Hi Aaron. PicoFlasher will be added into the main J-Runner with Extras in the next release with bugfixes and such.

@TheWeekendModder

2 жыл бұрын

Awesome!

@bogdanshumilo

2 жыл бұрын

@@TheWeekendModder kzread.info/dash/bejne/eadpzZieYqyWfLg.html

@bogdanshumilo

2 жыл бұрын

@@TheWeekendModder I have error

@hphp7587

2 жыл бұрын

The guy balika released a new jrunner pro version and pico flasher firmware just now. Defender detects a virus, also I am getting frequent crashes in windows 10. Sometimes gives error message "pico flasher firmware not updated" message. It still needs work i guess.

@Josh.Davidson

2 жыл бұрын

J-Runner with Extras V3.1.1 now supports Pico Flasher.

Thank you for your detailed videos. I have learned how to RGH consoles last year around November following your tutorials. Keep up they great work, because someone is always watching and learning as I did and still learning. Thanks.

@youcantstopme5136

2 жыл бұрын

Same here but I still make some mistakes

@cleberlopes5021

2 жыл бұрын

r t5😢😢g😢😢😢t

So awesome! Glad you're back! You've helped me a lot on understanding rgh and I'm so grateful for that! I'll try to build my picoflasher.

If you are getting “Header is Wrong” using the PicoFlasher and maybe other flashers… it’s because your wires from the flasher to the Xbox are to LONG. I made this mistake, my wires were around 20inches long and I was get this error. They are now around 6-9 inches long and it works perfectly fine now. Please pass this along, that the NAND wires need to be short…. Maybe at most 10 inches long. P.S. Thank you for sharing this video with us all.

@fliper975

4 ай бұрын

I setup my nand and pico last night. Over a year after you left this comment. It wasn't working, (reading, but not identifying the console)... I even tested continuity from the pico to alternate points on the board. Going to shorten the wires tonight when I get home. Hope it works, godspeed sir 🫡

@masterchef2408

4 ай бұрын

@@fliper975 let me know if it still does not work. I can try to help you out.

@fliper975

4 ай бұрын

@masterchef2408 I shortened up the wires and it worked like a charm! I didn't even think about it being a low voltage signal over such long wires. Was able to RGH my falcon, thank you.

Thanks, man! And thanks again for those QSBs! I'll be giving this a shot this weekend hopefully! Your green screen outline is tripping me out :p. So glad to see you dive back into the scene headfirst!

Wow!! I was expecting speeds like the EPS32 that has been used to read Nands but that speed is like an Xflasher!!

the WM is back! happy new Year our kid!

Great!!! Thanks bro. Its good to know you are back

Hello, I have a problem here, I managed to damage my 4gb Corona (v4) and I turned it into Corona V3, did the RGH 3 wiring with voltage fix, the thing is that it already had a R2C10 resistor with a value of 100 ohms but when turning to v3 I replaced it with a 0 ohm resistor despite I don't know if necessary, bought Raspbery Pi Pico just today, everything worked fine, did 2 nand reads and it said both were the same, created ECC for RGH 3 but when trying to Write it Jrunner console Said Error and some numbers like "Error 8071" or something like that, damn! I knew it couldn't be so easy, I turned everything off and reconnect it again but now Jrunner don't read my nand, it just closes when I try to make a nand read. It closes everytime I read it, I don't know what to do, do anyone here know how to solve this problem? I'm really sad since I've put a lot of work in this corona :'(

Thanks for the video! I’ve had too many costly NANDX programmers take a crap and I couldn’t use it on my newer PC. Had a use it on an older PC with Windows 7. Decided to try something else. So far I’ve flashed 2 Jasper consoles with the Pico and they’ve been a success. 1 big block and 1 (16mb) on Windows 10. So much faster! I may never go back to NANDX again. Picked up 3 Picos for half the price of a NANDX. Thanks again!

When i connected the xbox 360 to a tv the screen stayed blank no matter how many different screens and cables i tried. I still have not seen the Xell screen to get the ip address or cpu key.

Hi, may I ask pico flasher can write timing file to coolrunner/matrix/ace glitch board? If so, how. Appreciated.

do you also have to solder a resistor and a diode to the board? like on the guide of XBOX360HUB? going to mod my xbox this weekend. did order the things. but if not needed, then i'm not gonna bother doing it.

Hi Aaron. Any fix to Falcon board which doesn't boot after writing ecc with J-Runner 3.2.0 and Pico Flasher? I mean, when I try to power up my console and get my cpu key, I can't, because I cannot see any signal neither hdmi or av. Basically doesn't glitch or boot to it. Instantly it shutdowns by itself. And I can't get my cpu key by this issue. Need some help, I've done everything as described using AMS1117-1.2v then Pico Flasher and every wire that I've welded are pretty ok... I'm stuck, idk what can I do.. Thanks!

what soldering iron are you useing

Hello friend I'm Artemis here from Brazil I would like to ask a question I have downloaded j Renner and connected the picoflash the way you taught there is only one problem every time I try to download the file and play in the root it disconnects and does not appear in j runner the logo to be used has something else to be done some kind of configuration because every time I try to play in the root of the drivers to be used in picoflash it disconnects and the logo does not appear in j runner, would you have a tip for give us to solve this little problem

The pin headers on my Pico are on the back and yours are on the front, does that matter?

Glad to see you back.

where can i find xFlasher 360 i've been looking for it

Love how you go out of your 2ay to give credit where it's due

Could this be applied to Raspberry pi4?

Can the nandx read and write nand on a corona 4gb?

Will this work in 512 mb Nand BB Jasper?

Thanks for the information. For an Xbox360 noob like me, it helps a lot.

Work for read nand in jasper 256mb?

greeting Weekend Modder i have some issue with pico flasher when i reading the nand after that 2 identical nand too many bad block i try slim, falcon, jasper with jrunner pro 3.2.0 using pico flasher v3 firmware .

Can Rgh3 be done with pi pico?

а как он показывает в диспетчере устройств?

Hi buddy could you do a updated video as pico has a emmc support which come out 9 days ago

my trusty years old nand-x is just fine as it is. but it won't hurt to learn to set this up. specially if this reads nand faster than nandx. thanks for the guide weekendmodder.

Hello, what about arduino? are you try it?

Great Job. Perfect for RGH 3.

how to install rpi pivo on win 7 please

sorry for dumb question but when finishing up with rgh 3 and putting the console back together do I remove the solder for the nand or does it stay connected?

@MP5GoBrrt195

2 жыл бұрын

u unsolder it

@gators4592

2 жыл бұрын

@@MP5GoBrrt195 thank you

Thanx master ♥️

Hey bud I'm having an error 0xFFFFFFFF Console not found I have a 16mb Corona V3 and I bridged R2C10 to enable R/W and I checked my wiring ALOT and I applied standby power

@facundogomez8438

Жыл бұрын

do u fix it?

Hola amigo, super buen canal !.. consulta se podra instalar algun codigo similar en arduino nano para que trabaje de la misma manera con jrunner?.. saludos!

Awesome!!

In May 2019 I did RGH 1.2 to an old Jasper V1 with the JR-P and that thing was SLOW compared to when I used the Pico for my Trinity's RGH 3.

Can the Pico flasher be used more than once on different consoles Trinity and Corona?

@TheWeekendModder

Жыл бұрын

Yes, absolutely

WoW! Grade Flasher! Tnaks for Video!

would be it somehow possible with an rpi zero

Thanks for your excellent video. It doesn't work for me in my Windows 7, the Jrunner does recognize the PicoFlash but when I read it it closes and shows a window with an error. I have checked the device manager and it appears but with a warning symbol, as if it had no driver. Any suggestion please. It is in version 3, the same thing happens to me in 1 and 2. Thanks in advance for the help.

@TheWeekendModder

2 жыл бұрын

You need ZAdig to make it work on Win 7.

@marvicdigital

2 жыл бұрын

@@TheWeekendModder thanks is fine now. thanks thanks.

Thanks for this interesting video.

Dude am having really serious issues with coronas 4g nands , just not detected

Hello Weekend Modder, I saw that you didnt update the jrunner becouse we didnt know if the updated version contain support for the picoflasher. After this time is it safe to update it or no?

@TheWeekendModder

2 жыл бұрын

Yes.

@frantisekskudrna9232

2 жыл бұрын

@@TheWeekendModder Thanks man!

Hey man! Good to see you post again, any chance on getting a video on RGH 3.0? Interested on your thoughts about it, one of the biggest things to happen in the modding scene for years

@TheWeekendModder

2 жыл бұрын

It's coming. Trinity RGH3 first. Teaser: weekendmodder.com/RGH3-Trinity.html

@ariepou9424

2 жыл бұрын

Nice to cu back wm, ill be looking forward for the video👍🏼 P.s is it possible to do it straight for a already modded 360 or from a fresh start?

Great for people in small countries which is almost impossible and expensive as heck to get our hands on nandx or jr programmer. I'll be trying RGH3 on a Jasper with this, wish me luck

@AR-ey1ur

2 жыл бұрын

How did it go with your Jasper? RGH3 is still in beta for phats...

@timoarrg

2 жыл бұрын

@@AR-ey1ur I got into some trouble with my main console because I used single stranded lan cable and it turned out to be way too thick. Now I bought 28 awg wire and it is working perfectly, it almost always insta boots or takes 2 pulses at worst

@AR-ey1ur

2 жыл бұрын

@@timoarrg Thanks for sharing your positive experience with phats and RGH3.0. I wasn't sure if I should do RGH1.2 or RGH3.0. Many people advised me to do 1.2, because 3.0 isn't quite ready for phats.

@timoarrg

2 жыл бұрын

@@AR-ey1ur i mean you don't lose anything giving it a try, in the end it's just two wires. Definitely the best option for a beginner (like me) but you may be unlucky and it may not work well on your phat, in that case yes, 1.2 is the best option as it is far more reliable, but give it a try. I'd recommend you to use the alternative Db1f1 Point though so the whole install is under the motherboard and looks cleaner and more professional overall, you also make the wiring shorter which gives you better chances of it working properly. And last but not least, be careful with the pads! It's easy to rip them off if you pull on the cables

Great Job! Maybe in the next video you could also follow the steps to do an RGH3?

@TheWeekendModder

2 жыл бұрын

Already have: kzread.info/dash/bejne/iZadlqRsl9fXmdo.html

Hello can someone help me please I recently brought a xbox 360 phat falcon and the dashboard is 2.0 16202.0 is this able to be rgh1??

@TheWeekendModder

2 жыл бұрын

No

@juggalogamer9980

2 жыл бұрын

@@TheWeekendModder cheers

@jayc.landgraf6828

Жыл бұрын

To anyone reading this in the future: RGH 1 ONLY works on dashboards 14699 or older. If you're on something newer RGH 1.2 or 3 is the best.

As the pico has its own cpu, will this support 4gb corona?

@TheWeekendModder

2 жыл бұрын

Will it? Maybe... Does it currently? No.

can i use the pico to program my glitch chip? I cant seem to find ant resources

@TheWeekendModder

6 ай бұрын

I think there is a method called "DirtyPico" which can be used to flash a glitch chip using the PIco. Check info here: www.se7ensins.com/forums/threads/j-runner-with-extras-dirtypico360-program-timing-files-to-glitch-chips-using-a-pico.1844370/

@roborat

6 ай бұрын

@TheWeekendModder thanks much, I did run through this and it says failed, but the post says sometimes it will say that and still be programmed so

That is brilliant :)

I still have the maximus lizard for dvd drives

Hello. PicoFlasher 4gb R/W Diagram GP7 and GP8 connection seems to be reversed.

@TheWeekendModder

2 жыл бұрын

Indeed! Great catch. I'm gonna pull the image for tonight and get it updated tomorrow!

@TheWeekendModder

2 жыл бұрын

Fixed!

Will this ever be able to read 4gb nands?

@TheWeekendModder

2 жыл бұрын

Maybe! Go make a donation to @balika011 to support development of 4gb read / write ability!

Exelente video, es muy fácil leer la Nand de Trinity 16mb y además puedes leer nand de 4gb. RGH3 Go

@30.33mm

2 жыл бұрын

Amigo

@30.33mm

2 жыл бұрын

No meu não funciona

@30.33mm

2 жыл бұрын

Apresenta um erro

@30.33mm

2 жыл бұрын

"unknown flash config

@30.33mm

2 жыл бұрын

Estou com um chip rgh 1.0 amarelo

Good video

Can I just used my raspberry pi 4 for this?

@timoarrg

2 жыл бұрын

No

You are the best xbox 360 moder in the world .... No comments

Does this work with corona 4gb?

@gehx

2 жыл бұрын

no

@Luctaris

2 жыл бұрын

It does now, the creator added emmc support (4gb r/w) earlier last week.

seems better than the JR Programmer for reading or flashing the nand but the JR Programmer has more compatibility like sonus 360 and timing files and not to mention it works on older jrunner versions like the one modified by BenMitnicK were my xflasher360 doesnt!

@TheWeekendModder

2 жыл бұрын

I didn't cover it as I don't use Sonus but it does actually support Sonus programming.

@WisconsinJimmyN

2 жыл бұрын

I'm glad you mentioned the sonus 360. Would you by chance have details on direct wiring for adding sound on Coronas? There is a great video in this bon You Tube for Trinitys but not for Coronas. I've done many Trinitys with the JRP but I noticed the Coronas points are different.

@TheWeekendModder

2 жыл бұрын

@@WisconsinJimmyN no there's no chance of me doing that I just have zero interest in the Sonos personally so I've never done them at all sorry

Tnx for driver

pico cannot spi erase nand. read write super fast.

I’m really happy to see you post again and watched a lot of your previous videos, i had a problem programming my ace v3’s it does not want to program the chip no matter what I do, I use a jr programmer, the v3’s all don’t program but they come corona programmed and my corona was modded with some issues, any suggestions, thank you

@Hamed-xz9qt

2 жыл бұрын

Hello my friend، This problem can be from the JR-Programmer firmware. You can flash your JR-Programmer piece again and then program the ace v3, the JR-Programmer flash files are in the J-Runner

If anyone is having an issue with getting their NAND read with the PicoFlasher. Try this. First reflash the .u2 file to the Pico. If that still does not get the Flasher to see the console then if you have a spare around, try another Pico. I redid my soldering (redid it for good measure to eliminate variables) and still the Flasher could not see the Console. So I said F it! Grabbed a spare Pico and flashed it, hooked it up. VOILA !!!! Read the console and NAND right away. This was an official Pico too, so not a cheap clone. It seems these little boards are fragile or just maybe temperamental. So if all else is failing you and your soldering job is A Okay! with still no reading of the NAND, try another Pico.

So what about time??

What’s good bro

Esp32? show!

OMG. You haven't uploaded for awhile. Lol

Anyone curious about this I'm just saying I've done 3 consoles with this and it's super easy. It's definitely better and easier if you solder. Not for novice modders.

Do rgh 3 tutorials for slims

@SLAPPY4241

2 жыл бұрын

It’s Easy bro

@TheWeekendModder

2 жыл бұрын

It's coming. Trinity first. Teaser: weekendmodder.com/RGH3-Trinity.html

WTF, your eating on MIC lol

Do rgh3

Pick sucks on 4g corona.

What the fuck!!!!

it's okay with pico w. WiFi ?

When I press read nand, this problem appears: Unhandled exception has occurred in your application. If you dick Continue, the application will ignore this error and attempt to continue. If you dick Quit, the application will dose immediately. Object reference not set to an instance of an object.