Muito Top ! 👏👏

@deckerdotto6035

4 жыл бұрын

You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/oqGpl6Wlo8m9l84.html Please be sure to have the latest firmware update installed on your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: kzread.info

Solution pour le bug "non data" Bonjour a tous , J'aimerai complété les informations Effectivement il faut bien que le câble violet/blanc et l'alimentation du boîtier des capteurs soit brancher sur l'alimentation des feux arrières mais pas seulement , il y a un réglage sur l'autoradio pour inversé la polarité du câble violet blanc et normalement c'est sur le réglage "batterie" Sur l'appli c'est (marche arrière : batterie) J'espère que ça vous aidera

Pioneer is best.

@deckerdotto6035

4 жыл бұрын

You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html Please be sure to have the latest firmware installed for your Pioneer PSH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads You can find more videos on Pioneer's You Tube Channel here: kzread.info

I want one for all my classic cars. The how far an object is in inches is the best! Can I mount the sensors under my metal bumper?

@deckerdotto6035

4 жыл бұрын

Please note: The Pioneer ND-PS1 is not designed to operate in a metal bumper. I can't provide you with a guide to install under a metal bumper. This will take some experimentation during installation on any given vehicle, to find the proper sensor mounting angle for reliable operation without interference from the metal bumper. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qJ6ZvJVtoZPUpqQ.html and you can find more videos on Pioneer's You Tube Channel here: kzread.info

❤ Pioneer

@deckerdotto6035

4 жыл бұрын

You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/oqGpl6Wlo8m9l84.html Please be sure to have the latest firmware update installed on your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: kzread.info

Do you have to use Pioneer parking sensor set or is it compatible with any other brands? They only sell the stereo part in my country and I couldn't find it anywhere.

@deckerdotto6035

4 жыл бұрын

I recommend using Pioneer ND-PS1. What country? What part of the world? You can find more videos on Pioneer's You Tube Channel here: kzread.info

I bought the sph10bt for my motorhome and the ndps1 as well. The wires are too short to mount on the rear bumper, but thought I could use the sensors on the front bumper instead. Can this work and would I need to consider any trigger wires?

@pioneerelectronics

3 жыл бұрын

This should work fine, but it won't be as convenient as using the reverse gear. Please note, the Pioneer ND-PS1 is designed to operate in a non-metallic location. The ND-PS1 is designed to automatically operate when the vehicle is in reverse gear. The receiver senses reverse gear through the Violet wire with White stripe. It's commonly connected to the reverse lamp. When the receiver senses 12 volts on this wire, it automatically changes to the Parking sensor source. When you take the vehicle out of reverse, the receiver automatically switches back to the previous music source. You can learn more about wiring the system in this Pioneer video: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html The parking sensors should work well in the non-metallic front bumper as long as you put a manual toggle switch on the Violet/White wire that shows 12 volts. This means when you want to use the parking sensors, you'll need to manually switch them on, and when you're done, you'll need to manually switch them off. Please take a look at this setup video for the parking sensors and the trigger wire: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html You can find more videos on Pioneer's KZread Channel here: kzread.info

I have parking sensors installed in my car and i am interested in getting that player.By Buying just the Pioneer cable for the parking system will it work? I see that the end of the Pioneer cable( that connects to the parking system box) is the same as every other cable.. Waiting for your answer. Thank you

@deckerdotto6035

4 жыл бұрын

The Pioneer SPH-10BT in-dash receiver is designed to work with the Pioneer ND-PS1 parking sensor system. I don't recommend swapping out parts from other products. You could damage or destroy the parking sensors, or the in-dash receiver, or both. You can learn more about Pioneer SPH-10BT here: kzread.info/dash/bejne/qJ6ZvJVtoZPUpqQ.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

I always did like pioneer

@deckerdotto6035

4 жыл бұрын

You can find more How To videos about Pioneer SPH-10BT in this Pioneer You Tube Playlist: kzread.info/dash/bejne/qJ6ZvJVtoZPUpqQ.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: kzread.info

can I install 2 front and 2 rear and have them in working mode - full time - not linked to reverse?

@deckerdotto6035

3 жыл бұрын

The answer is yes this can be done. The receiver's Violet/White reverse gear wire will be needed. It does not need to be connected to reverse in the vehicle. However please note: The Pioneer SPH-10BT sees the Parking Sensor effectively as a source. This means, when the parking sensor is active, all other music sources, for example, radio, Bluetooth, USB are all muted by the receiver. If that's good with you in your particular application, this will work very well. If I was installing this setup, I would install 2 sensors in the front and 2 in the back. I recommend 1 and 2 in the front, and 3 and 4 in the back. This will group the front sensors, and the rear sensors as the right and left on the display screen. I'm not aware of a way to change the receiver or phone display to show front and back. Next, I would install the receiver's Violet Wire with White stripe to a 12 volt source, and set the polarity of the reverse gear wire to positive. This will mean the parking sensors are on at all times when the vehicle is on. I would also put a toggle switch in this wire so I could switch the parking sensors off, buy cutting 12 volts to the Violet/White Wire when I wanted to do so. You can find a video about wiring your Pioneer receiver here: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html You can find a full playlist of How To videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qZuqqsiPpdadiNo.html Please be sure to install the latest firmware for your Pioneer SPH-10BT here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's KZread Channel here: kzread.info

Can we use SPH-1-BT with a actual reverse camera? And If i have this installed, can't I hook a reverse camera?

@deckerdotto6035

4 жыл бұрын

The Pioneer SPH-10BT is not designed to work with a reverse camera. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qpOOzsyYk7yqaaw.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

Will ND-PS1 sensors work with AVH-Z9200DAB if I connected it to the CAN-BUS port of the unit?

@pioneerelectronics

3 жыл бұрын

As of 2021 April, the Pioneer ND-PS1 is designed to operate with the SPH-10BT and other similar Pioneer receivers using the Pioneer Smart Sync App. I do not recommend to attempt to operate the product in any other way. You can learn more about using a vehicle's existing parking sensors with receivers similar to AVH-Z9200DAB in this Pioneer video: kzread.info/dash/bejne/eYxsxKeNeM3Am8o.html You can find more videos on Pioneer's KZread Channel here; kzread.info

I have Smart Brabus Car and a rear bumper has 2 holes for sensors so I can install only 2 parking sensors. Will it be work and how to connect it correctly?

@deckerdotto6035

3 жыл бұрын

I recommend using all 4 sensors included with the Pioneer ND-PS1. If you don't use all 4 sensors, an error message may be displayed. The ND-PS1 includes a hole saw of the proper size for sensor installation. You can see it here: kzread.info/dash/bejne/kX2H2rKmmdHKmZc.html Please note: the Pioneer ND-PS1 is not designed to operate in metal bumpers. You can find more videos on Pioneer's KZread Channel here: kzread.info

Where in the car to connect the purple/white wire from indash receiver?

@deckerdotto6035

4 жыл бұрын

The Purple/White wire is the Reverse Gear wire and it let's the in-dash receiver know the vehicle is in it's reverse gear and this automatically switches to the Parking Sensor portion of the app and, then automatically goes back to the music source when the vehicle is out of it's reverse gear. One possible place to connect the Purple/White is to the vehicle's Backup Lamp Terminal. You can learn more about the Pioneer Wire Harness in this video: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's You Tube Channel here: kzread.info

Hi Deckerd, that's a great video but can't make my sensor work.It seems to be wired correctly, the app know there is reverse sensors but it says 'NO DATA ERROR'. I tried to connect the violet/white to the rear positive of the rear light but doesn't work. When I move to reverse (automatic gearbox - smart Roadster) it goes 'grey'. I did connect 'Parking break' with the black lead of the radio. Can you advise please?

@pioneerelectronics

3 жыл бұрын

What is the model number of your Pioneer in-dash receiver? In what country are you using this product? What is the firmware version of the receiver? If you are in the US, you can find the latest firmware for the Pioneer SPH-10BT here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads Please be sure to have Pioneer Smart Sync App version 3.3.1 or newer installed on the phone. Please be sure the ND-PS1 has power and ground to operate. The ND-PS1 should power on when the vehicle is on, and should power off when the vehicle is off. The ND-PS1 should power on and off just like the in-dash receiver's red wire. You can learn more about wiring your receiver here: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html

@SebastienLocteau

3 жыл бұрын

@@pioneerelectronics Hello, I am using Sph-10BT from Ireland. Version of the app phone is 3.2. I can't see an upgrade available for 3.3. The firmware is 8.18

@pioneerelectronics

3 жыл бұрын

The Pioneer ND-PS-1 has a simple Power and Ground installation. The red wire should be connected to a switched circuit in the vehicle so it will power on and off automatically with the vehicle. Black wire to a tested ground or to metal in the body or frame of the vehicle. The Data cable must be connected to the ND-PS1 control box and the other end to the back of the Pioneer SPH-10BT. It can only plug into one place on the back of the in-dash receiver. Please be sure the data cable is firmly connected at both ends and has not been damaged. Additionally I strongly recommend to use all 4 of the sensors plugged into the control box. On the SPH-10BT, I recommend to press the receiver's microprocessor reset button. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on SPH-10BT behind the detachable face near the center of the receiver. I recommend to reset the receiver. You can see it here: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html Please note, the Pioneer ND-PS1 is designed to operate in a non-metallic location. Plastic bumper, not metal. The ND-PS1 is designed to automatically operate when the vehicle is in reverse gear. The in-dash receiver senses reverse gear through the Violet wire with White stripe. It's commonly connected to the reverse lamp. When the receiver senses 12 volts on this wire, it automatically changes to the Parking sensor source. When you take the vehicle out of reverse, the receiver automatically switches back to the previous music source. You can learn more about wiring the system in this Pioneer video: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html It is possible for the parking sensor and receiver to operate without the use of the app on the phone. I recommend to test the system without the phone just to be sure it's operating correctly. You can learn more about setting up the system here: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html

How long is the data cable (I plan to fit it in a 6metre-long van).

@pioneerelectronics

3 жыл бұрын

There are 4 sensors included with the Pioneer ND-PS1. Each of the sensors is on a cable approximately 2.5 meters or 8 feet. Each of the sensors plugs into the main control box. The data cable from the main control box to the Pioneer SPH-10BT is approximately 5 meters or 16.5 feet. Please note: the Pioneer ND-PS1 is not designed to operate in a metal bumper. The ND-PS1 works with the Pioneer SPH-10BT or similar Pioneer receiver only. You can learn more about setting up the receiver to work with the ND-PS1 here: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html You can download a copy of the installation manual for Pioneer ND-PS1 here: www.pioneerelectronics.com/StaticFiles/Manuals/Car/ND-PS1_InstallationManual060618.pdf and you can find more videos on Pioneer's KZread Channel here: kzread.info

Quick question, Does the sensors work even without the phone synced into the car stereo? If it does, i guess the car stereo would change colors depending on what it detects, is that correct? Thanks!

@deckerdotto6035

3 жыл бұрын

Quick answer, Yes it works without a phone connected to the receiver and, the bottom of the Pioneer SPH-10BT will change colors based on the proximity of object behind the vehicle. The distance to the object behind the vehicle is displayed on the receiver's center display as seen here: kzread.info/dash/bejne/kX2H2rKmmdHKmZc.html You can learn more about setting up the Pioneer SPH-10BT to work with the ND-PS1 in this video: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qZuqqsiPpdadiNo.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

Would this work with the sph19bt?

@deckerdotto6035

4 жыл бұрын

Yes, the parking sensors will work with SPH-C19BT. You can see it here: pioneer-india.in/buy/car-entertainment-car-stereos-usb-players/sph-c19bt/ You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qJ6ZvJVtoZPUpqQ.html and you can find more videos on Pioneer's You Tube Channel here: kzread.info

Nice vid! I'm looking for a data cable replacement, anyone know how to get one?

@deckerdotto6035

4 жыл бұрын

If you need replacement parts for Pioneer products I recommend PACParts. This is the Authorized Pioneer Parts Distributor in the US. You can find them here: www.pacparts.com/default.cfm You can find more videos about Pioneer SPH-10BT in this Pioneer How To Playlist: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html Please be sure to have the latest firmware for your Pioneer SPH-10BT installed. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's KZread Channel here: kzread.info

can I install this under a plastic bumper? I don't want to cut mine.

@deckerdotto6035

4 жыл бұрын

A plastic bumper is recommended. I'm not sure what you mean by under the plastic bumper. Please note, the Pioneer ND-PS1 is a proximity alert system. If the sensors are pointing toward the ground, or can "see" any solid object, for example, part of the vehicle, they will continuously read that object as being close to the vehicle. This may defeat the purpose of the product. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html Please be sure to install the latest firmware update for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos about on Pioneer's You Tube Channel here: kzread.info

It's possible to connect to pioneer sph-da230dab ?

@deckerdotto6035

3 жыл бұрын

No. There is no connection port on the back of the Pioneer SPH-DA230DAB for the parking sensors. You can find a full playlist of How To videos from Pioneer about NEX in-dash receivers here: kzread.info/dash/bejne/iY1kqa6sc5anqKg.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

I note that this is not designed to operate with a metal bumper. Does that mean that it doesn't work at all if it's fitted to, or near to a metal bumper. I'd like to try to fit it to a classic vehicle.

@deckerdotto6035

4 жыл бұрын

That's correct, I don't recommend using this product in a metal bumper. Or in any metal part. Above or below a metal bumper, depending upon the distance from the metal bumper, and the mounting angle of each detector, it might work. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qJ6ZvJVtoZPUpqQ.html Please be sure to install the latest firmware for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and you can find more videos on Pioneer's KZread Channel here: kzread.info

I can install the sensors without any radio and only use my android phone only?

@deckerdotto6035

4 жыл бұрын

The Pioneer ND-PS1 parking sensor is designed to be operated as an accessory attached to the Pioneer SPH-10BT. You can find more videos about the Pioneer SPH-10BT here: kzread.info/dash/bejne/ZIxkwbmyhKizoJM.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

Hello. Function to player avh-z5250bt ?

@pioneerelectronics

Жыл бұрын

The Pioneer ND-PS1 parking sensor does not work with AVH-Z5250BT. You can find more videos on Pioneer's KZread Channel here: www.youtube.com/@pioneerelectronics

Hi, does it work with AVIC-W8600NEX?

@pioneerelectronics

3 жыл бұрын

The Pioneer ND-PS1 is designed to operate with the Pioneer SPH-10BT or similar Pioneer receiver. The ND-PS1 is not designed to work with AVIC-W8600NEX. If your vehicle already has proximity sensors installed from the factory, it may be possible to integrate them with the Pioneer AVIC-W8600NEX using the Maestro RR EOM integration unit. You can learn more about how Maestro RR works in this How video from Pioneer: kzread.info/dash/bejne/qK6CxsF7gt2ngcY.html You can find a full playlist of How To videos from Pioneer about NEX receivers here: kzread.info/dash/bejne/qqqklJtqYKfXgdY.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

Hola tengo, este modelo de Pionner pero al conectar los sensores de reversa me manda un mensaje de error "sin datos", saben cuál es la solución?

@pioneerelectronics

2 жыл бұрын

What is the model number of your Pioneer in-dash receiver? Do you have the data cable from the parking sensor connected to the back of the in-dash receiver? Does the ND-PS1 have power? Did you press the receiver's microprocessor reset button?

I do have question, will there be option to switch from inches to centimeters?

@pioneerelectronics

2 жыл бұрын

Yes, Pioneer Smart Sync version 4.1 or newer is available as of 2022 May. You can change the measurement units in the Smart Sync App. You can learn more about Pioneer Smart Sync in this Pioneer video: kzread.info/dash/bejne/gId5k8-Jj9OroNI.html You can find more videos on Pioneer's KZread Channel here: kzread.info

@Sephiroth391

2 жыл бұрын

@@pioneerelectronics thanks for responding, head unit is amazing and I am using one for 3 years. Only suggestion for future from user's feedback would be faster charging on front USB port

@pioneerelectronics

2 жыл бұрын

@@Sephiroth391 Thank you for your suggestion. Please be sure to have the latest firmware installed on your Pioneer SPH-10BT. you can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads

Hello Where does the "data" error come from? I cannot use my car radio but the rear sensors are working Thanks

@deckerdotto6035

3 жыл бұрын

Please be sure your Pioneer SPH-10BT in-dash receiver has the latest firmware installed. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads After installing the latest firmware be sure to press the microprocessor reset button on the in-dash receiver. You'll need a paperclip or some other small point to press the microprocessor reset button. You can find the microprocessor reset button on the Pioneer SPH-10BT behind the detachable face, near the center of the receiver. If this does not correct the issue, I recommend to disconnect the ND-PS1 parking sensors from the back of the in-dash receiver, and reset again. Is the receiver operating correctly without the parking sensor connected? If so, disconnect power to the parking sensor controller and check the connections to all 4 parking sensors. Once all 4 sensor connections are confirmed, re-connect the power, reconnect to the in-dash receiver. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

@Mexic_Original

3 жыл бұрын

@@deckerdotto6035 Hello, First of all thank you for your feedback. I carried out the recommended manipulations but without success. I can confirm that the station alone works but when I plug the sensors into it, the station goes into a "no data" error and cannot be used. on the other hand if I put the reverse gear the sensors focntionnes. for the details I have power the box of the sensors on the + of the reverse gear and the black on the neutral. the question: is it necessary to connect the purple / white cable? if so how to connect it? I am really blocked because they all work separately but not together. Thanks for your help. PS: the station is in software 8.18

@Mexic_Original

3 жыл бұрын

i have the same problem : kzread.info/dash/bejne/Z4KiybaKmae_YJs.html

@deckerdotto6035

3 жыл бұрын

Thank you, I understand the issue better now. The Violet/White wire on the Pioneer SPH-10BT is used to let the in-dash receiver know the vehicle is in it's reverse gear and this will automatically change the in-dash receiver's operation to the ND-PS1 parking sensor. The Violet/White Wire must sense a change in voltage when you put the vehicle in it's reverse gear, and when you take the vehicle out of it's reverse gear. One possible connection for the Violet/White wire is the vehicles Backup Lamp Terminal. You can learn more about the Pioneer wire harness system here: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html You can learn more about setting up the Parking Sensor and Violet/White Wire here: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html

@Mexic_Original

3 жыл бұрын

@@deckerdotto6035 indeed and it is also necessary to see the parameters of the car radio because my purple / white son was in reverse operation. once in the parameters and change to "battery" all functions. Thank you again for your help

How can I bought it. I'm from Malaysia.

@deckerdotto6035

4 жыл бұрын

Please contact Pioneer in your area for help. sg.pioneercarentertainment.com/post_faq

It's a very big missed opportunity that it won't work in a metal bumper. Wouldn't "classic car" people look at this, being single DIN? Was considering this for my RE Capella, luckily I just didn't buy them, so that's a good thing about this video. Thank you

@pioneerelectronics

2 жыл бұрын

Pioneer makes many different 1 DIN in-dash receivers including the Pioneer SPH-10BT seen here: kzread.info/dash/bejne/ZIxkwbmyhKizoJM.html The ND-PS1 parking sensor is not designed to operate installed in a metal bumper. With a metal bumper, you may also consider a Blind Spot and Cross Traffic Detection System like the Pioneer DSA-BS100 seen here: kzread.info/dash/bejne/loCgqplsZpfYe6w.html The SDA-BS100 will work with a metal bumper. While not the same as a parking sensor system it can also be very useful for vehicles in motion when you are baking out of a parking spot. You can find more videos on Pioneer's KZread Channel here: kzread.info

@peteanderson2533

2 жыл бұрын

@@pioneerelectronics thank you, I am considering stepping it up to the single din in dash screen (AVH-Z7250BT) and adding a camera, but trying to track them down in Australia is proving to be "fun".

I am the only one around here who thoughts it's a shame that this product is compatible with none of Pioneer's own lineup of CarPlay compatible displays... Why do I have to choose between CarPlay and parking radar? I want both.

@deckerdotto6035

4 жыл бұрын

Please note: As of 2019 December, all North American versions of Pioneer NEX in-dash receivers work with Apple CarPlay and also work with iDatalink Maestro RR. When using Maestro RR, you can use the existing factory parking sensors installed in many vehicles and a full display of the Front and Rear proximity alert is shown on the screen of the NEX in-dash receiver. You can see it here: kzread.info/dash/bejne/eYxsxKeNeM3Am8o.html The Pioneer SPH-10BT is designed for older vehicles, or less expensive vehicles that typically have 1 DIN radio openings and do not have factory parking sensors. The Pioneer ND-PS1 is a 2019 product and is designed to operate with 2019 and newer in-dash receivers that carry the necessary hardware. Future versions of Pioneer in-dash receivers may have this hardware compatibility. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qpOOzsyYk7yqaaw.html You can find more videos on Pioneer's You Tube Channel here: kzread.info

@JZ0ver

4 жыл бұрын

Thank you for your answer! I have a relativly old car. Our family's old car which is almost 18 years old (Skoda Octavia I. from 2002 I am from Europe) it's totally functional but it lacks some of our new car's features obviously. It doesn't have a built in parking sensors system those were too unreliable and unuseable that time around not to mention the price was also high. Who could use an only beep-beep system. Despite it's age my car have a possibility to have a 2 DIN radio and I want to equip it with a CarPlay compatible media system and an 4-8 sensor parking radar system (rear and if possible front but the rear is more important). I do not prefer the camera systems because those doesn't measure distance and at night they become less usable while the radar systems working properly at night. The problem is that these systems comes with external display and I don't want to ruin the car's interior with multiple display to every new system. My car doesn't compatible with iDatalink Maestro RR due to it's age and even if it would the car didn't have the required sensors. I am a little clueless what to do.

Does this work without the phone?

@afroaliens

4 жыл бұрын

if the phone is in your pocket or you forgot it...

@deckerdotto6035

4 жыл бұрын

Yes. The Pioneer ND-PS1 works when properly installed with the Pioneer SPH-10BT even without a phone in use. Please check out this video for Parking Sensor setup without the phone: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html Please be sure to install the latest firmware update for your Pioneer SPH010BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads And to update to the latest version of the Pioneer Smart Sync App from the app Store. You can find more videos about Pioneer SPH-10BT in this Pioneer You Tube Playlist: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html and you can find more videos on Pioneer's You Tube Channel here: kzread.info

Can you install just two sensors ?

@deckerdotto6035

4 жыл бұрын

I recommend to install all 4 sensors. With only 2 connected you may receive an error message. I don't know what application you are considering, it is possible to point the sensors to the side of the vehicle as well as to the rear. You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/gGqAyMWnmtzIn9I.html Please be sure to install the latest firmware update for your Pioneer SPH-10BT. You can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads and please be sure to get the latest version of the Smart Sync App. You can find more videos on Pioneer's You Tube Channel here: kzread.info

Sir it's work with out smart phone or not

@deckerdotto6035

3 жыл бұрын

Yes it works without a phone connected to the receiver and, the bottom of the Pioneer SPH-10BT will change colors based on the proximity of object behind the vehicle. The distance to the object behind the vehicle is displayed on the receiver's center display as seen here: kzread.info/dash/bejne/kX2H2rKmmdHKmZc.html You can learn more about setting up the Pioneer SPH-10BT to work with the ND-PS1 in this video: kzread.info/dash/bejne/lqaOlbepmM2YZrA.html You can find more videos about Pioneer SPH-10BT here: kzread.info/dash/bejne/qZuqqsiPpdadiNo.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

@varunsingh5330

3 жыл бұрын

Thanks sir

why there is no solution that can carry not only rear but front bumper - I could pay twice the price but want to have front and back with 4 sensors per bumper

@deckerdotto6035

3 жыл бұрын

The SPH-10BT is an entry level product designed for older vehicles that don't have a 2 DIN opening in the dash. It can bring some modern technology to an older vehicle at relatively low cost. Pioneer makes more advanced receivers that can operate with new vehicles that have factory front and rear proximity alert sensors. You can see an example here: kzread.info/dash/bejne/eYxsxKeNeM3Am8o.html This requires the use of the optional iDatalink Maestro RR. You can learn more about Pioneer receivers that work Maestro RR here: kzread.info/dash/bejne/g6aqsM2Al7XVZ6g.html and you can find more videos on Pioneer's KZread Channel here: kzread.info

I have also installed, But i have a Big issue! It works fine when the car is stationary and with the ignition on.. But if the start the car, it doesn't work.. What did i do wrong? :(

@pioneerelectronics

Жыл бұрын

Please be more specific with your question. What is the model number of your Pioneer in-dash receiver? Do you also have the ND-PS1 installed in the vehicle and connected to the receiver? What works with the vehicle not started? The receiver? ND-PS1? or both? You may have the ND-PS1 power connection installed incorrectly. I recommend to use a wire that has ~12 volts when the vehicle is on, and powers down when the vehicle is off. You can learn more about the Pioneer wire harness here: kzread.info/dash/bejne/X5Z6ldezqsS6Y5M.html You can find more videos on Pioneer's KZread Channel here: kzread.info

@iConiglio

Жыл бұрын

Hi @@pioneerelectronics :) Yes i have the SPH-10BT with ND-SP1, when the carkey is turned, just to make power to the ND-PS1 and the AVH-10BT receiver, its works fine, but if the ignition is on and i take a drive, then i have the issue, it will not start the reverse system when the motor going on! The purble/white is connected to to reverse lamp, just as assigned. - and the ND-SP1 get the power from red tail light Woltage output: - With the key turned 12,3V - With the motor started 13,0V

@pioneerelectronics

Жыл бұрын

@@iConiglio Just to be clear, are you saying, with the engine running...when you put the vehicle in reverse gear, the Smart Sync app on your phone does not respond and change to the back up proximity alert screen. Or are you saying, the App responds correctly to the reverse gear input, but there is no data from the ND-PS1 parking sensor system. Is there any error message on screen? I recommend to power the ND-PS1 from a switched power source that measures ~12 volts when the vehicle is on and measures ~0 volts when the vehicle is off. If there is no response from the app to reverse gear, this leads me to believe this issue is with the purple/white wire connection/installation. I recommend to test the purple/white wire with the vehicle running. It should measure a change in voltage when the vehicle is put in reverse gear and again measure a change in voltage when the vehicle is taken out of reverse gear. There is a setting in the app to adjust the expected change in voltage from positive or negative input as shown here: kzread.info/dash/bejne/kX2H2rKmmdHKmZc.html Please be sure to update the SPH-10BT to the latest firmware. If you are in the US, you can find it here: www.pioneerelectronics.com/PUSA/Car/Digital+Media+Receivers/SPH-10BT#downloads

@iConiglio

Жыл бұрын

@@pioneerelectronics the in-dash receiver doesn't respond on reverse gear, with the engine running. The receiver works normal, besides the reverse gear problem. Only when the key is turned on, everything works as it should abort the reverse gear, as a said, the issue is when ignition is running The FW on the receiver is 8.27, the voltage from the purple/white cable from the radio is 11,8V when the key is turned, and 12,3-12,9V when the ingine is running and 0V if the car is in neutral or another gear NO Error on the screen The power of the ND-SP1 is connected as you recommend

@iConiglio

Жыл бұрын

@@pioneerelectronics ?

I really do not understand why to have the ND-PS1 to work you have to connect also a violet wire on the stereo, i.e. SPH-20DAB , to the reverse gear switch. The installation manual of ND-PS1 says you have to connect power supply of the ND-PS1 to the reverse gear light . So the ND-PS1 already tell to the stereo unit that the car is in reverse gear state since it got power. So why another cable to connect ? And if Pionner wants another +12 volts to the stereo violet wire , why not add a wire from those coming from the ND-PS1 unit ? It is a really BAD DESIGN from Pioneer .

@deckerdotto6035

3 жыл бұрын

On Pioneer in-dash receivers, the violet wire with white stripe is used to let the in-dash receiver know if the vehicle is in it's reverse gear or not in reverse gear. When the vehicle is in reverse, this can automatically switch the SPH-20DAB into it's rear sensor mode, and begin to display information from the ND-PS1 parking sensors. When you take the vehicle out of reverse gear, this automatically switches the in-dash receiver out of rear sensor mode and goes back to playing the previously selected music source. The ND-PS1 owner's manual recommends to power the ND-PS1 with the power from the reverse lamp. When the reverse lamp is on, the ND-PS1 is also powered on. When the reverse lamp is off, this will power off the ND-PS1. On certain electric vehicles this type of operation may not be possible. With this type of vehicle the ND=PS1 red wire may need to be connected to an accessory lead that powers on and off with the vehicle. Just because the ND-PS1 has power does not mean you are viewing the rear sensor data. You can find more videos on Pioneer's KZread Channel here: kzread.info

Hello, i have this model of pionner system; avh z5 150bt. Will the ps 1 sensors work with it?

@deckerdotto6035

3 жыл бұрын

The Pioneer ND-PS1 is not designed to operate with the Pioneer AVH-Z5150BT. You can find a full playlist of How To videos from Pioneer about Pioneer NEX receivers here: kzread.info/dash/bejne/gZakrbqworGepdY.html and you can find more videos on Pioneer's KZread Channel here: kzread.info