Hi Bert!!😀😀 The Pink Way is a Zenoah knock off. They are pretty nice for the price. I have 2 John Cutter saws that are also Zenoah knock offs. They have been really good for the price. They have always started easy and ran great. The Pink Way also has the easy start on it. Don't just rip on it you will break it. Just pull it out slowly to the end and it will automatically spin the engine over for you. If you rip on the rope you will end up breaking the rewind. Take care buddy!!😀😀💚💚 Logger Al

@BertsCustomCuts

Ай бұрын

It definitely is a different feeling starting it.

Zenoha Clone ...Nice Chainsaw. Greetings from Germany

@BertsCustomCuts

Ай бұрын

So far, I'm impressed with it. Does need to have carb adjusted some.

@husqvarna-pit9044

28 күн бұрын

@@BertsCustomCuts

Great video!! The Pinkway will be a useful tool in the woodyard!! Stay Hydrated and Have a Safe Day

@BertsCustomCuts

Ай бұрын

You got that right!

Excellent video Bert I’m sure 👍 that Gavin is still happy having his own saw 😮😊❤

@BertsCustomCuts

Ай бұрын

He has a few saws. This was his first new saw.

I like your big grinding wheel in the opening. Found one on my property when we bought it. The wheel is still nice but the frame was rusty and bent. Nice job 👍

@BertsCustomCuts

Ай бұрын

That's a big roll of TP, not a grinding wheel. Many years of use as shop rags or as toilet paper.

Very cool hope it works out till it’s time to get a higher use saw. For what it is it seems like a great value. The way I look at saw. Homeowner farm and pro saws is they all have there intended uses or heat cycles. Homeowner a tank of saw use at a time. Farm saw a few tanks in a row. Pro saws use all day. Right saw right for right usage (heat cycles). Good luck and keep these videos coming they are very relatable!!!!!

@BertsCustomCuts

Ай бұрын

That's the plan! May try a different bar on it soon.

Chris hasn’t brought over to the dermal team. Ha Ha. Great video Bert

@BertsCustomCuts

Ай бұрын

I use the dremel on the processor chain. I just like the better consistency of my grinders.

@rickthelian2215

Ай бұрын

@@BertsCustomCutsyeah, with Dremel on the job

I really like a ground chain. I touch up with rotary tool. I probably do 10 chains at time when get bench grinder out. Make doing the depth gauge easy as well. Little saw cuts good.

@BertsCustomCuts

Ай бұрын

I do all my sharpening on the grinders. I have a plano box with spare chains and just change them when dull.

👍👍

@BertsCustomCuts

Ай бұрын

Thanks for watching.

Good one 👍🏻

@BertsCustomCuts

Ай бұрын

Thanks for the visit

Do you adjust the rakers separately?

@BertsCustomCuts

Ай бұрын

I usually do the rakers on saw if I want more of an aggressive cut. My depth guage doesn't work on safety chain.

Pinkway audio may be the cause but does sound rich? comparison video with Chris's new 562? Finally had a chance to run your grind for a bit cut fast on a 592 in 30" oak with rakers at .035 and does not feel grabby but does hard stick stall at times.🤨🤔unless you might offer feedback likely just try resharpen without doing rakers and hopefully get something around .030"

@BertsCustomCuts

Ай бұрын

I run my rakers around .025 for hardwoods. Will do a comparison with 562 one of these days

Hi Bert the Pink way will cut like buttered now ( Ty Ron

@BertsCustomCuts

Ай бұрын

It did cut better after I sharpened it.

Fun video Bert the Chinese make crap but it works.

@BertsCustomCuts

Ай бұрын

They make stuff cheap, so it doesn't last to get you to buy another.

At least $120.00 worth of fun.

@BertsCustomCuts

Ай бұрын

I'm impressed with it for the most part so far.