Pipeline Welding (Mainline)

Ойын-сауық

The start of a new Pipeline. For the welding crew at least!
▼ FOLLOW ME ON INSTAGRAM AND X!!! ▼
/ xazazelx13
/ xazazelx13
#weld #welding #pipelinewelding

Пікірлер: 216

  • @kerryodjugo5464
    @kerryodjugo54647 ай бұрын

    Certainly one of the best professional video on KZread

  • @gunsgunsguns831
    @gunsgunsguns83110 жыл бұрын

    Many props to field welder. A friend of mine works the pipe line out of Wisconsin and I had a chance to work with him at another job and now my stick welding and vertical ups are better than they ever were before. Keep fryin.

  • @TheDuffmcgruff
    @TheDuffmcgruff11 жыл бұрын

    Dreaming of one day getting out of the Navy and getting my own rig and becoming a pipeliner! keep the videos coming!

  • @craftchick674
    @craftchick67411 жыл бұрын

    Thanks for your videos man. It`s like entering a new world for me. Keep it up, please.

  • @ryanerivez2055
    @ryanerivez205511 жыл бұрын

    true true, i like both, i love the gold lens their view is amazingly clear

  • @TorTor323
    @TorTor3237 жыл бұрын

    I'm itching to get into the field. My patience will be rewarded though. To all the welders out there be safe and lay some sexy beads for us who are still learning.

  • @theflylice
    @theflylice12 жыл бұрын

    awesome to watch, the only welding i do is brazing copper pipes on refrigeration and AC units, this looks a whole lot more fun. nice job

  • @ViralQuatre
    @ViralQuatre12 жыл бұрын

    Good job from France !

  • @10bandsgames69
    @10bandsgames696 жыл бұрын

    Hell yeah brother your bad ass with your trade. I’ve got a couple buddies that weld where all from Sherwood About 20 minutes from Little Rock

  • @howtowin.facts.7247
    @howtowin.facts.724710 жыл бұрын

    thank you for putting that here I felt like I was there!!

  • @hklwdr
    @hklwdr12 жыл бұрын

    1:00-2:13......WOW, i am speechless that person can do some serious welding, all you people out there that are welders know that going from flat to vertical to almost overhead is EXTREMELY difficult to do without repositioning yourself.....aweomse, i love pipeline welding. i wish that was my job.

  • @SOFOKANDO809
    @SOFOKANDO80911 жыл бұрын

    wow I am now a fan of you guys

  • @Brainmalfuction
    @Brainmalfuction12 жыл бұрын

    Nice work and cool vid your really layin it in nice

  • @gabeisguy
    @gabeisguy12 жыл бұрын

    The Miller elite is a great lid. I've owned two my new est is the digital. If your going to lay down the coin for one go digital. I wouldnt recommend it for a lot of out doors heavy use where it is subject to the elements. Though i"ve had mine out in some nice Alberta winters. but like i say a great lid for shop use.

  • @Fredmullegun
    @Fredmullegun12 жыл бұрын

    My eye's just got burned from the awesome.

  • @waltherchev1
    @waltherchev111 жыл бұрын

    Thanks for all the videos and do you

  • @jcogan6
    @jcogan610 жыл бұрын

    Hey man what motion do you use on the when you get on the bottom of the poor and do you turn the heat down when you get there

  • @xAZAZELx13
    @xAZAZELx133 жыл бұрын

    700,000 views as of today! Thank you to everyone who helped make that possible!

  • @victorhugogarciatorres4626
    @victorhugogarciatorres46266 жыл бұрын

    Very good welders

  • @Juninhosoldagem
    @Juninhosoldagem12 жыл бұрын

    Vocês são muito bons no que diz respeito a soldagem de dutos! valeu

  • @realismtube
    @realismtube10 жыл бұрын

    Hey thanks for uploading the video its great to watch :) i am 26 and have been learning to pipe weld for about 18months now. Can i ask if you have any tips for the root run with 6010hyp you see i struggle right at the bottom, the root is flush inside of the pipe.... everywhere else it has penetrated 1-2mm ? Do i need a slight increase in amps or you think maybe i just need to 'push it' in more? Any advice would be really helpfull

  • @realismtube
    @realismtube10 жыл бұрын

    Thanks for reply, i had a go today, root gap 2mm root face 2mm and increased the amps, it felt better had more control... But litterally 1inch right on the bottom...finished of flush inside of the pipe :@ Ill keep trying... will try a further increase in amps tomorow, and change the angle of electrode slightly. 90degrees to the pipe right at the bottom?

  • @malcolmcarter1450
    @malcolmcarter145011 жыл бұрын

    both m8, plus mma, depends on "wps" welding procedure specification, different applications have different tensile strengths with differing pressures

  • @nickschaefers1607
    @nickschaefers160710 жыл бұрын

    Good vid xAZAZELx13, lookin' forward to getting my rig on the mainline.

  • @saucedo5032
    @saucedo503211 жыл бұрын

    Big money. Nothing finer than a pipeliner.

  • @Stalli0nDuck
    @Stalli0nDuck12 жыл бұрын

    This will soon be my job! I can't wait to finish school and actually start welding!!

  • @Colorlife9

    @Colorlife9

    2 ай бұрын

    Arc welding is tiring

  • @glorbstah
    @glorbstah11 жыл бұрын

    Very interesting video sir, thanks for putting them up here :) Is it industry standard to weld everything downhill?

  • @xAZAZELx13
    @xAZAZELx139 жыл бұрын

    This mainline welding video of mine just rolled 350,000 views! Things are looking up! #Weld #Welder #Welding #Pipeline

  • @TranslasBV

    @TranslasBV

    9 жыл бұрын

    let's roll it one more time

  • @SonAndSoldierOfGod

    @SonAndSoldierOfGod

    8 жыл бұрын

    hey bro i love your vids, do you have any tips for me to get into the pipelines? im in school rightnow and i graduate on october 9th this year. and i would want to join the pipelines? how can i join?

  • @allwhiteeverything2538

    @allwhiteeverything2538

    7 жыл бұрын

    Luis Trevino make sure you ain't no fucking scab first. Get in a union,these scabs make more money for the company then themselves.

  • @PooleSpitfire
    @PooleSpitfire12 жыл бұрын

    I swear you gotta love all the idiots that get on YT & waste our time & space with these worthless, irrelevant comments!!! Thanks for posting good quality trade-related material. The TRUE CRAFTSMEN on here appreciate it i'm sure!!! Good lookin' work bro, keep it up!!! "WELDERS ARE THE REAL BACKBONE OF THE INDUSTRIAL TRADES"

  • @joshhanson1240
    @joshhanson124011 жыл бұрын

    cool video! do you happen to know what type/size of fire extinguishers are required on site for pipe welding,i need to buy one for my home shop thanks

  • @M1XXMATT
    @M1XXMATT12 жыл бұрын

    Is all pipe welded downhand /stoved out in Canada ? we always weld vertical up in the UK .I suppose it is easier to weld downhand .

  • @ryanerivez2055
    @ryanerivez205511 жыл бұрын

    hey man got two question. wut gap yall use for ur roots on pipes? n wut do u grind ur takes, n restarts with?

  • @patrickhood4896
    @patrickhood489611 жыл бұрын

    lol thanks for the help and even wen i try slowin down its not helpin but itll take sum time but how much do they pay per hour and is it a weekly pay

  • @iloveRUSSIAAA
    @iloveRUSSIAAA11 жыл бұрын

    do you have any vids of the sidebooms or other pipeline equipment?

  • @mohammadhafizhafiz3549
    @mohammadhafizhafiz35492 жыл бұрын

    wow awesome ndt mig

  • @mohawksniper79
    @mohawksniper7912 жыл бұрын

    Thay looken for welders i bin welding high pres. For more then ten years tssa. Do thay put a 6010 core and 7018 filler and cap?

  • @FromThe3PointLine
    @FromThe3PointLine12 жыл бұрын

    alright i seen guys with that kind of welding hood (the white one) and i seen guys with the welding hood that is kinda like a squared off with circle cardboard, what are those used for are those guys like QC??

  • @79TEXAN
    @79TEXAN11 жыл бұрын

    On some lines they do weld from the bottom up. They start with a root down, low high vertical up. The video shown here, more than likely the electrode is a 7010 or 6010 5p+. Someone correct me if I am wrong.

  • @dellguy123
    @dellguy12310 жыл бұрын

    what i hate about most welding videos is that most dont have a lens so you can actually see the different ways the puddle is manipulated

  • @jerrinsmith7355
    @jerrinsmith735510 жыл бұрын

    badass video :)

  • @fonseca365
    @fonseca36511 жыл бұрын

    In your opinion how likely is it that all this type of welding will become fully/semi automated in years to come? I'm looking into doing this type of work and i'm not quite sure about my future prospects in the industry. Nice videos you have there as well, cheers.

  • @patrickhood4896
    @patrickhood489611 жыл бұрын

    wats the best way to keep a steady hand when ur welding i have a problem with that i go to fast and my welds dont come out rite.......and how much does the pipeline pay

  • @sekiride
    @sekiride9 жыл бұрын

    8p+ pipeliner best rods for downhill

  • @FunWorldforchildren
    @FunWorldforchildren8 жыл бұрын

    very good

  • @novide3418
    @novide34183 жыл бұрын

    What electrodes are you using? and what's the base material reference in AWS?

  • @FromThe3PointLine
    @FromThe3PointLine12 жыл бұрын

    you guys use Lincoln electric 7018 1/8th Excalibur rods?

  • @dillonrobinson6802
    @dillonrobinson680211 жыл бұрын

    do you work like a week on then a week off or do you work untell the whole job is done then you go home or how does that work?

  • @summerjetset
    @summerjetset11 жыл бұрын

    wow, that was a long bead, how long are your rods and are they 5mm rods

  • @jhonyfordchannel8747
    @jhonyfordchannel87474 жыл бұрын

    Good job

  • @agamattmax
    @agamattmax11 жыл бұрын

    - on this pipe i would use 7016 for the root and 7018 for hotpass fill and cap and is stronger then the pipe itself - but it all depends on metal composition and rod and technique so there is no easy answer to how it should be done:))) great vid anyway - thumbs up@__))

  • @EverythingisFire
    @EverythingisFire12 жыл бұрын

    Very nice. Where did you (or I guess whoever is being filmed) get started in welding? Small trade school, community college, a bigger, welding specific school or just learned through apprenticeship? There's a big welding school a few states away and I'm wondering if I should go there. Quite an investment to see if I even like doing this haha.

  • @UniteForgetLeftRight
    @UniteForgetLeftRight12 жыл бұрын

    ive been hearing alot about shipyards adopting fcaw for almost everything including pipe, i used to work in a fab plant where we migged and core wire welded low pressure pipe, since it wasnt code a full pen. root was not required but i would often practice at it with little success. do you guys know much about wire welding pipe to code?

  • @damocash1980
    @damocash198011 жыл бұрын

    Cool video man, I hope to move away from the truck body building industry into pipe welding as soon as someone let's me in.

  • @snes0489
    @snes048911 жыл бұрын

    cool man...s0 what would be difference between 7010 and 7018?

  • @MrStryperfan
    @MrStryperfan12 жыл бұрын

    @MrStryperfan Oh oops could you answer my questons bout pg&e? I was wondering if you can weld for them but not be away from home for a month maybe be away for a couple days or whats a job with pg&e that would do that and il still work with my hands not some office job

  • @samirhazra4751
    @samirhazra47513 жыл бұрын

    Superb

  • @ThatSkeptic
    @ThatSkeptic10 жыл бұрын

    Is going to school for welding necessary? Is there a demand for pipeline welders? How much experience is required to work on a pipeline?

  • @farley34
    @farley3412 жыл бұрын

    is this in Eastern Washington state? past Moses lake?

  • @allwortht
    @allwortht12 жыл бұрын

    i should have gone to school and become a welder, i'm sure its not fun all the time, but what job is right?, i believe it's pretty good money in the oil patch....nice vid!

  • @9qkbn4
    @9qkbn47 жыл бұрын

    very nice

  • @jakebarney7766
    @jakebarney776611 жыл бұрын

    Dude you're a good welder! Love you videos! Oh and I don't care how much you make :P

  • @allanbague8808

    @allanbague8808

    3 жыл бұрын

    Can you ask you?

  • @theslimeylimey
    @theslimeylimey11 жыл бұрын

    Does that mean water and thick goopy oil run at the same pressures? One would expect higher viscosity fluid to require higher pressures to flow.

  • @MegaMarty46
    @MegaMarty4612 жыл бұрын

    do u do some welding too? and thats in canada right?

  • @dillonrobinson6802
    @dillonrobinson680211 жыл бұрын

    do they just mig on pipelines or just stick ???

  • @jerryvwallace2
    @jerryvwallace212 жыл бұрын

    I have a miller elite and yes there good helmets but the lens is flat, so when i'm welding over head all the slag fslls on the lens cover and Burns it up really fast.

  • @xAZAZELx13
    @xAZAZELx1310 жыл бұрын

    This video just rolled 300,000 views. I feel pretty good about that.

  • @freakoutairsoft

    @freakoutairsoft

    9 жыл бұрын

    xAZAZELx13 what rod is used for downhill pipe for your root fill and cap

  • @freakoutairsoft

    @freakoutairsoft

    9 жыл бұрын

    xAZAZELx13 what size is the elctrode and is the 8010 used for the root or for the fill and cap

  • @WelderPro-DaliRasco

    @WelderPro-DaliRasco

    8 жыл бұрын

    +xAZAZELx13 very good brother big up

  • @waltherchev1
    @waltherchev111 жыл бұрын

    I meant to put after that you guys have to have your own welding trucks right I'm only asking because I'm going to college to go into this field of welding

  • @troll1270
    @troll127010 жыл бұрын

    how do you ground the pipes?

  • @MrScotHughes
    @MrScotHughes11 жыл бұрын

    do you know what the pay range is for a rookie/green pipeline welder is?

  • @snes0489
    @snes048911 жыл бұрын

    did you guys have to do your 1st pass with 6010???

  • @loganlookabill6187
    @loganlookabill618711 жыл бұрын

    ive actually done a heck of alot of research on it

  • @kwamewilliams9445
    @kwamewilliams944510 жыл бұрын

    hey wat company is that and do they require experience workers, i have about at least 1 year of schooling, i just started pipe this semester im on 2 g position , i been using 6010 4 root pass , 7018 4 hot pass , filler, and cap pass

  • @user-xs6wy1mp3q
    @user-xs6wy1mp3q2 жыл бұрын

    Ωραία δουλειά τη ηλεκτροδιο χρησιμοποιούν

  • @loganlookabill6187
    @loganlookabill618711 жыл бұрын

    im 13 and wanted to do this for a few years and it just stuck..... would you guys recomend this?

  • @jerrinsmith7355
    @jerrinsmith735510 жыл бұрын

    are u guys using 7018???

  • @24yamaharider
    @24yamaharider12 жыл бұрын

    How much do these guys make a year? I'm very curious

  • @alpineLEGENDga
    @alpineLEGENDga12 жыл бұрын

    i am 17 and am thinking of getting into this sorta thing what would i need to do

  • @86NapoleonDynamite
    @86NapoleonDynamite11 жыл бұрын

    what company do yall work for?

  • @Panda7795
    @Panda779511 жыл бұрын

    What do you make on average between jobs?

  • @rep1989
    @rep198912 жыл бұрын

    is the miller elite a good welding helmet? message me or reply to some good helmets

  • @madjimms
    @madjimms12 жыл бұрын

    @gilberto83 what does "busting xrays" mean?

  • @djcraftyclaw6557
    @djcraftyclaw655710 жыл бұрын

    I have a question, since I'm a learning welder, when I weld pipe should I use a 7010 or 7018 for my root pass? I never get good penetration and I plan on getting a pipe cert. Any tips would be greatly appreciated.

  • @djcraftyclaw6557

    @djcraftyclaw6557

    10 жыл бұрын

    Okay because I was using 7010 for my root pass and it was good, but it put down to much keyhole, thanks for the help man

  • @djcraftyclaw6557

    @djcraftyclaw6557

    10 жыл бұрын

    Yeah I used 6010 for the last one and it did pretty good with the root pass, thanks for the help though (:

  • @gilberto83
    @gilberto8312 жыл бұрын

    do you guys grind between one pass to the other? why dont i ever see you all clean or girnd when stopping and starting agian?...is it not necessary? isnt there a chance of busting x-rays doing that?... just wondering?

  • @Mr19ru
    @Mr19ru11 жыл бұрын

    Красавцы!!! Увы у нас в Хакасии токого оборудование нет.

  • @TopDollarCartel
    @TopDollarCartel11 жыл бұрын

    This in Colorado?

  • @datkingjr
    @datkingjr11 жыл бұрын

    Any suggestions to "get my foot in the door"?

  • @TheXxchazzxx
    @TheXxchazzxx11 жыл бұрын

    Do you guys use pancake hoods?

  • @sigarts85
    @sigarts8512 жыл бұрын

    What happen if its raining ? do you have to stop or you put cover while you re working. BTW that is my dream job sir. Next quarter I'll be learning how to weld pipe :)

  • @LSMetalWorks
    @LSMetalWorks6 жыл бұрын

    Beautiful root pass man

  • @insanity0x1
    @insanity0x111 жыл бұрын

    for this pipeline, were you guys running stringers in the fill and weaving the cap? or full through weave? i know its different as per the WPS. i couldnt really tell haha. thanks for keeping america held together!

  • @alemgas

    @alemgas

    Жыл бұрын

    You will need more than a few welders to keep the U.S. together its fucked

  • @kdeckner
    @kdeckner10 жыл бұрын

    This may be a dumb question and please forgive me if it is.....Do Yall bury those pipes once you're done? or do they just sit there on the pallets?

  • @davekellend8987

    @davekellend8987

    7 жыл бұрын

    Tyler Deck were you born yesterday?

  • @hotpass79
    @hotpass7912 жыл бұрын

    god damn wind. that shit never stops

  • @ammarhanif3801
    @ammarhanif38015 жыл бұрын

    If welding at oil and gas ,the salary ok or not??

  • @hells023
    @hells02311 жыл бұрын

    1:12 what electrode is it?

  • @malcolmcarter1450
    @malcolmcarter145011 жыл бұрын

    they do, only under ideal factory settings though

  • @jackfrost-cz4fx
    @jackfrost-cz4fx12 жыл бұрын

    Now that is speaking the truth.

  • @jsmith-jg3bd
    @jsmith-jg3bd10 жыл бұрын

    dang I miss practicing pipe on my grandpas farm *aint much to do in the city*

  • @BigDish101

    @BigDish101

    6 жыл бұрын

    Someone has to weld them high rises...

  • @wailnshred

    @wailnshred

    5 жыл бұрын

    I would imagine there's a lot of distribution lines. Also steam pipes.

  • @dougspair
    @dougspair10 жыл бұрын

    6010 root and 7010 cap?

  • @krookiemonster2673
    @krookiemonster26737 жыл бұрын

    this probably seems like a dumb question but do they test for leaks and if so how?

  • @pipeliner0346

    @pipeliner0346

    6 жыл бұрын

    Krookiemonster -Each weld is x-ray, after ditching, lowering in, hdd, tie-ins, backfill and alot of other stuff is done they hydro-test the line in the ground, usually miles at a time.

Келесі