You have saved the day, I was wondering if there was a video how to do this step by step and WA-LA here it is. Thank you for speaking each part out loud and explaining. GREAT VIDEO!😅

@BradHemedes

Жыл бұрын

🙏

Hi Penn Fathom reel repairer thanks for the info just ordered one for me and a friend who owns a tackle shop in Wellington New Zealand and another who services washing machines what a great tool. Those clips have a brain and go in any direction as well

@BradHemedes

2 жыл бұрын

You’re welcome!

Nice information master keep it up now I know how to maintain my reels. Keep safe always master watching from Germany

@BradHemedes

2 жыл бұрын

Salamat master.

Gravy ang ganda naman nyan sir pang malakasan talaga

Wow! Ganda talaga ng penn boss i dol. Nag babaka sakaling may pinag lumaan ka boss i dol. Sira na kc yong reel na ginagamit ko.maraming salamat poh godbless.

@lecnhojnaval4502

3 жыл бұрын

Nag bakasakali lang poh. Ako boss i dol na kung may pinag lumaan ka poh.

Iyon pare dito na buti Naman gumawa kana Ng Channel Power ka talaga Kay idol Richard Molina support ako sayo habang akoy mabuhay kagaya Ng pag support ko idol Richard Molina

@BradHemedes

3 жыл бұрын

Salamat master!

Good job perfect

Ohhhwow halos similar sila Ng Watch gear may ratchet Ang watch pag gumawa ako

Sarap sa trolling yan kabayan

Ito yung maganda pang trolling pangmalakasan po .hehehe.

nice video, after I greases and oiled my reel I hear a grinding noise when I use the reel to test the drag. Did I put too much grease or not enough you think? the grinding comes from the clocker side on the left

@BradHemedes

Жыл бұрын

Did you remove the left aide plate and oil the bearing?

Hi Your work on this reel is very good. I am about to buy a Penn Fathom 25L2D and I was very interested in your disassembly. What I would very like to know is what is the make of the c clip tool. In the video I can see the part number 350 14 but could not pick up the maker. At a guess it looks like a Snap On tool is that correct?

@BradHemedes

2 жыл бұрын

This is what I found in Amazon. Dynamite Ultimate E-Clip Tool 1.5MM-5MM, DYNT1107 www.amazon.com/dp/B07XG91TS9/ref=cm_sw_r_cp_api_glt_fabc_ZHEQPNYNWPHHZN9DMHHD

I believe a spring popped out of my drag. Any tips on getting this back into place? Also, you are masterful at this sort of work!

@BradHemedes

Жыл бұрын

Can you give me the part number so I have an idea which part are referring to.

@ericbryan828

Жыл бұрын

@@BradHemedes sorry, I believe it is #14 on the reel schematic.

@BradHemedes

Жыл бұрын

You need a pick or pointed tweezers. Line up the lever on the rachet (2A). Pressed down the pin and spring push forward the lever. Hope that helps

I watched your video with interest & I would like to start servicing some of my own reels to save money. Can you recommend the basic tools & products that you use. What degreaser is that & where can I find it? Thanks!

@BradHemedes

3 жыл бұрын

Thank you for your interest. I use either a Penn or Abu Garcia degreaser I bought from Amazon.

@BradHemedes

3 жыл бұрын

You can get the Abu Garcia reel maintenance kit plus long nose pliers, tweezers and C-clip remover.

@robertarnold6672

3 жыл бұрын

@@BradHemedes Thanks! I will be sure to order one. Also I just bought a Penn Fathom 40 2 speed reel so thanks to this video, I will be able to service it myself. I enjoy your channel & recently subscribed.

@BradHemedes

3 жыл бұрын

Thank you for your appreciation!

Hello sr, what You use to clean it outside after salty water fishing? You use wd40 to clean outside? And also wich oil and Grease to use? I don't have acces to fishing reel lubricants, like penn abu garcis etc. Also, the bearings of the fathom 2 are ceramic? If not, it worth yo upgrade yo ceramic ones?. Thanks and have a Nice day

@BradHemedes

2 жыл бұрын

I just rinse mine with fresh water but don’t use pressure. You use WD40 to remove dirty grease. You can use singer oil and superlube synthetic grease.

@BradHemedes

2 жыл бұрын

I believe the Penn has stainless bearing. I don’t know much about ceramic bearings. If you need to replace the bearings. I would suggest use OEM parts.

Hi do you know how to unscrew the drag knob on the new generation pen fathom ii ld 2 speed? You have to pull the knob to adjust it. Also my free spool was very bad so I was thinking to take apart just the drag knob and not the reel handle and put oil in parts where the spool rotates, does that sound like the right thing to do?

@BradHemedes

11 ай бұрын

I'm sorry, I do not. But I would bet it is also the same if the mechanism to disengage the low gear is to turn the ring over the button. if you want lubricate the spool bearing you can remove the side plates without removing the handle. nice thing about my Penn and Avet lever drag.

@nancyn3863

11 ай бұрын

Thank you brad this video has been a tremendous help to me. The new models drag adjustment knob requires that you pull it out to turn it. I know you have to remove this knob to get to the spool bearings. So I’m going to try and loosen it while pulling it out at the same time.

@BradHemedes

11 ай бұрын

Oh yes, you have to remove the drag preset knob.

ganda nman nyan master/idol.....baka may pibaglumaan kba dyan n fishing gear master.....baka sakali lng....ingat po kayo lagi master/idol BRADLY

@BradHemedes

2 жыл бұрын

Wala e

@rapsodhyfishingadventure6073

2 жыл бұрын

@@BradHemedes salamat master,godbless po

Thank you. The draw washer can be removed?

@BradHemedes

3 жыл бұрын

Yes if you want to disassemble the main gears.

@BradHemedes

3 жыл бұрын

I’m sorry I didn’t understand your question. Do you mean “Drag Washer”. If that’s the case, no it’s glued to the spool.

@napok10

3 жыл бұрын

@@BradHemedes I mean the drag washer. So it is not posssible to replace the drag washer?

@BradHemedes

3 жыл бұрын

I stand corrected. I double checked the schematic. The drag washer can be replaced. It is just held in place by a retaining ring.

where can i buy the abu garcia or other c-clip removal tool ? been searching online and cant find one>

@BradHemedes

Жыл бұрын

Mine is no longer available in Amazon. This is what found. NEIKO 01970A E-Clip Remover & Installer Tool Set | 4 Piece | SAE | 1/4" to 3/8" a.co/d/g5yqnBS

2nd time using my 40nld, and it stopped engaging. Had to put it on sunset to get my line in. What should I look into?

@BradHemedes

Жыл бұрын

The knob by the lever drag maybe too loose.

@agoodhi

Жыл бұрын

@@BradHemedes was working fine all day until the end 😢 luckily I didn't hook a tuna and dump my spool

@BradHemedes

Жыл бұрын

Hopefully just a loose preset knob. LMK

is the handle same as FTH15XNLD2 ?

@BradHemedes

5 ай бұрын

Sorry not sure.

My reel is backwards .when on full strike it's on free spool.. and vise versa. Any ideas?

@BradHemedes

3 жыл бұрын

It happened to me. It was because I was under and over tightening the preset knob. Position the lever to "free" then loosen the preset knob. Tighten little by little until drag engages. Hope that helps.

Hii...i get interested with your c clip tool...where can i get it..can you send me a link to buy it..tq

@BradHemedes

14 күн бұрын

a.co/d/04mVqPct

Hi, it's brass pinion gear or stainless steel?? Because in the box say that 'stainless steel main gear and pinion gear'

@BradHemedes

2 жыл бұрын

Definitely Stainless main gear. Forgot about the pinion.

@aquilapower9300

2 жыл бұрын

Hmmm.. But the pinion looks like brass gear. How about durability this reel?

@BradHemedes

2 жыл бұрын

To tell you honestly I don’t use the reel to much. It’s too big for the type of fishing I do. But I know someone in the Philippines who uses a fathom lever drag single speed almost every day and he said it was dependable . He did have to service the reel every 2 months though.

@aquilapower9300

2 жыл бұрын

Ya, i think this reel dependable for heavy fishing. Thx too much for your information 👍

Pang malakihan talaga

Please, when you remove a part or assembly, turn it all around on camera so we can see it, before you set it down off camera.

@BradHemedes

8 ай бұрын

Noted

Sir, good day! Magkano po yung PENN FATHOM 25NLD convert to peso? Kagaya nun pinadala mo kay Sir Richard Molina. Salamat po. God bless.

@BradHemedes

3 жыл бұрын

mga 9K master. mababa dollar ngayon

@MsLifesavers

3 жыл бұрын

@@BradHemedes malaki ba yung shipping fee sakaling magpabili ako dyan Sir..hehehe..pcnsya na Sir ha! Salamat.

@BradHemedes

3 жыл бұрын

Yan po di ko alam e.

@MsLifesavers

3 жыл бұрын

@@BradHemedes okay Sir, salamat.

Is the drag washer glued to the spool?

@BradHemedes

Жыл бұрын

No it’s not. It held by a ring retainer in the center of the spool.