Thank you so much. An engineer talking like an engineer to budding engineers. Suscribed! (From a 71 yr old Engineer)

@lorisrobots

5 ай бұрын

Thanks for the compliment but I have to admit, I am not a trained engineer. I am a retired statistician. I am enjoying learning electronics as a hobby. Thanks for subscribing and watching!

A great start to get my Pico W up and running. As a retired engineering lecturer I really do appreciate the detail and the complete steps given, so many other lessons gloss over the "bits" one really needs to know. Many thanks and I have subscribed 🙂

@lorisrobots

6 ай бұрын

Thanks for watching and your feedback. I am retired too from a career as a statistician in the engineering and sciences areas. These videos are my retirement journey in learning electronics and robotics. Not even close to an expert but I do enjoy trying to explain things in plain language. If I can explain it on a video that means that I have learned the material reasonably well. Cheers!

Well presented ! From my experience you can use label 'LED' with oridinary Picos (aka non-PicoW) as well. I did stumble over that when trying to run the same code on both Pico and PicoW recently

@lorisrobots

7 күн бұрын

I will have to give that I try. It has been ages since I played with the internal LED. Thanks for watching!

Quite helpful, thanks

@lorisrobots

3 ай бұрын

Thanks for watching!

This is super useful, subscribed! Ordered a Pico W today because it was available, but was all at sea regards header pins and installing micro python … you guided through the process so completely and helpfully (you could easily have left out a step in the process in assuming knowledge of this or that, but I’m very grateful you didn’t 😊)

@lorisrobots

Жыл бұрын

Glad it helped. Thanks for subscribing and watching!

awesome video! really helped me connect the dots as to what was happening throughout the process.

@lorisrobots

Жыл бұрын

Glad it was helpful. Thanks for watching!

Thanks for this nice video, I’m glad it popped up in my iTunes feed this morning. I’m glad you started with the soldering of the headers. Frankly I bought a pico with the headers on already because while I have soldered in the past, I’m intimidated by it. I think I’ll try again. As for editors, I started with Mu, and I really like it. I use it for my Microbit, adafruit boards and playing around with python. I’m just a retired novice having fun learning.

@lorisrobots

Жыл бұрын

I am retired too and started learning electronics over a year ago. Mu is a fine editor - whatever works for you! I am still trying to improve my soldering skills. You just have to jump in and be OK with making a few mistakes. Thanks for watching!

Nice video! Simon Monk is quickly becoming my favorite author. He writes a lot of good books on programming and electronics.

@lorisrobots

Жыл бұрын

Thanks for watching!

Subscribed. Been setting up a Raspberry Pi "lab" and tools for electronics (breadboards, resistors, soldering...) recently and I wanted to include a bit of Pico W at some point.

@lorisrobots

Жыл бұрын

Thanks for watching!

Love Love Love your video. So simple to follow. I am hitting the subscribe and a thumbs up I has already selected before. Thank you for your time. God bless and have a great day.

@lorisrobots

Жыл бұрын

Thanks for watching!

wow i like you the you teach is clam clear stredie remind me of a shcool teacther like you are the 1 person on here that i really under stood the way you speak very slow and very detailed not like you was in a rush to go some were i got a bunch of boards the pico iv had for two years and havent been able to do anything but thank you for being a wonderful teacher so you now have a new sudent and fan of your channel i hope to learn more from you i have all kinds of unos r3 heltec wifi boards even just got a lilygo with like 4 diffrent chips and a pico in it like that one is the koolest

@lorisrobots

Жыл бұрын

Thanks for Watching!

Thanks this is useful information & this is what I was searching

@lorisrobots

Жыл бұрын

Glad it helped. Thanks for watching!

Well done!

@lorisrobots

Жыл бұрын

Thanks for watching!

Great stuff. I am surprised you don't have more subscribers,

@lorisrobots

Жыл бұрын

I am just really starting to make reasonable videos. Thanks for watching!

one extra step I do before soldering is to rub the contacts lightly with a fine emery cloth or other light abrasive to remove a layer of oxidation on the solder tabs. that really makes the solder flow better. also .8mm 37/63 solder but I also use a lot of 60/40 multicore solder and have no problem using it instead of 37/63.

@lorisrobots

Жыл бұрын

Nice solder tip! Thanks for watching!

Nice

@lorisrobots

Жыл бұрын

Thanks for watching!

No matter what I try [reload, restart, reinstall, change cable] my Pico does not show up on the drives. It did initially but now a day later it doesn't. Any guidance please? BTW Win11 and all up to date. VPN off ... NO sign on device manager ports either. Help!

I enjoyed your video :) and subscribed thank you for making this content.

@lorisrobots

Жыл бұрын

Thanks for watching!

Great tutorial 👌

@lorisrobots

Жыл бұрын

Thanks for watching!

Which mac OS are you running ?

@lorisrobots

Жыл бұрын

Ventura 13.2. Thanks for watching!