Thanks for this video which really explain how to use the SMS arm function !!!!

I went crazy trying to have the GSM function working.The message was "searching network, please try later". Actually, it was that my sim card had a pin code set, and the PG103 cannot gess which one. So you must first desactivate the pin code on an ordinary phone before using it in the PG103. After that it works fine.

@rafaelgordosanz9915

Жыл бұрын

How can you do that??

@CJ_BOWMAN

8 ай бұрын

How to set up the sim card with the device.i don’t know how to see the apn settings for the device to set it up

Thanks for this video

Best tutorial !!!

How it works for the others numbers you set in it? It just calls the first number you have register, what about the others 4?

Hey ! How to set à passowrd on the Pg-103 ?

Can i add another brand outdoor siren WiFi?

Is there option to connect wired sensors?

Does it work with home wifi or its own

我剛買一個PG 103,但有点問題在新加配件有問題

How to turnoff when i pess armed or disarmed speaking vioce ? So noisy😂

How to setup the Wifi function only for check notifications when i have the mobile 3 hundred km away home in a enviroinment without gsm network? Looks like its a Gsm/bluetooth alarm, not a wifi alarm

Hola, una pregunta, si entra alguien en la vivienda y suena la alarma, puede quitarla sin necesidad de llave, como puedo ponerle contraseña? Gracias.

Hello, its possible to disable SMS "read receipt" ?

Hi, I just got this alarm system. I have some questions: 1. The Host needs constant power supply, correct? Which of the other devices as well? 2. The SIM card is needed if you want push messages from the host, yes? So in order to use it properly, I have to buy a SIM card. Which one? 3. Where can I get more window/door pieces and cameras?

@melorogerio

7 ай бұрын

1. No, it's battery lasts 5 hours 2. No, you can use app and WiFi to control and receive notifications

Hello this is a very good explaining video, I would like to ask, I have this alarm working with another app, but I want to change to this smartlife app, is it possible? because I try do add to smartlife app but no success...

@user-zn3cq9bu3v

7 ай бұрын

Wich app? Is it possible to connect this alarm to a wifi network from a normal wifi router because I want the alarm connected to the wifi network of home and no have no luck, it only connect to the app of the phone not to the router

@markusholmgren2166

4 ай бұрын

What app do you use before smartlife?

If anybody pushes the Disarm will it go disarmed? I mean if the robber find the host and press the disarm will it go off? Or how it is done?

@therianfox.

4 ай бұрын

After click on disarm U put the pin or the password..

very nice video

@samuelnogueira8237

Жыл бұрын

When installing the smart live app requires password. What password and connection?

@Vlad-Lend

21 күн бұрын

@@samuelnogueira8237 User Name: admin

how much the system consume data for 7 doors, 5 motion sensors plus the remote and rfid tags...anyone ?

Hi, what do i do if i have a cat and a window is open? And the cat goes outside? It their some setting for that?

I have this alarm but it dosent work, can i controll the alarm in app if i only have simcard? The name of the app to controll?

Hi may I know how to unlock the key board if you forgot the password?

SÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅÅ COOOOOOOOOOOOOOOOOOOOOOOOOOL

SÅ cool

does it have to have a sim card if you want to receive a notification when the alarm goes off?

@pgsttechnologiesinc3505

Жыл бұрын

Apps can also be pushed

@progagming2410

Жыл бұрын

我剛買一個PG 103,但有点問題在新加配件有問題

cant add the wifi, there is no airlink. how do i remove the current AP? tuya ang smartlife is not really helpfull. :(

Airlink configure: configuration failure. What I do? I cant pairing my pg103 with my smart life app...reset and unbind wifi doesnt worked...

@carlos220506

Жыл бұрын

Any solution??

@oconcurseiro6887

Жыл бұрын

@@carlos220506 nothing.... I bought a new switchboard to use the sensors from the old switchboard. Waiting for someone from the company to give an answer, but it's difficult.

how do i reset pg103 in factory mode? My device is alarming on its own every day at 12:20 pm. I can't resolve. need help

4:43

when I add more than one door sensor the panel display there are open zones, and all sensors are close, help me please

How do i do if I forgot the password? To enter to menu? Thanks.

@PepicatVR

4 ай бұрын

Did you find answer? Same problem...

I have put A simcart in the Host, (no wifi available)and than follow your steps, i have put the phone number from the cellphone that must reseved the sms...but not reseved a message...what do it wrong?

@CJ_BOWMAN

8 ай бұрын

Bro I have the same problem. I been trying to see how to set up the apn for the device still nothing

@tanskiee

2 ай бұрын

Have u figured it out already?

How can you lock the keyboard? Currently, any burgler enter the house can disarm the alarm by pressing the disarm key.

@doschlumm

Жыл бұрын

Goto Setting - - >Switch--> keypad lock. Change to on. Setting--> Password. Set user Password.

@jonathanoliver8600

Жыл бұрын

Having same issue and tried the above, do you need to reset panel or something after doing this?

@doschlumm

Жыл бұрын

@@jonathanoliver8600 No need to reset. it gets the pwd immediately.

@miqueiasmelo1492

11 ай бұрын

@@jonathanoliver8600 It takes a few seconds to lock, you will see a key symbol on the panel when its locked

SALUT pourquoi ne pas avoir autorisé la traduction sur youtube vraiment négatif

How the hell is this a good alarm system when the intruder can clearly just disarm it without punching in a code this is a hazard of your stuff being stolen

@BadSaintroblox

3 ай бұрын

You can add a code

@adrianpacioga5910

2 ай бұрын

cutting power is not a option, as it has a battery life in case of... obviously is for repelle any attempt. do like that has gaz and smoke alarm notifications and a sos button...dose help old people to feel safe when they try to do something physical without supervision

@ReechCasterTroy

Ай бұрын

You can put a door sensor so the intruder will freak like a police taking the crime

is it possible to have only the sensors on the door activated without the pir motion sensors being activated? so that when I sleep at home I only have the sensors on the doors activated. if so, how is it done?

@melorogerio

7 ай бұрын

It has "home mode" it activates only door sensors

Hi

10311

todo bien, pero...........si el ladron entra...........puede apagar la alarma desde el panel sin pedir contraseña¡¡¡¡¡ fallo garrafal

H mit w b feq😂

מאור

what is the default password of the host?

@nuwansujeewa4482

Жыл бұрын

6666

Gvhhh

Hello, I’ve purchased 2 system and I’d like to bind together the 2 main panels….. please help me with this, would be great to be able to operate the system from 2 entrance doors in the house. Is this possible at all? Thanks