In this video, I introduce the topic of PID control. You will learn the basics of different types of controllers like discrete and multistep controllers. Also, you will learn Proportional, integral, and derivative modes of operation with advantages and limitations. In the next lecture, we will learn how to tune a controller in Aspen HYSYS.
📢 If you find my content helpful, please don't forget to subscribe to my channel bit.ly/3b6wuV9 🔔.
If you want ❤️ to learn Aspen HYSYS from very basic, then check the following links:
Tutorial # 1
Getting started with Aspen HYSYS
www.youtube.com/watch?v=PIlFf...
Tutorial # 2
Bubble point, Dew point and Phase diagram calculations
www.youtube.com/watch?v=51xsH...
Tutorial # 3
Flash calculations in HYSYS
www.youtube.com/watch?v=XfOVK...
Tutorial # 4
Sensible and latent heat and generation of saturated steam table in Aspen HYSYS
www.youtube.com/watch?v=d156F...
Tutorial # 5
Centrifugal pump sizing and selection in six easy steps
• Centrifugal pump sizin...
Tutorial # 6
Pump power and efficiency calculations in HYSYS
• Pump power and efficie...
Tutorial # 7
Pump performance curves generation and rating in HYSYS
www.youtube.com/watch?v=6H3gV...
Tutorial # 8
Simulation of Compressor and Turbine in Aspen HYSYS
• Simulation of Compress...
Tutorial # 9
Compressor Surge Analysis in Aspen HYSYS
www.youtube.com/watch?v=ssB3q...
Tutorial # 10
Pipe Sizing, Pressure Drop Calculation, Use of Adjust Function in HYSYS
www.youtube.com/watch?v=2nBuw...
Tutorial # 11
How to use case study tool and generate vapor pressure curve for Propane in HYSYS.
www.youtube.com/watch?v=d5FCO...
Tutorial # 12
Crude oil three-phase separation | Decanter simulation in HYSYS
www.youtube.com/watch?v=WK0mv...
#ControllerTuining #PIDController #ControllerTypes
0:00 Introduction
0:40 Learning objectives
1:23 Discrete controllers
4:27 Multistep controllers
4:41 Continuous controllers
7:35 Why controllers need tuning?
12:07 Question
14:03 Proportional Mode
17:27 Integral Mode
19:03 Derivative Mode
20:38 Summery