🔴 How to solder NAND wires to the console - kzread.info/dash/bejne/ZWajrrNvhcTZgMY.html

If you are getting “Header is Wrong” using the PicoFlasher and maybe other flashers… it’s because your wires from the flasher to the Xbox are to LONG. I made this mistake, my wires were around 20inches long and I was get this error. They are now around 6-9 inches long and it works perfectly fine now. Please pass this along, that the NAND wires need to be short…. Maybe at most 10 inches long. P.S. Thank you for sharing this video with us all.

Looking forward to seeing more m8, keep it up.

@TheModSmith

2 жыл бұрын

More to come!

Can i use my own wires to solder to the pico or do i have to buy the nand wires?

can i use the pico to program my glitch chip?

Great work. Thanks the guide. I'm ordering some pico pi now

@TheModSmith

2 жыл бұрын

Thank you very much, I'm glad that the guide helped you.

Is there any point in soldering the headers on the opposite side of the Pico since your only using the one side?

@TheModSmith

2 жыл бұрын

4GB Corona’s will use the opposite side, I also like having it level when sitting on my desk.

Bruh back in my day it was much more magyver styler wires to the nand on the board and soldering lol

@TheModSmith

2 жыл бұрын

Soldering wires to the JTAG headers on the motherboard is still required in order to read the NAND.

@zNyVa

2 жыл бұрын

@@TheModSmith ahh okay yes this was how we used to do it

Would this work with a pi that has pre-soldered headers from pi hut

@TheModSmith

2 жыл бұрын

Yes, Pin headers are nothing special, it's just an easier way of connecting wires.

@consoleheaven3546

2 жыл бұрын

@@TheModSmith Thank you, would the wires still plug into the same place because I noticed the pre soldered one has the pins headers on the other side of the pico than yours.

@TheModSmith

2 жыл бұрын

@@consoleheaven3546 The orientation of the pin headers does not matter as long as the dupont cables are connected to the same pads.

my xbox360 is trinity will that picoboot work on in and what its feature and do i need another modchip or not

@TheModSmith

2 жыл бұрын

The PicoFlasher supports all versions of the Xbox 360, including Trinity consoles. RGH3 would allow you to glitch the console without a modchip, but requires some difficult soldering. These are very basic questions that you should research because you even consider touching your console.

@joemusashi2701

2 жыл бұрын

@@TheModSmith so you are telling me that i can install it with my xbox360 without any problem but what does that picoboot will give for my xbox360

@TheModSmith

2 жыл бұрын

@@joemusashi2701 I do not understand what you’re asking. To prevent filling up my KZread comments, feel free to join my Discord group and tag somebody of the support team role in the general-support channel: discord.gg/u73T6dF2eM

How do I get the stuff of your xbox folder?

@TheModSmith

2 жыл бұрын

You can download JRunner with Extras from the link in the description. My folders just contain stuff like NAND backups and Games which I cannot share publicly.

@HDesign75

2 жыл бұрын

@@TheModSmith I understand that but after downloading I couldn't find the pictures for the wiring diagram. Where can I get these pictures?

@TheModSmith

2 жыл бұрын

@@HDesign75 They are all featured on TheWeekendModder's website: weekendmodder.com/picoflasher

@HDesign75

2 жыл бұрын

@@TheModSmith Thank you very much, I ordered the rapberry pi pico.

The xFlasher is the best one to get, as it does all consoles that are moddable. Of course the only one that isn't, is the Winchester model.

@TheModSmith

Жыл бұрын

The PicoFlasher does also support all of the consoles, the same as the xFlasher.

@bryancampbell4604

Жыл бұрын

@@TheModSmith But is it quick to change the wiring, or do you need to desolder and solder to new points?

@TheModSmith

Жыл бұрын

@@bryancampbell4604 No, just use Dupont cables like I showed in this video and it’s exactly the same as the xFlasher.

Hey my man where do I get all of those files and folders that you have at kzread.info/dash/bejne/iZeOscSdnLm3aLA.html please? The last RGH I ever did was RGH2 and then before that I was doing J-tagging so I'm really looking forward to doing this new RGH3 on Trinity/Corona but as it as been years since I did any type of glitch/hack and I will be using a pico Flashers as my reader/writer device I'm completely starting from scratch. Thanks for the great vids anyway buddy I cannot wait to get cracking at this again and getting back into soldering and modding and getting myself a great Xbox slim emulator device for my projector.

@TheModSmith

11 ай бұрын

My folders are just publicly accessible files but in an organised form. Here are some useful links: JRunner with Extras: github.com/Octal450/J-Runner-with-Extras PicoFlasher: github.com/X360Tools/PicoFlasher