Nice video…thank you! I found one of these reels on a rod at a yard sale for $20. Now I’m inspired to disassemble and get it all cleaned up.

@2ndChanceTackle

2 жыл бұрын

Best wishes on the service. That is a good price for the combo. Enjoy - Dennis

Thanx for the video journey I did the floating processor ships in the early 90' s ,, Alaska coastlines, On the down time of processing herring, salmon, and crab, I was always standing by the rod and reel I got in sitka, And it turned me into a gear admirer,, Now I have accurats, tiburon s Van stalls, And I still collect what I used over 20 years ago 114' s 113's When they have been hot rodded With tiburon Xtra wide frames, Custom handles, so as not need to duct tape the palm of hand from hot spots, I let some one borrow my stock 113 special senitor, 279 yards of 80 lb mono,,, An 8 oz sinker, and salmon tail bait takes 5 minutes to hit bottom with 1 wrap of line on the spool . And he pulled up a 425 lb halibut,, He kept it We used the big ship crane to get it to top deck for processing ,,,

@2ndChanceTackle

Жыл бұрын

Wow - now that is a fish story! Thanks for sharing - Dennis

My favorite reel!

@2ndChanceTackle

2 жыл бұрын

One of the best

one beautiful reel!

@2ndChanceTackle

2 жыл бұрын

It sure is! And built like the proverbial tank

Thank you for your knowledge

@2ndChanceTackle

Жыл бұрын

YW - I appreciate the note and viewership - Best wishes - Dennis

Have 5 of these113H's in my shop and was wondering how I could get them back in the game. Now I can try and referb them. Thank You SO MUCH!!!!!!

@2ndChanceTackle

2 жыл бұрын

You are welcome - just take your time and you will do fine - If you need part, like replacement drag washers or springs, you should be able to find them at Mysticparts.com - Dennis

Nice videos, I am glad I found your channel. Keep them coming. I have only serviced Daiwa Sealine SHAs, Penn Senators, and a few spinning reels and I really enjoy seeing the differences in the models you work on.

@2ndChanceTackle

2 жыл бұрын

Thanks, will do! Thanks for the note and for watching - Dennis

Great time to release this video, allot of anglers are getting Cabin fever here on the east coast. Great way to kill some time before spring commission.

@2ndChanceTackle

2 жыл бұрын

Thanks - Wishing all those with cabin fever a speedy recovery and great fishing!

Hey! An anniversary edition 113H!

@2ndChanceTackle

2 жыл бұрын

So many flavors to choose from! I never know what is going to show up in the shop! Thanks - Dennis

Your videos are really helpful and i was almost able to fix my Penn 113H Special 4/0 Senator, its a graphite frame, wide spool 113HLW. My problem is the spool gears remain attached to the spool and every instruction video i can find has the spool gears coming off freely from the spool when the reel in taken apart . I took my reel apart and replaced the eccentric thanks to your video, but I cant get it back together since the gears remain attached to the spool. Any suggestions? Do you have any idea what i am trying to explain? thanks

@2ndChanceTackle

2 күн бұрын

Yes. I did a video on the problem. You can watch it here kzread.info/dash/bejne/hJ2lvMGekd3fobA.html. Essentially, the pinion gear has rusted on to the spool shaft. You will need penetrating oil and perhaps heat to free it up. Watch the video and see if that helps - Thanks - Dennis

Great video. Working on my own 113h 4.0 but my clicker button is loose. The clicker arrow turns a bit with the reel spool. Can it be re-staked, or is this a replacement problem?

@2ndChanceTackle

Жыл бұрын

Sounds like a weak click spring. I am not sure if you can replace the one on your model. If you can't, you can usually gently repent the tabs inward to restore tension and tighten up on the click tongue - Thanks for asking - Dennis

what thickness are the non metal washers in the drag please and can I buy them ready cut or buy a sheet to cut them from. thanks Rose

@2ndChanceTackle

Жыл бұрын

I'm not sure on the thickness, but you can still buy these and they are available through Mysticparts.com. The link below takes you to the item. www.mysticparts.com/PennParts/Parts/6-113H.aspx. Dennis

how do i get line on the spool evenly? modern reels have a line guide but these older ones don’t so i have no clue what to do

@2ndChanceTackle

Жыл бұрын

You need to guide the line back and forth with your thumb or index finger when you are retrieving the line. Your finger would mimic the action of the line guide - Dennis

I got pin out of bridge sleeve but I cannot get sleeve off. I've tried everything just won't budge

@2ndChanceTackle

Жыл бұрын

Give it a good spray of penetrating oil in the hole and let it sit for a while then try clamping the bridge top end in a vice before slipping a small screwdriver behind the sleeve and bridge to pry it up. Note, if you are turning the gear sleeve and the post pivot on the back of the bridge is also turning, then the sleeve is rusted on and you will not be able to remove it. Dennis