Shopping for clamps: UK Amazon - Uniklamp 80cm - amzn.to/3DcsZtP - Uniklamp 60cm - amzn.to/3ktir2Y - Uniklamp 30cm - amzn.to/3ZZq29F USA Amazon - Uniklamp 6 inch - amzn.to/3HBAuxj - Uniklamp 12 inch - amzn.to/3GVHO5a - Uniklamp 24 inch - amzn.to/3woucKH

Thanks Tomas, great idea

@CasualDIY

Жыл бұрын

Thank you for watching 👍

The simplest of ideas can sometimes be the best ... as for showing stuff others have done, you gave credit where credit is due, you have also spread this particular idea to an even bigger audience ... brilliant in all respects 👍

@CasualDIY

Жыл бұрын

Thank you kindly

Clever! You could even drill some oversize holes in the top edge of the pipe, so a woodscrew could pass right through. Then you could screw through the plastic into the timber for a stronger fixing 😀

@CasualDIY

Жыл бұрын

Can go either way. This seems a bit quicker and it's very strong and stable 👍

Great idea Tomasz!

Great idea. Thanks for sharing. In the past I've been subscribed to JB's channel, but I think it's been more than two years now since I've last time watched one of his videos. I should go back there.

@CasualDIY

Жыл бұрын

He is not posting as much as he did. I know he had some health issues and had to scale down a bit. But he was the very first KZreadr that inspired me to start woodworking and having a KZread channel. He is a great guy.

As per usual.! Great video.!!! Just love the fact that your videos are so direct and to the point.

@CasualDIY

Жыл бұрын

I appreciate that!

Wow. So simple I’m (almost) speechless! Great video. Regards JP

@CasualDIY

Жыл бұрын

Great simple jig for glue ups 👍

Brilliant quick and easy to clean afterwards. Nice one Tomasz. Tony

@CasualDIY

Жыл бұрын

Thank you kindly. They are worth making for sure

Brilliant idea, thanks for sharing Tomasz 👍

@CasualDIY

Жыл бұрын

My pleasure!

Good idea Tomasz, thumbs up for stating you saw it elsewhere. I got a tip a while ago Re, glue ups and that was to alternate the clamps (one above, one below) this was to prevent potential warping.

@CasualDIY

Жыл бұрын

Yes on larger glue ups it's definitely worth doing that 👍

Great idea. Going to make a set for my upcoming projects.

@CasualDIY

Жыл бұрын

Well worth making 👍

Ohhh... I almost forgot about this idea! 😯 Thanks, Tomasz! I'm definitely going to make some for my shop as well!!! 😃 Stay safe there with your family! 🖖😊 BTW, Jay's a great guy!

@CasualDIY

Жыл бұрын

Well worth making mate 👍 All the best.

quick, handy and easy to put together = me in the workshop this afternoon banging some together (I'm sure ive got a few bits of pvc pipe up in the rafters……)

@CasualDIY

Жыл бұрын

Exactly and they work great 👍

That's brilliant, not seen it before, so thanks for showing us 👍

@CasualDIY

Жыл бұрын

No problem 👍

Something so simple yet is a must for glue ups 👍👍

@CasualDIY

Жыл бұрын

totally agree 👍

An excellent video as always. Great hints and tips as always.

@CasualDIY

Жыл бұрын

Glad you like them!

_Brilliant idea..._

@CasualDIY

Жыл бұрын

And it works great 👍

Tomasz i noticed that blade guard on your saw looks amazing has it been on your videos,?

@CasualDIY

7 ай бұрын

Yes, here is the link - kzread.info/dash/bejne/loKZtKSSqKrcntY.html

Great idea and video as always. One thing that caught my eye is that you don’t seem to using an evolution blade in your mitre saw, could you tell us what it is please

@CasualDIY

Жыл бұрын

I got the Freud blade installed

@bldcompsol

Жыл бұрын

@@CasualDIY thank you

Tomasz, have you fitted a ‘soft start’ module to your mitre saw as well?

@CasualDIY

Жыл бұрын

No, mine seems to either have one in it or it just starts very slow 🤣

I'd not seen this concept before. At first I thought it was going to be some sort if Caul system (to keep the boards from sliding up or down when clamping).

@CasualDIY

Жыл бұрын

I seen a long time ago on Jay's channel and finally decided to make some

With all due respect, but if you have these clamps that have already/form a flat surface why should you use additional hardware? If somebody doesn't have descent board clamps and needs to make flat board than the idea might come as handy one. It is my opinion, of course.

@CasualDIY

Жыл бұрын

What I find with them is that quite often I waste time on aligning the boards on them. As I move one clamp or try to push the jaws onto the wood then the boards move and go out of alignment etc. Thus way I just got better access for the bottom so adding extra clamps from the bottom is also not a problem.with these platforms. That's just my findings and experience. For me this way (with these platforms) seems much better, quicker and easier. But each to their own I guess.

@rossen_nikov

Жыл бұрын

@@CasualDIY Just want to add that if I have to make a longer board, I consider extra clamps from the beginning so no need of adding clams from the bottom. I agree that small movement of any clamp causes (could cause) realignment, but I think, in this particular case, if you do not fix the wood strips to the tubes, you will experience the same problem once you touch the strips with the clams. Anyway, if somebody finds this useful it is a good reason to be pointed out. Respect!

I have a set of these I made years ago, and they work fine for panels and cutting boards, but what I use most of the time these days is this clamping platform for the woodworking companions channel; kzread.info/dash/bejne/Y6met6huo86pqqw.html I made is lat year and I love it. A bit more of a storage issue than the jay bates model but has some very significant advantages.

@CasualDIY

Жыл бұрын

Hmm seems like an interesting idea