A thing of beauty. The color is outstanding 😅😅😅😅

This is one sick looking and sounding whip. Congrats my dude.

The video I've been waiting all week for

Blower cam and forged pistons and rods this thing gonna rip!!! Congrats

@josepineda9740

3 жыл бұрын

How much would that be ?

@milk294

Жыл бұрын

@@josepineda9740 about $15k if you send it to a shop but cheaper if you do it yourself

@thefoodcan

Жыл бұрын

Lt1 can handle 800hp stock of you gap the rings,l for boost, as they are gapped for NA applications. At that point, I guess whey not throw some 1000hp rods in it.

2019 Camaro SS Just did my 2019 Camaro SS. Carbon Fiber Hood and Zl1 aftermarket Front bumper for weight loss . CamMotionCam , Johnson Lifters , C5R Chain , VVT Lock Out , ARP Bolts and Studs , Brian Tooley Lifter Trays And Valve Train Components, Valves Springs, DOD Plugs, Head Gasket and Head Bolts. Installed DSX E85 Flex Fuel Kit With Sensor + Motorad Thermostat / American Racing Headers With X Pipes Straight Pipe x Corsa NPP Mufflers, forged Wiseco Pistons , and Rods. I Just ordered the Magnuson 2650 with Lt4 Injectors and Fuel Pump and NW 102 mm throttle Body . Ready for this !

I have the exact car with the color and pin stripping.... I’m about to supercharge mine and I’m researching superchargers to see what I’m gonna go with and the 2650 is nice! Beautiful car and good content!

@justinmalpass4621

3 жыл бұрын

The Maggie and whipple are good and so are ecs for a centrifugal system. If there’s any questions on it message me on ig 🤙🏻

Holy cow that’s awesome..!

Fire vid man 💪🏽🔥🔥

congrats bro. looking to do the same on my 2021 2SS.

@justinmalpass4621

3 жыл бұрын

If you have any more detailed info you want feel free to send me a DM on ig man. I’ll be making another video shortly if what it’s like to drive this thing daily for almost 6 months

Also how long did it take for install? And u got a catch can headers and cam? Whats your full mod list ?

What kind of problem had the car with 103mm TB and snout? anyway amazing Camaro bro!

dope ass ride man

That tunnel view!! 5:05💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾

I got a 2018 ss and I was looking at doing this super charger is it really even worth the kinda money though like power wise can you feel the difference.

3:40 What is all the wet spots after it was parked ?

Can you actually hear the whine pretty good?

Great video and congratulations!! How is the mpg since adding the injectors and fuel pump?

@justinmalpass4621

3 жыл бұрын

Hahaha... half of what it normally is but also that has a little to do with e85 as well. I appreciate the support 🙏🏻

Did you have to change your fuel system to run e85 or you are running 93 only?

Nice 👍🏽, I have a 2017 with 46k miles do you recommend supercharging it at that mileage and if so should I replace any parts while it’s being installed ?

Hey, understand this video is 2 yrs old, do you still have this Camaro and if so are you happy with JEP Autoworks work? Considering using them in the future for my Camaro.

@Just_BayArea_SS How much RWHP and RWTQ does this build produce? Also, what was the final price after completion? Also curious, since you uploaded this video almost 5 months ago now, have you experienced any issues at all with the car post build?

@justinmalpass4621

3 жыл бұрын

I am going to make a new video of how it’s been, but basically it’s been great. The 660/599 hp and torque numbers are at the rear wheels. I bought the build over time in pieces so it was in between $13-16k. Thank you for watching!

dyno numbers please??? how much was the build? thanks

Does the car have aftermarket pistons

What is the build list?

WHAT WAS THE TOTAL PRICE OF INSTALL

how much was it total to get your car supercharged ive got a 2020 ss

How did you fit an 11/12" setup on SS fenders without the tire poke? Did you have rubbing issues anywhere?

@justinmalpass4621

3 жыл бұрын

The rears are fine, the fronts are an issue. I run 2.6 camber so that it just tucks and rather than the stock 305 tires that normally come on the front i have 295

What exhaust is on there?

Wow! That’s a beast!!, how much does that package cost?

@patrickdumont1249

3 жыл бұрын

100,000 $

@Highlander1432

3 жыл бұрын

@@patrickdumont1249 haha

@justinmalpass4621

3 жыл бұрын

I actually don’t know cause i bought over time but it’s between $13-16k

ima sub because of 1:26

Yo what is the mod list for your ss

my cts v has the same problem

Nice car! How do you go about passing smog in Cali with all those mods?

@imowgrass

13 күн бұрын

ZL1's exist in California. Keep it around that, should do just fine.

Who did the work? I can see your in the Northern California from the Caldecott Tunnel. Looking to mod and tune my Camaro...

@justinmalpass4621

3 жыл бұрын

Hey just seeing this. I do live in the east bay but hit up CCNC. He’s in Fremont

@Secondson97

11 ай бұрын

Who does your smog is the even better question?! I have a 2022 SS looking to mod it

And hows it doing

With the off-set tb, did you buy a different hose/elbow for the cai? I have k&n cai

So how much hp is it 650? I read it puts out 590 whp

@mjc3502

3 жыл бұрын

I guess he isn't responding to your question. I'm curious too. I have a zl1 with almost 800hp to the tire. Stock ported blower, pump gas still.

Oh boy you managed 660 .. ish with this set up? that’s insane with no meth or headers just straight up CAI TB and snout ?. My vette is at the shop now similar blower with zo6 high side system and long tube headers to bleed out some boost with 100% meth injection however, mine will be stock TB and snout though hope I get near 650 I’ll be more than happy lool.

@justinmalpass4621

3 жыл бұрын

I have headers but yeah. The biggest thing was e. Their first pull with mostly just 91 was i think 580 or so. Then with the e it made a huge different. The meth on yours will add some power and cooling as well. Let me know your numbers I’m curious!

@alilari1175

3 жыл бұрын

@@justinmalpass4621 For sure man ill share with u my dynojet sheet once tuned, we do have 95 octane in middle east fortunately but weather Temp is a BITCH and knock/detonation is our biggest concern when going FI some tuners even refuse to past 600rwhp on stock pistons lool ill see how mine goes. the installation is over However, I'm still waiting for my A pillar gauge pods to be carbon fiber dipped should be sick.

upgraded bottom end or anything ?

@justinmalpass4621

3 жыл бұрын

No sir, living on the edge 😂 it’s going to get forged internals here after winter.

@RelentlessDH

3 жыл бұрын

@@justinmalpass4621 ahhah oh damn!! gotta be careful on these LT1s they so weak ! Good build bro.. i thought about going procharger on my LT1 but dang that magnuson looks mean

@justinmalpass4621

3 жыл бұрын

@@RelentlessDH you should reach out to @ccnc_official over ig if you haven’t gone too far into a build yet. I know 5 people that have gotten work done by him and brc raceworks. Everybody super happy and great power 🤙🏻

Stock hood?

@justinmalpass4621

3 жыл бұрын

It is stock hood. The 2650 just fits snug but i am looking for a good aftermarket one. Probably Anderson composites

??? HUMMM!!! ..The car pulls up and backs in at 0:45 . And there is a little Oil stain on the ground !! And when he leaves! At 3:42 There is a Shit load of Some kind of Fluid ( Trans/engine oil/Brake fluid ) on the ground. ????????????? Just sayin!

@justinmalpass4621

3 жыл бұрын

That parking lot has oil stains everywhere! When the car pulls away later it’s water and some soap that was still there. Ccnc always wants to make sure the clients car is super clean when they pick it up but i somewhat rushed him so he didn’t get a good chance to dry it all off 😆

Invest in a “mighty mouse” vented catch can for sure. If anything!!! Front crank seals may give up unexpectedly bro…pain in da ass!!! Wound up going forged internals, heads done & stage 2 cam with supporting BTR LT1 springs, push rods, and “Johnson lifters”, LT4 injectors & high side. The GM LS7 new lifters had a failure on #1 intake. (After 500 miles) Can you believe it??? Do it completely and Alky Control that ride…pay now or pay later. Now I can enjoy my Whipple potential without tweaking something. Beautiful ride brother…got that Gen 6 lookin!!! 😎🤙🏽 kzread.info/dash/bejne/c2qklciYgdirk5c.html

@ProGen6

2 жыл бұрын

How much power?

@TBSSPILOTviews

2 жыл бұрын

@@ProGen6 mine put down 634.8 rwhp on 91 octane tune. 9.5 psi.Tuner said even another 59-60 HP if I went E85, but it’s sufficient for me. Traction is an issue where it is right now…🥴

I would take the whipple with a cam. It might be pricey but you get so much powwaaa!

@justinmalpass4621

3 жыл бұрын

Whipple are great. Pricing is about the same but the cooling is way better on the Maggie, that’s the reason i went that way. Check out @ccnc_official page. I think the Maggie can do enough on the power front for me 🙃

@Tyee2

3 жыл бұрын

Whipple heat soak so damn much

@Kingg_G

3 жыл бұрын

Maggie makes more power,is more efficient and has better cooling.

@Highlander1432

3 жыл бұрын

Magnuson is superior by far to Whipple Much more reliable

@mjc3502

3 жыл бұрын

The Whipple has been shown not to make as much as the Maggie does. So, less power and heat soaks where as the Maggie cools the more you punch her.

Did those mods kill gas mileage?

@justinmalpass4621

3 жыл бұрын

Not much. If i cruise i can still get over 20mpg

@Boot-Cross

3 жыл бұрын

@@justinmalpass4621 ok. Thank you.

My S4 would eat this car up !!

@Kingg_G

3 жыл бұрын

🤣🤣🤣

@NAZTYPONY007

3 жыл бұрын

My TT 10speed coyote would eat that S4!!!

Yo More driving Less talking What is with these fucking KZread guys not driving their cars ?

@noahp2430

Жыл бұрын

For real