PHARMACEUTICAL PRODUCTION INTERVIEW QUESTION AND ANSWERS FOR FRESHERS & EXPERIENCED | PHARMA JOBS
#PHARMACEUTICAL_PRODUCTION_INTERVIEW_QUESTION_ANSWERS
Questions and Answers #Pharma #Production
1) Define the tablet?
Ans) Tablet is a solid dosage form. It contains the Active pharmaceutical ingredient (API) along with the excipients.
2) Define API?
Ans) API, known as Active pharmaceutical Ingredient. It is the first and important ingredient in any drug formulation. It is a biologically active component responsible for the drug effect.
3) What is excipient and give any two examples with their use?
Ans) Excipient is an inactive or inert component of the drug formulation which is helpful for improving the tablet characteristics.
Examples: Diluents, useful for increasing the bulk volume of a tablet. Also used for improving the flow properties while compressing the tablet. Lubricants, useful for improving the flow properties while compressing the tablet.
4) Give the examples for diluents and lubricants?
Ans) Diluents- Mannitol, sorbitol, starch, lactose, sucrose etc.
Lubricants - Magnesium stearate, calcium stearate, stearic acid etc.
5) Name the tablet preparation methods?
Ans) Wet granulation, Dry granulation, Direct compression.
6) Explain the wet granulation, dry granulation and direct compression?
Ans) Wet granulation: It involves mixing, wet sieving, drying, dry screening and compression. API and excipients are mixed well, then binder solution/ granulation fluid added to form a wet mass, wet mass is screening through a suitable sieve, formed granules are dried. Dried granules are again screened through a sieve. It helps to break down the granule agglomerates to produce a compatible size for preparing the tablet. These same size granules blended and compressed.
Dry granulation: It involves mixing, slugging, screening and compression. API and Excipients are mixed well and particles are aggregated under high pressure for forming slugs. These slugs are screened to form uniform granules for compressing the tablets.
Direct compression: In this method, blend of API and Excipients are directly compressed to form tablets without changing physical nature of material itself.
Interview Questions & Answers on Pharmaceutical Production Jobs
7) Name any three tablet processing problems and explain it?
Ans) Mottling, Capping and lamination.
Mottling- unequal colour distribution of a tablet.
Capping- Partial or complete separation of a tablet top or bottom crowns.
Lamination- Separation of tablets into two or more layers.
8) What is the difference between picking and sticking?
Ans) Picking- Because of adhesion to the punch faces, Localized portion missing on the surface of the tablet.
Sticking- Adhesion of tablet localized portion to the punch faces resulting in rough and dull appearance.
9) Define capsule and how many types of capsules are available?
Ans) It is a solid dosage form. It contains API and excipients enclosed in a water soluble shell made up of gelatin. Two types of capsules are available. Hard gelatin and soft Gelatin capsules.
10) Explain about hard gelatin capsules?
Ans) It contains two parts called body and cap. Body, a long narrow section. Cap, a smaller wide portion, it fixes over the body.
11) What is the biggest and smallest capsule size?
Ans) The biggest capsule size -000 & smallest capsule size - 5.
12) Define parenterals?
Ans) Sterile dosage forms administered by injections thorough one more layers of the skin.
13) Explain about Water For Injection (WFI)?
Ans) Purified water without any pyrogen, prepared by distillation or reverse osmosis.
14) What is pyrogen?
Ans) They are the metabolic products of microorganisms produced from living or dead microorganisms.
15) Difference between water for injection (WFI) and sterile water for injection (SWFI)?
Ans) WFI - Purified water without any pyrogen
SWFI - Purified and sterile water without any pyrogen
16) Difference between ampule and vial?
Ans) Ampule is simple dose unit and Vial is multiple dose units.
Key words - #pharma production interview questions and answers production interview
Пікірлер: 46
Mam ya to solid walo ka liya ho gai jo parantral walo ka liya bhi bana do
good collection of information #pharmaceuticalconcept
It's very helpful video sir thankuu so much Sameer sir
Good
@viceprincipalmcp5146
3 жыл бұрын
thanks
Nice vedeo... Thanq sir
@viceprincipalmcp5146
3 жыл бұрын
thanks
Very helpful video sir so thanks
@viceprincipalmcp5146
3 жыл бұрын
thanks
Thanku sir 🙏🙏🙏
Bro please upload 7years experience production core interview questions and answers and also qms questions and answers production
Thanks sir
@viceprincipalmcp5146
3 жыл бұрын
thanks
Parantral plant ka interview kuch alag he hota ha mam
Nice Video Sir
@viceprincipalmcp5146
3 жыл бұрын
thanks
Har Department ke alag interview share karo packing department releted documentation
Thankyou sir ji
@viceprincipalmcp5146
3 жыл бұрын
thanks
Thanq sir🙏🙏
@viceprincipalmcp5146
3 жыл бұрын
thanks
Thnq sir
@viceprincipalmcp5146
3 жыл бұрын
thanks
Bsc fresher keliye production interview questions share Kare pls..🙏🙏
Sir may I know the difference between API and adverse event???
Nice
@viceprincipalmcp5146
3 жыл бұрын
thanks
what is third question answer.... i didnt understand . is it right answer
Intervew questions answers download link upload please some knowledge or understanding process
Bro is it useful for fresher's
Good videos lecture sir ❤️
@sameerrastogi9563
3 жыл бұрын
Thanks
These question are not for freshers
Kuch barabar se nahi dikh raha
Bro please make video on fresher's interview in production department
@sachinpoojary5926
2 жыл бұрын
Hi bro!! Are you working in pharma production department?
@romeo5788
2 жыл бұрын
@@sachinpoojary5926 yes bro
@sachinpoojary5926
2 жыл бұрын
@@romeo5788 bro please send your contact number... I attended interview on Monday..
@sachinpoojary5926
2 жыл бұрын
@@romeo5788 please bro i also attend production department interview in pharmacy...
@romeo5788
2 жыл бұрын
@@sachinpoojary5926 which company bro
Thank you sir
@viceprincipalmcp5146
3 жыл бұрын
thanks