor
@user-ol9ui3km4k
3 жыл бұрын
Макни в отработку! И продуй кислородом.....
Go slower on 10 mm plate, and add description on 5:45 that you actually cutting aluminium pipe, a lot of people dont know that plasma can cut it... good video. That plasma cutter can cut stainless steel 10 mm thick, and 12 mm cast iron as well...
@MakeAndTest
3 жыл бұрын
Thanks for the tip. I tried to make the video without talking so that anyone can understand it not just us western people who speak english. I'll try to make more informative tests and reviews. I'm not a native english speaker so it'll sound i little bit off. I really appreciate your feedback. It helps me a lot.
@borisloki5833
3 жыл бұрын
Can I cut 6mm thick stainless steel sheet with it.? Please reply?
Ótima máquina
Yes
Never saw that tool for sell in my country. Too bad. What country are you?
@robbypolter6689
4 жыл бұрын
Germany.
@drizler
4 жыл бұрын
I see a lot of Parkside stuff in Aldi food stores in Germany of all places. Not the ones in the US though.
@honestguy7764
4 жыл бұрын
Merlin Cat Parside is the Lidl brand for tools
You don't need to clean your steel. That's half the point. Sometimes with the earth, yeah, but it will cut through paint and dirt easily enough.
@MakeAndTest
4 жыл бұрын
Thanks for the advice. :)
very good job
is there a link to buy this welder from Amazon ?!
хорошее решение по конструкции резака,без этого кольца которое постоянно перегорает! а по поводу толщины то тут нужна сноровка!))
salut t as buse ne doit pas toucher le métal , 1 ou 2 mm
@MakeAndTest
4 жыл бұрын
Thank you for advice. I will try next time.
@tracker4014
4 жыл бұрын
@@MakeAndTest de rien autrement tu vas en user beaucoup des buses
In 1cm width, you has a very high speed of cutting viewing sparks. You have to have a right angle of gas and sparks.
@nicoleetoo
3 жыл бұрын
"The arc should exit material at a 15-20 degree angle opposite the direction of travel"
@nicoleetoo
3 жыл бұрын
Between -75º to -80º if you consider 0º the horizontal and -90º the perpendicular to the floor. Never sparks should go over 0º, the speed is to high.