phil vandelay 2 x 72 belt grinder part 2
this is part 2 of my Phil Vandelay belt grinder build
here's part 3
• phil vandelay belt gri...
These are Only things from amazon that I personally like and buy for my own shop.
Flex Zilla retractable extention cord reel----- amzn.to/3ew4dce ----- Awesome tool to have I have 2. Theyre good quality but expensive (worth it in my opinon)
40-Pc wire wheel brushes for drill or die grinder----- amzn.to/3bajcX6 ----- Good selection of various wire wheels and theyre cheap.
LocTite 603----- amzn.to/3tuT8wn ----- I mean its loctite not much to say works great
Metabo flat head grinder----- amzn.to/3tzRadX ----- Metabo flat head grinder best of the best German made angle grinder for getting in tight spots ( I know the price sucks)
Dykem layout fluid 2 pack------- amzn.to/3etNXbK ----- blue layout fluid 2 pack (its alittle cheaper than buying 1)
Markal Pro holder starter kit----- amzn.to/3hcago7 ----- This is the silver streak pencil you always see on my channel for laying out steel I love it (expensive but all the good stuff is)
Starrett automatic center punch----- amzn.to/3y74YAq ------ Awesome starrett auto center punch that you see in my vids love it best there is
Scotch brite deburring wheel----- amzn.to/33r8Td3 ----- this is the bench grinder wheel that I love puts almost mirror finish on steel and deburrs also lasts a long time ( make sure you get the right arbor size)
Precision twist drill index----- amzn.to/3ergxum ------this is the 115 piece drill index you see on my channel all the time......they have been great for me and they arent chinese
Walter flap discs----- amzn.to/3hatCd8 -----these are the flap discs you see on all my grinders. they are the best there are german made and trimable for longer use the only kind i use ( but very expensive)
Noga mister------ amzn.to/3h86P1L ----- This the little noga mister that I use on my mill it works well for the bridgeport
BXA tool post ------ amzn.to/2T0rBGw ------ this is the quick change toolpost and tool holders set (size BXA) that i bought for my lathe its chinese but good quality I have been very happy with it
Racheting tap handle -------- amzn.to/3wSJRAm ------ this is the racheting tap handle you see me use all the time, I bought mine at harbor frieght originally but theyre chinese made and are identical probbably made in the same factory
Пікірлер: 50
Love to see chips fly. Coming together a piece at a time. You are showing great patients and where you would do things differently than how you did the first time. Bravo!
Aaron, I found your build, Thank You very much for taking the time to video your build, I have saved everyone into a separate Phil Vandelay Folder. Regards Dave.
Yes the tabs are a great idea. Makes clamping easier even with the added removal of the clamps and weld cleanup later. Nice idea!
@robbourns2831
9 ай бұрын
M😅okknnkknnb
I happened to get a recommendation from KZread on your mig cutting jig. Happy to have found the channel. Thanks for the content.
Wish I could be a bird on your shoulder this is awesome 😎 oh ❤️puppies 🤣
Can’t wait for the next one always good work coming out of your shop
@westweld
3 жыл бұрын
Thanks man I appreciate that
Probably never would’ve thought to weld on tabs to hold the material down better. Nice tip.
@westweld
2 жыл бұрын
The low profile clamps work better but this works good if you dont have any
That's was a low blow with the puppy. 😫Now I got to watch the next one!
nice great job with attention to detail, congratulations
Nice work, cute pup. 😀
That is a very nice job, I wish one could make one for me, defiantly something to be very proud of, nice.
I have no idea but for some reason I am watching this videos in reverse. I started with the last one. :D Enjoying them! Will be watching #1 in a few!
@westweld
3 жыл бұрын
Sorry the editing gets worse the farther back you go haha
@volksbugly
3 жыл бұрын
@@westweld haha I like it! I get to see how you have grown!
Good work. I also like your voice. Clear and calm. Sounds really professional, nice to listen to it. Good luck for your canal. Hope you will get more subscriber to keep coming more projects.
Nice dog, I like your approach will probably attempt this soon
Buen trabajo 👍 amigo 👌⚒️🔧😍
Very good machine
Can't wait to see the next video....
hey aaron, as a very very new builder i love your videos. keep up the great work!
@westweld
2 жыл бұрын
Hey thanks Man
Let’s see part 3!
Nice work 👍
@westweld
3 жыл бұрын
Thanks man
artist👍👍👍
Came for the grinder, Subscribed for the puppies :-)
Looks great. Subscribing!
Oh no! Please don't say I hate puppies!!! Nice video! Now on to part three!
Where is this fella havent seen him for a long while. Hope all is well
Looking good so far. Would you remake the part, or just build up a pad with weld and mill it to size?
@westweld
Жыл бұрын
I just remade it…..it was an easy enough part
Hey, I just bought Phil's plans and I am starting to do some take offs. I am in Canada so most of the stock is imperial measure here too. What nominal stock dimensions did you use for the 40x40mm arm and the main 15mm frame, and the 10mm plate too?
@westweld
2 жыл бұрын
I Did alot of machining of stock that was way too thick haha I had alot of 3/4 and 5/8 material around so thats what i used.....Really gives you a chance to dial in your feeds and speeds haha. I kept most of the dimensions the same and changed all the fasteners and threads. If you make changes make sure you follow the prints all the way to the end to determine down stream effects.
Why not use belleville washers to take up the play in that hinge?
@westweld
3 жыл бұрын
I made a new one..... easy part
what is your metal thickness?
May I know the meterials you mostly used? It doesn't look like aluminum.
@westweld
3 жыл бұрын
It is 1018 steel and some 4140 steel
@WannabeEwan
3 жыл бұрын
@@westweld thank you.
Доброго времени ! Есть пару вопросов по станку. Какой диаметр ведущего шкива и какая мощность двигателя и его обороты ? Good time ! There are a couple of questions about the machine. What is the diameter of the drive pulley and what is the engine power and rpm?
@westweld
3 жыл бұрын
Drive wheel is 7.75 inches and rpm is 3450
@user-ru3rn7hw3f
3 жыл бұрын
@@westweld Thank ! Very fast grinder.
More machining porn! I must get one of those insert chamfering tools.
Try to leave the words on the screen a little longer, if you can, Thanks. Great series !
@westweld
3 жыл бұрын
Thanks these were some of my first videos hopefully my new ones are a little better
We only don't like red-headed puppies.😃