Next video tuning 🙏

Fantastic video. I remember asking you in Costa Rica if you made your own builds. They looked so clean, i assumed you had a pro builder making them for you. But, no, you are just a talented builder. Great job!

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

@jeffames2880

2 жыл бұрын

@@jagdeep5254 You are going to spend over $1000 US dollars to get a setup like this but then once you have goggles and radio your expenses will be reduced to MANY MANY broken parts.

I normally don’t watch everybody’s build videos but when I saw the king of racing do one I had to check it out! Clean build!

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

@jonyvilla23

2 жыл бұрын

@@jagdeep5254 put the links of everything bro

Awesome build video. I'm not sure why but I was almost expecting you to say I'm MinChan and you're gonna learn something today. Thanks for posting this. Many of us got into the hobby because building is almost as satisfying as flying it.

You're the best in the industry MiCK !! DON'T LET IT GET TO YOUR HEAD THOUGH !! There's ALWAYS IMPROVEMENTS

Thank's for sharing. Please make a video show builds for your newers drones. Your builds for racing and that very fast that you publish in the shorts.

I've been waiting for this video for months now!!! Love you MCK. Your a legend

You are the man! Thanks for sharing. Means a lot for the GOAT to share! Really looking forward to your next video about tuning. On racing, I'd love to learn more about your practice routines. Also want to learn how to tackle dive gates from different directions and exit points. Thanks!!

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

Soldering the ufl is a cool trick, and only 2 motor screws. Interesting to see which screws he substitutes for aluminum as well, where to sacrifice durability for weight. I trust his decisions, probably gonna try it out on my quads

This kind of content will make your channel absolutely explode! Keep it up MCK!

Finest hands in the hobbysport. Thanks for the peek, MCK!

Iam so glad you made this video 👍👍👍. I searched for something like this few days ago, but everything was tutorials how to build beginner FPV drone, not pro racing drone 😁👍.

you should do more of these Build Videos MiCK !! A lot of people want to see you BUILD quadzz

i really felt the soldering fumes in my face

Thanks for this finally someone honest and not just trying to push the same products these other pilots are pushing much respect!

Making me want to get into racing soooo bad!! Thank you for this video, bro. 🔥

MCK is a drone racing super computer🖤💗

Loved seeing you way of doing things, thank you

Great video, MCK! Can't wait for all of the follow up videos :)

Finally a build video.. Following you for almost 3 years :)

Thank you so much for making this video. I can't wait to see your tuning video. I am a huge fan from Puerto Rico, I hope I can meet you one day.

Great video, thanks for making and uploading!

I was not intending to watch the whole video but it was so well made that i actually did 😄 Great job mate 👍🏻

Great job! Nice to watch your work!

Wow change of format! Thank you so much for sharing this to everyone, specially noobs like me! :)

Thank you for taking the time to do this! I would your your method in my next build.

so satisfying and clean

Awesome Build video, what a clean job. Love it. Good Job 👍👊

Mck is my favorite pilot 💯🙌

The Gemfan MCK 51466 V2 props are fantastic! I tried them recently and think they are my new go to prop.

Excellent video. Thank you.

You're my hero! Please make a line of sight video. I saw you flying los in somebody else's video, and it's absolutely amazing!

Great content dude. Loved it. 🤌🏻🔥

Nice clean build.

really good job man, very cool

That’s looks like unicorn! Great build video! 😎

Great build tutorial brother 👊🏻🤘🏻

MCK ASMR is the best

LEGEND!

Nice! Thank you for this, very useful.

The tuning video will be really cool. I want to see how pro racer tunes his quad.

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

great video i really liked it!!

Awesome man , we love this kind of content from you. Getting to see a more personal side of THE MAN the Mystery , THE MCK! Amazing pilot. Great video!

Thanks for sharing very cool

LFG! Just put together a lite a week back :) nice build mck

Clean and fast af boiii😎🙌🙌😎

Great video!! Love watching the pros build. Freestyle build next?? Lol

I had no idea you could add solder to the vtx u.Fl antenna to keep it from coming off. That's incredibly smart.

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

@ThreeSC

2 жыл бұрын

@@jagdeep5254 about $500

sick build video i hope you will recored more

you gotta send bardwell some of that purple tape he's destroying his quads with inefficient orange tape

It is rocket built by legend ❤❤

mck is da king

Please do more video like this!!!!

Ok, this was super amazing to watch. Just how many of those quads did you already build? That solder-place and your practised hands while soldering tell me... it's a lot :) So glad I finally got to see somebody building that 533 type race quad. Gonna have to build my own now >.

I would hotglue the UFL connector instead of soldering it and add some hotglue to the soldered wires. But i am not a PRO Racer

Great video. Just a recomendation, you should get a fan with some filter to suck the fumes comming out of soder when soldering as most solder is toxic if it comes into your lungs.

우와 멋짐 멋짐 !! 👍 👍 👍

Cool Video dude. Great for noobies and loads of useful tips for experienced builders too - like soldering the VTX u.fl antenna. More like this please.

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

@phlyxar

2 жыл бұрын

What is the reason for soldering the antenna?

super cool!!!!!!!!!!!!!!!!!!!!!!!!!

U r awesome man

Fast clean soldering. Good technique. Tin, tin bang. Super fast, super clean build. What aren't you good at?

Love this video. Maybe another one line this but you explain your BF settings

very nice! would love to see your take on a sub 250 build :)

Waw your english is so good!!

awesome video yea do a vide when you tune quad

Five33 should carry this entire build as a DIY MCK Racequad Build and at like a 10% off discount. These xnova motors are not in stock anywhere in usa currently so i went with MCK's V3 2100kv motors for the one im building . Also Five33 should try to get some Dogcom 6s 1160mah lipos back in stock like this year .

MCK is my favorite Harry Potter

Nice video! I have a couple of questions if you have time to answer; 1. What is the weight of this build? 2. Are 2 motor screws enough or is it better to use all four? 3. I see you don’t use any loctite. Any particular reason? BTW I really admire you as a pilot. Not just race quad but helicopters also. I also started as a heli pilot and later moved to quads. I was completely blown away when I saw you flying 3D heli. Just WOW! A lot of talent and A LOT of hard work and practice. Keep on man, you are the best. True inspiration! 👏💪🔥

@ 20:54 you solder the UFL to the board......I never knew that was possible! Great way to secure the connection! Awesome trick! @ 22:08 it looks like VHB tape - not double sided tape but maybe I'm wrong..... @ 22:26 Bro - you should tell the masses that they will short their board out if they don't correctly insulate it before sticking it to the frame.....just saying 😁 Awesome build bro! Loving the purple tape 😎

@jagdeep5254

2 жыл бұрын

How much this all together cost excluding goggles and controler

More build vids please

Started from the bottom now we jeeee

Hell yesssss

Very informative and cool build video. Thanks for sharing. Would appreciate seeing a tune video. 👍🎶🤓

Yes!!!!!

Why don't you use aluminum screws for the top plate?

What Battery strap do you use for the switchback? And can you make a video on your velocidrone settings and how you practice in it.

We want’s more vidéo like this, great job, what is your rates ?

Could you do a video of you flying that Align Quad behind you?

Noice! I think the four longer screws are supposed to go through the arms, though 😉

@Noical

2 жыл бұрын

No, they are meant for standoffs

Hi MCK, what caps are you using? The one mounted on the XT60. And yeah, pointless to say but huge respect for all what you are doing. Best and fastest pilot by far in my books. I think others will agree :)👏🚀🔥

how do you wire up the warp drive?

will you start flying fatshark hd or do you like to fly analog this year?

Hi Min Chan, aside from the order able parts, where would I go about getting the 3D printed parts for the camera and antenna units? Thank you

lets see the perfect HDZero build :)

Can you please show us how you tune your esc for Freedom spec and for 6S. I will appreciate if you can make a Beta flight diff for us.

Hey MCK! Could you please tell me where I can find the STL for the turtle fin you're using? It looks like the TPU Stick from the Switchback Classic but I'm not sure.

I see one clear difference between his he and I building quads. He doesn't care about how to use a part after this quad. He cuts the wires right in size, soldering ufl antenna and so on. Because he has tons of new parts. He doesn't try to save a part for a future usage, but he saves alot of time. And it's cool when you can do like this. 🎉 But why he didn't cut off the camera control wires same plug - I have no idea 🧐

How many quads du you take to your tournaments?

Thanks MCK, great video. Your XT60 capacitor wires are exposed and could short on the chassis in a crash or when changing battery.

What is the last 3d printed part that he mounted? Kind of like a horn.

Watched to the end to see the weight but no luck. What does one of these weigh with props (51466 I presume) and battery strap?

How much does it weight like this without props and battery`?

Are these new 2050kv motors better than your v3 2100kv motors?

the ESC you linked is a newer SKU capable of 128khz operation. Is that important? Do you use it? or is the older 98khz versions fine?

I half expected this video to be the world record fastest 533 build... Maybe next time?

Tuning please 🥺

What is the spike on the top for?

Weight it man and front left motor bearings sounds rough .

is this the velocidrone five 33 switch back build?

Tataurial how to built ur finger speed sir plss hehe