What a bad place for that sensor sticking down like that, you must change these weekly!!!! Nice video Justin

Might look into posi lock wire contact things they were big years ago , can be used over and over .

Yep! Fuel mapping cause my truck was getting crappy fuel mileage as well.

Great video JST

Thanks excellent video I fix my truck easily

Cool video man

Justin...You're the real deal...you make me laugh out loud. The things you say when your're trying to repair. Keeping it Real. :-)

Thank u Soo Much I'm working right now and you save me am learning.... 😅

Hey Justin, quick question. Whats is the computer model do you use to work on your trucks?

Hey Fker... Awesome Video! I have a 2024 Peterbuilt. Still new truck smell. Question where do the wires go from the Ambient Air Temperature sensor to... Where? This crazy Fker is reading from -40° to 100° and is going up and down constantly. When it goes to -40° the AC doesn't work only heat. Or it just shows --- and then it all works. It's a pain in the ass. Any advice would be grateful.

Good repair

Just had to fix mine wiring in door harness in jam was worn. Question after cutting and patching does the sensor need to be reset or calibrated cause I noticed mine reads about 10 degrees higher then normal

Yep! I noticed that there was no reading of the outside temperature and without the truck detecting the outside temperature from my understanding that it causes the truck to not run correctly and burn the fuel properly cause it detects the outside temperature and adjusts to it. That's from what the mechanic had said to me. Had the same problem with my truck.

@rmorgan0876

3 жыл бұрын

Did it work once you replaced the sensor

@waynenorbreyjr9371

3 жыл бұрын

@@rmorgan0876 Yes, once that was replaced and the truck was put back on the computer it was running properly.

@dougstringer1097

Жыл бұрын

Did you have to calerbrate the new sensor? Or was it plug and play?

@waynenorbreyjr9371

Жыл бұрын

@@dougstringer1097 If I’m not mistaken our mechanic did reconnect the laptop the truck after the sensor was replaced. I can find out for you.

2019 Peterbilt and you're replacing sensors I believe I would be contacting the Peterbilt dealer to be reimbursed for the cost of the parts

@AK-cx5ix

3 жыл бұрын

Warranty doesn't cover.it 🤦‍♂️👨‍🔧

Hey bun at the end of your video you said because of the heat sensor it was getting 3 mpg can you give me a bit more info on that … I can’t find the sensor no where and don’t want them type of fuel numbers thanks in advance bud love your video

I have 2015 t680 same set up I changed the sensor it’s still not reading the temp and still have same check engine light any suggestions what to do next?

The door harness will also take a shit and cause that problem as the wires going to the temp sensors are tiny and love to break.

I have similar problem but the dash reads the right temperature but it says the air intake and road surface temp is 32° when it's 80°. Is there another sensor for air and road surface temp?

Kw had a recall on those

need that Milwaukee heat gun, and a smaller pair of crimpers lol

What does a pound symbol next to the outside temp mean??

Use a bic lighter after you light your smoke to heat the wiresfor a couple of seconds and pull the wire cover right off. Faster and easier than a wire stripper. Besides you have to heat the shrink on the butt connectors

Súper

Do you know if there’s a sun load sensor on the new peterbilts with automatic headlights? No warnings, auto headlights just not working. Thanks!

@ChrisDavis333

Жыл бұрын

I know that on cars there’s usually some kind of sensor(similar to what you’re replacing in this video) that reads whether or not it’s daylight outside and it controls the automatic headlights. If you have any suggestions I’d appreciate it.

Can this sensor keep the engine fan running ?

There was a campaign for those

Any idea on the location of the temp sensor on a 2010 W900 (moto mirror)? Is it in the mirror because I don't see the little plug thing like you have? Any ideas of any other location before I tear open the moto mirror assembly?

@JUSTINSTURGILLTRUCKING

4 жыл бұрын

HustlenDreams Drivers side it is zip tied to the mirror bracket and you have to buy a new mirror with all the wiring harness and everything if your temperature sensor is messed up and throwing a code and that’ll be 300 and some odd dollars

@SPSGTX1

4 жыл бұрын

@@JUSTINSTURGILLTRUCKING Yes, the wire is zip tied to the mirror bracket. I was hoping it was a quick fix like the one you were working on. I guess I will have look into that. Thanks for the reply sir

@JUSTINSTURGILLTRUCKING

4 жыл бұрын

HustlenDreams Not with the Moto mirrors it’s a pain in the ass and fucking expensive

Warranty?

You ever seen where after instal of new sensor it reads -14 when it’s actually 85?

is that an old tuff book?

What program are you using to pull up codes

@robertearls9010

5 жыл бұрын

Nacho Chavez at the company I work for it’s Cummins insite but pretty sure they have it for all motor brands

Why not add a 2 wire male and female pigtail connector inside the mirror housing?

@huejass8932

5 жыл бұрын

That would be ideal if you expect the drivers to keep playing bumper trucks but this is about as good as it gets for permanent.

@budgetmx5055

5 жыл бұрын

@@huejass8932 not necessarily playing bumper trucks...but washing the truck with a brush could break that sensor...ultimately it's a shitty location for the sensor

@huejass8932

5 жыл бұрын

@@budgetmx5055 I never expected it to be so cheese grade.

@budgetmx5055

5 жыл бұрын

@@huejass8932 I know right? But that china made junk for you

We use that same system at work

Lmfao @312 degrees

Your look opener looks like a thread cutter for sowing

First

🔧⚒💪🥇🇺🇸

$115 for that junk god damn...

Shouldn't that be under warranty?

@lukejacob3340

5 жыл бұрын

No because it was hit by something the part didn't malfunction

@OffroadCpl

5 жыл бұрын

I see shady ass drivers...lol

How much the heat gun run you? $1,000 😂 also what do the trucks use to hook up to the computer? Same OB2 port cars use?

So glad to see the intro back.....how the FUCK are you?

2019 567 AC Problems anyone? I ve had problems since day one. Thanks

@dumpsterdiary

2 жыл бұрын

Are you out of Freon? I've had to replace evap cores on every one I own...They leak the freon where the evap core meets with the thermal expansion valve. Check my page, I have a video on replacing them...pretty simple and can be done under a couple hours (assuming that's your problem). If you aren't sure if you are low on freon, watch my vid and you can look where the 2 parts connect, it will look like something had leaked and a bunch of dust/dirt will be stuck on that area.

Heard of a guy that routed that sensor into the cab and put it in his cooler to get truck to run "better" truck got confused as hell lol

I called peterbilt for my 357 and they told me i needed to buy the entire mirror assembly with the harness and THEN i could get a new sensor with it….. so i called napa and ordered a generic ass ambient air temp sensor and wired it in G2G

numbers instead of dashes

*It is 300+ DEGREES are you sure you ain't cooked like HOT DOGS!!!*

Imagine....Paint marks, and broken sensor!! Drivers these days don't know shit about driving!

What a crappy location for a sensor

I had my 10 year old boy helping me and 3rd word was the f word,you don't need to speak like that to be a man