⚠️ *Found this video super useful?* Buy Paul a coffee to say thanks: ☕ PayPal: www.paypal.me/TheEngineerinMindset

@rashwansharuk698

3 жыл бұрын

What is the difference between PICV and DRV

I don't have a need to use picvs but I really enjoy the breakdown on how things work and why...very informative mate..ty so much

We started swapping out all our delta style valves to these Danfoss valves. Thanks for the explanation.

Excellent animations to show the workings. In the process of designing a system with a heat exchanger, I had planned to use a proportional valve to control the fluid flow. Great to find out now that this is a better valve selection! Thanks again for the awesome video. Will be ordering one of these on Monday.

Very well explained & graphics are amazing. Keep up the good work. Thank you.

I love your videos. I actually use them to teach part of my Plumbing class hydraulic flow. Thank you for making my life easier.

@EngineeringMindset

4 жыл бұрын

Thanks for sharing our content

Very simple and informative, thanks mate!

Thank you.. Please keep them coming!!

Wow... Well explained... Good animation and analogies along with examples!

No easiest video on KZread , great ways of explanation,

Great, now I finally got it. Keep the good work ;)

Good explanations. Very didactic. Congrats!

Awesome stuff thank you!

Keep up making these contents, I love you work

@EngineeringMindset

4 жыл бұрын

Thank you!

Great video! 🤯

Great stuff!!

Thanx for sharing.we learn too much from your videos.good luck master

Thank you and very nice video to explain PICV🎉

Great job Paul keep it up, please make a vedio on btu meter which is use to generate the bill, include the whole formula to get kwh or mwh, also show it's installation and input parameters

Great work. Can you please upload more tutorials of Industrial Electrical Installation? DOL starting method of motors, Motor controls, SPD . etc

Great vid, thanks a lot.

Outstanding !!

@EngineeringMindset

4 жыл бұрын

Thank you!

Great video very well explained

I hope you know how invaluable your videos are.

@EngineeringMindset

4 жыл бұрын

Glad you like them!

Very Good. Keep It Up.

Thanks Good information

Amazing water animation

Nice explanation

Awesome & useful video

@EngineeringMindset

4 жыл бұрын

Glad you enjoyed

Thanks

Great work. Good explanations and supporting animations. Time permitting I want to add to the knowledge by doing some building services videos on a new channel. More on installation and opening the electronic equipment. It will be more of an exploration to understand a bit more.

Beautiful

Thanks alot

Please add info on the blue and red measuring pipes, and how you use them. I love your videos :)

@charadremur333

3 жыл бұрын

Look at a HVAC pressure manifold.

Awesome.

Very nice video What if downstream pressure keeps changing? Still this valve will give constant flow? If not, which valve used for that?

clear explanation (y)

Excellent. But working and internal construction is almost same as PCV. Good job. Please keep us educating.

I thought of something similar to use for ragulating pneumatic supplies.

Nice video, with what looks like a typo at the end (varaible) :)

Please tell about working principle of BALANCING VALVE & DIFFERENTIAL PRESSURE CONTROLLERS (Individuals )BV+DPC Why should follow PIBCV installed return pipe?

Hi there, can I use this unit to control the balance in my water pressure in my home ? Thank You.

Good tool for HVAC

Working on a system at the moment. 2 chillers on primary side linked to secondary system through a de-coupler. Max flow on primary chillers in 250 m3/h in total.On the secondary side there are variable speed pumps. I need to ensure a max flow of 240m3/h on secondary side. Just wondering should i replace the 200mm DRV with a similar size PICV To ensure I don't pull no more than 240 m3/h.

I've wired 100s of those up and didn't know about spring for the DP.

@EngineeringMindset

4 жыл бұрын

Glad you found it useful

@benoit721

4 жыл бұрын

yeah exactly same haha

@jskbuildingservices5282

4 жыл бұрын

That's why there is a minimum and maximum differential pressure requirement.

Very niece

Thanks Paul The Engineering Mindset much appreciated from South Africa Can you do something on VFD/VSD and Circuit breakers

@EngineeringMindset

4 жыл бұрын

Glad to hear, yes VFD very very soon! I'll tag you when live

@EngineeringMindset

4 жыл бұрын

VFD Video is now live! here: kzread.info/dash/bejne/q3mEx5mLdNfRl9I.html

@EngineeringMindset

2 ай бұрын

Seen our new incredibly detailed MCB video? link: kzread.info/dash/bejne/maV515utaKvdh5M.html

Sir please do a video about VRV System and how they works , vrv maintenance and its application

@EngineeringMindset

4 жыл бұрын

Check this video kzread.info/dash/bejne/qquqzdGje8yyerA.html

So, in EE analog... It's like a current source (as opposed to voltage source)?

Please produce, building fire fighting systems videos as per NFPA

Hello The channel is very helpful. But there were two questions about this video. Why, when changing the position of the shutter when adjusting the position in the animation at the moment starting from 10.10, the shutter movement is not shown? during regulation, the pressure drop across the valve changes. And secondly, I did not understand how these valves help the chiller work in case of partial load when a low temperature difference occurs - reducing the flow does not help the chiller.

You said that PICVs don't work when combined with TRVs in two-pipe heating systems, but what about a TRV which is also a PICV? Danfoss (Dynamic Valve) and IMI Heimeier (Eclipse) both have such valves, are they suitable for two-pipe heating systems?

Good

Can a standard 2 port control valve be installed downstream of a PICV (no actuator on the PICV)? How does the modulating control of the 2 port control valve affect the operation of the PICV. Do they work against each other i.e when the 2 port control valve closes, does the PICV compensate to keep the flow constant?

Can a balancing valve be used on the hot water supply on the distributor with 2 heating circuits?

this also requires that the spring stiffness to remain constant or a predictable value, but springs wear over time i feel it will loose its stiffness, so how long do these things last?

@lifehealthandhappiness5661

3 жыл бұрын

On an average 8 to 10 years if maintained properly

Besides being a single valve body, do these function differently than using a modulating control valve in combination with an automatic flow control valve?

@lifehealthandhappiness5661

3 жыл бұрын

In automatic balancing valve the flow is fixed, but here you get a range of flow for each valve size which can be adjusted as per requirement.

9:57 Varaible -> Variable

Hi, Very nice video. Can you please let me know how it will avoid overflow in part load operation when PICV is used in constant speed pump. Pls explain as I didn't get that point.

@jamesch770

3 жыл бұрын

When the system is in part load, that means some branches of pipework are closed off or at low flow. That causes the pressure of the system to increase. When this higher pressure water enters the PICV, it will cause the diaphragm to restrict the flow of water going to the outlet, making sure that the flowrate of water going to the outlet is constant.

@ganeshkamble6892

3 жыл бұрын

@@jamesch770 Thanks

@ibrahimhalil7391

2 жыл бұрын

Hi, may I ask that our AHU is having 5 l/s flow rate and PİCV selection is made as per 6 l/s .. will this PICV work properly?

@selviyantih3435

2 жыл бұрын

@@ibrahimhalil7391 i believe shown in the video that flowrate can be adjusted

Dear The Engineering Mindsets at 5:42 you've said pressure increases then flow rate increases then velocity increases . Isn't pressure and velocity inversely proportional ? . Then how come pressure and velocity increases at same time . Kindly clear my doubt and please tell me I'm right or wrong .

@vigneshmaharajan2235

4 жыл бұрын

I too have same doubt regarding this content . Can you tell me the reason ? @the engineering mindset

How does a Posi-Temp shower valve work

🙏🙏

Seems like a great retrofit on a monoflow T but its not a T so not so much

Hello, I study electric engineering in college in Russia, you are making amazing videos, let's create Russian subchannel, I could translate.

5:11 One or two "L", make your choice

@bjarnivalur6330

4 жыл бұрын

Three, take it or leave it.

@rondlh20

4 жыл бұрын

@@bjarnivalur6330 You got a deal sir!

Sir, How can we use PIVC for larger pipe size .

@lifehealthandhappiness5661

3 жыл бұрын

It comes up to 250 mm size and in bigger sizes 65 mm and above it has flanged end connection

Completely off topic - just a question I've had a long time, & didn't find topic. My question is about attenuators , or light dimmers. When you use a household light dimmer in you home to set mood, at night, let's say, and you dim you light to a faint glow - I know the light bulb itself [filament] is not burning energy, & you're not paying for electricity like if that bulb were straight-on at full brightness. My question is about that dimmer, & it's process... Am I still using the same amount of electricity - with the dimmed output process still using the same amount of juice as the dimmer's resistance deflects energy from the bulb? Does the dimmer chock the electric output, block it, or consume it? Thanks - Brad

@K-carbon

4 жыл бұрын

Basically the dimmer gets rid of the unwanted electrical true heat there copper winding in the dimmer switch

The way this thing looks, would backwash i guess, like turbulent flow, circulation within the PICV be a problem??? From what little I know, those fluid dynamics consideration would be a problem I think....and also lets say the pressure increases on the high pressure side, the goal is to maintain constant flow not constant pressure on the low pressure side right? But intuitivetlyIt seems like inevitably that the pressure will increase no matter what to make the fluid flow rate the same, for example in electricity, the resistance increases, but to maintain the same amount of current i.e. fluid flow, the pressure or (voltage) must also increase to maintain the same amount of current or flow rate? Its hard to imagine the same flow rate without a fluctuation in pressure as well.....someone please comment on all of this...

What is an air hnalding unit?

is there any disadvantage about PICV?

Are you talking about pilot valves?

valve open or close, when we off the machine

This is the same as air compressor pressure regulator?

@EngineeringMindset

4 жыл бұрын

Not quite

@rajdme6490

4 жыл бұрын

Thanks bro Humidifier dehumidifier explain videos pls send

First

@EngineeringMindset

4 жыл бұрын

Fast, well done

It doesn’t sense temperature difference tho

The last 3 minutes confused me as I didn't properly understand the drawing

please comment in Hindi bro.

Is it a kind of double regulating valve? If no, what's the main difference?

@lifehealthandhappiness5661

3 жыл бұрын

It also does controlling and dynamic balancing